<
>
Specifications
Inductance @ Frequency:
-
Insulation Resistance(IR):
10MΩ
Operating Temperature:
-55℃~+125℃
DC Resistance(DCR):
113mΩ
Voltage Rating - DC:
50V
Number of Lines:
-
Voltage Withstand:
50V
Mfr. Part #:
AWPC00453226102M00
Package:
SMD,4.5x3.2mm
Key Attributes
Model Number:
AWPC00453226102M00
Product Description
Product Overview
The AWPC00453226 Series is a range of AEC-Q200 qualified inductors designed for automotive applications. These components are halogen-free, RoHS compliant, and REACH compliant, ensuring adherence to environmental and safety standards. They are engineered to operate reliably within a wide temperature range, making them suitable for demanding automotive environments.
Product Attributes
- Brand: Chilisin
- Series: AWPC00453226
- Certifications: AEC-Q200, Automotive Grade, Halogen Free, RoHS Compliant, REACH Compliant
- Construction: Ferrite core and cover sheet, copper wire, Ag/Cu/Ni/Sn terminals.
Technical Specifications
| Part Number | Test Freq. (MHz) | RDC (m) Max | IDC (A) Max | Insulation Resistance (M) Min. | Rated Voltage (Vdc) Max. | Tolerance (%) |
|---|---|---|---|---|---|---|
| AWPC0045322660000 | 60 | 100 | 3.0 | 10 | 50 | 20/25 |
| AWPC0045322690000 | 90 | 100 | 3.9 | 10 | 50 | 20/25 |
| AWPC0045322623100 | 230 | 100 | 4.7 | 10 | 50 | 20/25 |
| AWPC0045322633100 | 330 | 100 | 5.8 | 10 | 50 | 20/25 |
| AWPC0045322642100 | 420 | 100 | 6.0 | 10 | 50 | 20/25 |
| AWPC0045322650100 | 500 | 100 | 10.1 | 10 | 50 | 20/25 |
| AWPC00453226601M00 | 600 | 100 | 8.2 | 10 | 50 | 20/25 |
| AWPC0045322670100 | 700 | 100 | 8.5 | 10 | 50 | 20/25 |
| AWPC0045322680100 | 800 | 100 | 8.9 | 10 | 50 | 20/25 |
| AWPC0045322690100 | 900 | 100 | 11.0 | 10 | 50 | 20/25 |
| AWPC0045322610200 | 1000 | 100 | 11.3 | 10 | 50 | 20/25 |
| AWPC0045322614200 | 1400 | 100 | 14.8 | 10 | 50 | 20/25 |
| AWPC0045322620200 | 2000 | 100 | 15.0 | 10 | 50 | 20/25 |
Note: Tolerance M:20%, Y :25%
Operating Temperature Range: -55 ~ 125 (Including self-temperature rise)
Storage Temperature: -40 ~ 125 (For after assembly)
Z Test Frequency: 100MHz, 0.1V
RDC: Single wire test value
Irms: For a 15 temperature rise from 25 ambient.
Reliability
Mechanical Performance
- Board Flex: Substrate Dimension: 100x40x1.6mm, Deflection: 2.0mm, Keeping Time: 60 sec. Forces applied must not damage terminal electrode and ferrite.
- Terminal Strength: Force of 2 Lbs for 60 seconds. Must not damage terminal electrode and ferrite.
- Solderability: Electrodes shall be at least 95% covered with new solder coating. Pre-heating: 150, 1min. Solder Composition: Sn/3.0Ag/0.5Cu. Solder Temperature: 2455. Immersion Time: 41sec.
- Resistance to Soldering Heat: Inductance change shall be within 20%. Pre-heating: 150, 1min. Solder Composition: Sn/Ag3.0/Cu0.5. Solder Temperature: 2605. Immersion Time: 101sec.
- Resistance to Solvents: No change in appearance or obliteration of marking. Inductors must withstand 6 minutes of alcohol or water.
- Mechanical Shock: Pulse shape: Half-sine waveform, Impact acceleration: 100 g, Pulse duration: 6 ms, Number of shocks: 18 shocks (3 shocks for each face), Orientation: Bottom, top, left, right, front and rear faces. Forces applied must not damage terminal electrode and ferrite.
- Vibration: Vibration waveform: Sine waveform, Vibration frequency: 10Hz~2000Hz, Vibration acceleration: 5g, Sweep rate: 0.764386 octave/minute, Duration of test: 12 cycles each of 3 orientations (20 minutes for each cycle), Vibration axes: X, Y & Z. Appearance: No damage. Inductance change shall be within 20%.
Environmental Performance
- High Temperature Exposure (Storage): Temperature: 1253, Time: 1000hrs. Appearance: No damage. Inductance change shall be within 20% (Measured after exposure in room condition for 24hrs).
- Low Temperature Exposure (Storage): Temperature: -553, Time: 1000hrs. Inductance change shall be within 20% (Measured after exposure in room condition for 24hrs).
- Biased Humidity: Temperature: 852, Relative Humidity: 85%, Time: 1000hrs. Inductance change shall be within 20% (Measured after exposure in room condition for 24hrs).
- Temperature Cycling: Total cycles: 1000 cycles. Temperature Cycling Test Conditions: -55 to +125 . Soak Mode Condition: 30 minutes. Inductance change shall be within 20% (Measured after exposure in room condition for 24hrs).
- Operational Life: Temperature: 1252, Applied Current: Rated Current, Time: 1000 24 hrs. Inductance change shall be within 20% (Measured after exposure in room condition for 24hrs).
- ESD Test: Contact Discharge: 6KV, 12KV, 16KV, 25KV. Air Discharge: 6KV, 12KV, 16KV, 25KV. Discharge interval: 1 second (Contact), <5 seconds (Air). Polarity: Positive and negative. Number of discharge: Discharge +/- for 1 time for the 2 test points (Contact), Discharge +/- for 1 time for the 1~2 test points (Air).
Packaging
Packaging Quantity
| Type | PCS/Reel |
|---|---|
| 453226 | 2500 |
Reel Dimensions (mm)
| Type | A | B | C | D |
|---|---|---|---|---|
| 453226 | 330 | 100 | 13 | 13.4 |
Tape Dimensions (mm)
| Type | B0 | K0 | F | E | W | P | P0 | P2 | |
|---|---|---|---|---|---|---|---|---|---|
| 453226 | 4.9 | 3.0 | 1.75 | 5.50 | 12 | 8 | 4 | 2 | 11 |
Recommended Land Pattern (mm)
| Type | G | H | I |
|---|---|---|---|
| 453226 | 3.4 | 3 | 5.9 |
Note on Land Pattern:
- A0: 3.6
- D: 1.5
- F: 0.6
General Notes:
- Ensure product evaluation and confirmation against specifications when mounted.
- Avoid knocking or dropping the product.
- Use the product only for the purpose, under the condition, and in the environment agreed upon.
- Storage period is less than 12 months. Follow storage conditions (Temperature: 5 to 40C, Humidity: 10 to 75% RH or less). Terminal electrode soldering may deteriorate if the storage period elapses.
- Do not use or store in locations with conditions such as gas corrosion (salt, acid, alkali, etc.).
2410121936_Chilisin-AWPC00453226102M00_C7419440.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
