Aluminum Electrolytic Capacitors - GR Series
The GR Series Aluminum Electrolytic Capacitors are designed for high-performance applications, offering a 105 operating temperature range, extended life (2000-4000 Hours), high ripple current, and low impedance. They are suitable for various electronic products requiring reliable and durable capacitor solutions.
Product Attributes
- Brand: Cheng Xing ()
- Origin: Dongguan, Guangdong, China
- Product Type: Aluminum Electrolytic Capacitor
- Series: GR Series
- Certifications: Compliant with JIS C-5101-4 (IEC 60384)
Technical Specifications
| Item | Performance Characteristics | Details |
| Operating Temperature Range | -40 ~ +105 | |
| Rated Working Voltage Range | 6.3 ~ 100V | |
| Nominal Capacitance Range | 2.2 ~ 4700F | |
| Capacitance Tolerance | 20% (120Hz,+20) | |
| Leakage Current | L0.01CV or 3(A) | Whichever is greater measured after 2 minutes application of rated working voltage at +20 |
| Dissipation Factor (tan ) at 120Hz,+20 | 0.22 (6.3V) to 0.08 (100V) | For capacitance value>1000F, add 0.02 per another 1000F |
| Low Temperature Characteristics (120Hz) | Z-25/Z+20: 2 to 4; Z-40/Z+20: 3 to 8 | Varies by voltage |
| High Temperature Loading (Load Life) | 2000Hrs (D:5~6.3), 3000Hrs (D:8~10), 4000Hrs (D12.5) at 105 | Capacitance change within 20%, tan 200% of initial, LC initial specified value |
| Shelf Life (High Temperature No Load) | 1000 Hr at 105 | Capacitance change within 20%, tan 200% of initial, LC initial specified value |
| Ripple Current & Frequency Multipliers | See table | Multipliers for different frequencies and capacitances |
Standard Ratings (Example)
| Voltage(Code) | Cap.(F) | DxL(mm) | IMP() | R.C(mA/rms at 100kHz,105) |
| 6.3V | 100 | 5*11 | 0.580 | 140 |
| 6.3V | 120 | 5*11 | 0.530 | 165 |
| 6.3V | 150 | 6.3*12 | 0.250 | 185 |
| 10V | 100 | 5*11 | 0.58 | 140 |
| 10V | 120 | 5*11 | 0.53 | 140 |
| 10V | 150 | 6.3*12 | 0.25 | 340 |
| 16V | 100 | 6.3*12 | 0.250 | 300 |
| 16V | 120 | 6.3*12 | 0.250 | 320 |
| 16V | 150 | 6.3*12 | 0.250 | 340 |
| 25V | 33 | 6.3*12 | 0.500 | 230 |
| 25V | 39 | 6.3*12 | 0.500 | 295 |
| 25V | 47 | 6.3*12 | 0.250 | 300 |
| 35V | 33 | 6.3*12 | 0.500 | 265 |
| 35V | 39 | 6.3*12 | 0.250 | 315 |
| 35V | 47 | 8*12 | 0.420 | 515 |
| 50V | 33 | 6.3*12 | 0.250 | 300 |
| 50V | 39 | 8*12 | 0.420 | 535 |
| 50V | 47 | 8*12 | 0.420 | 555 |
| 63V | 15 | 6.3*12 | 1.880 | 115 |
| 63V | 22 | 8*12 | 1.530 | 230 |
| 63V | 27 | 8*12 | 1.320 | 232 |
| 100V | 15 | 6.3*12 | 1.050 | 115 |
| 100V | 22 | 6.3*12 | 1.050 | 120 |
| 100V | 27 | 6.3*12 | 1.050 | 125 |
Usage Notes
Circuit Design: Use within rated performance limits. Avoid high temperatures, overcurrent, overvoltage, reverse voltage, AC voltage, and rapid charge/discharge circuits. Select capacitors with a lifespan comparable to the machine. Ensure isolation between capacitor casing, terminals, and circuitry. If casing insulation is insufficient, do not use. Avoid contact with water, saltwater, oil, condensation, or environments with harmful gases, direct sunlight, ozone, UV, or radiation. Ensure vibration and shock do not exceed specified limits. Ensure proper spacing for positive and negative terminals and adequate space above the safety vent.
Assembly & Installation: Prevent direct contact between terminals and avoid short circuits. Ensure the capacitor is installed in an environment free from water, oil, condensation, direct sunlight, ozone, UV, radiation, or harmful gases. Avoid excessive vibration and shock. Ensure correct polarity and that the capacitor is not dropped or deformed. Use appropriate insertion force for automatic insertion machines. When soldering, avoid solder adhering to non-terminal parts, follow specified temperature, time, and number of cycles, do not immerse the capacitor in solder, and prevent other products from falling onto the capacitor.
Maintenance & Disposal: Regular inspections are required for factory-installed capacitors. In case of accidental safety vent opening, disconnect power immediately. If the vent operates, avoid direct contact with ejected gas and flush eyes with water if exposed. Wash skin with soap if electrolyte contacts it. Dispose of waste capacitors by puncturing/crushing and incineration, or by handing over to specialized recyclers.
2410121240_Chengx-GR106M025D11RR0VH4FP0_C19576.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
