86--15347289033
feliciazhou@pa.ecer.com
Online Service

Online Service

Contact Person
feliciazhou@pa.ecer.com
8615347289033
+86 136 6733 2386
quality Aluminum Electrolytic Capacitor Chengx GR158M025G25RR0VL4FP0 with Wide Voltage and Temperature Range factory
<
quality Aluminum Electrolytic Capacitor Chengx GR158M025G25RR0VL4FP0 with Wide Voltage and Temperature Range factory
>
Specifications
Operating Temperature:
-40℃~+105℃
Lifetime:
3000hrs@105℃
Capacitance:
1500uF
Height - Seated (Max):
25mm
Pin Spacing:
5mm
Voltage Rating:
25V
Diameter:
10mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
1.65A@100kHz
Mfr. Part #:
GR158M025G25RR0VL4FP0
Package:
Through Hole,D10xL25mm
Key Attributes
Model Number: GR158M025G25RR0VL4FP0
Product Description

Aluminum Electrolytic Capacitors - GR Series

The GR Series Aluminum Electrolytic Capacitors are designed for high-reliability applications, offering features such as 105 operating temperature, extended life (2000-4000 hours), high ripple current, and low impedance. These capacitors are suitable for various industrial and electronic applications where robust performance and longevity are critical.

Product Attributes

  • Brand: Cheng Xing ()
  • Product Type: Aluminum Electrolytic Capacitor ()
  • Series: GR Series
  • Origin: Dongguan City, Guangdong Province, China
  • Certifications: Compliant with JIS C-5101-4 (IEC 60384) standards.

Technical Specifications

Item Performance Characteristics Value
Operating Temperature Range -40 ~ +105
Rated Working Voltage Range 6.3 ~ 100V
Nominal Capacitance Range 2.2 ~ 4700F
Capacitance Tolerance 20%(120Hz,+20)
Leakage Current L0.01CV or 3(A) (after 2 mins at +20)
Dissipation Factor (tan ) See table below (120Hz,+20)
Low Temperature Characteristics See table below (120Hz)
Load Life 2000Hrs(D:5~6.3), 3000Hrs(D:8~10), 4000Hrs(D12.5) at 105
Shelf Life 1000 Hr at 105
Ripple Current & Frequency Multipliers See table below

Dissipation Factor (tan ) at 120Hz, +20

Working Voltage (V) 6.3 10 16 25 35 50 63 100
tan (max) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08

For capacitance value > 1000F, add 0.02 per another 1000F.

Low Temperature Characteristics (120Hz)

Working Voltage (V) 6.3 10 16 25 35 50 63 100
Z-25/Z+20 4 3 2 2 2 2 2 2
Z-40/Z+20 8 6 4 3 3 3 3 3

Ripple Current & Frequency Multipliers

Freq.(Hz) Cap.(F) 50(60) 120 1k 10k 100k
~33 0.40 0.55 0.80 0.90 1.00
39~330 0.60 0.70 0.90 0.95 1.00
390~1000 0.65 0.80 0.98 1.00 1.00
1200~ 0.80 0.90 0.98 1.00 1.00

Standard Ratings (D x L mm; Ripple Current mA/rms at 100kHz, 105)

Voltage (Code) Cap.(F) D x L IMP R.C D x L IMP R.C D x L IMP R.C D x L IMP R.C D x L IMP R.C D x L IMP R.C
6.3V 100 5*11 0.580 140 5*11 0.580 140 6.3*12 0.250 300
120 5*11 0.530 165 5*11 0.530 140 6.3*12 0.250 320
150 6.3*12 0.250 185 6.3*12 0.250 340 6.3*12 0.220 340 8*12 0.150 500
180 6.3*12 0.250 255 6.3*12 0.250 340 6.3*12 0.220 340 8*12 0.150 580
220 6.3*12 0.250 275 6.3*12 0.220 340 6.3*12 0.220 340 8*12 0.150 600
270 6.3*12 0.220 280 6.3*12 0.220 340 8*12 0.150 640
330 6.3*12 0.220 340 6.3*12 0.220 340 8*12 0.130 640 8*12 0.130 580
390 8*12 0.130 600 8*12 0.130 640 8*12 0.130 640
470 8*12 0.130 640 8*12 0.130 640 8*12 0.130 640 10*13 0.100 865
560 8*12 0.130 640 8*12 0.130 640 10*13 0.100 880
10V 100 5*11 0.580 140 5*11 0.580 140 6.3*12 0.250 300
120 5*11 0.530 165 5*11 0.530 140 6.3*12 0.250 320
150 6.3*12 0.250 185 6.3*12 0.250 340 6.3*12 0.220 340 8*12 0.150 500
180 6.3*12 0.250 255 6.3*12 0.250 340 6.3*12 0.220 340 8*12 0.150 580
220 6.3*12 0.250 275 6.3*12 0.220 340 6.3*12 0.220 340 8*12 0.150 600
270 6.3*12 0.220 280 6.3*12 0.220 340 8*12 0.150 640
330 6.3*12 0.220 340 6.3*12 0.220 340 8*12 0.130 640 8*12 0.130 580
390 8*12 0.130 600 8*12 0.130 640 8*12 0.130 640
16V 100 5*11 0.580 140 5*11 0.580 140 6.3*12 0.250 300
120 5*11 0.530 165 5*11 0.530 140 6.3*12 0.250 320
150 6.3*12 0.250 185 6.3*12 0.250 340 6.3*12 0.220 340 8*12 0.150 500
180 6.3*12 0.250 255 6.3*12 0.250 340 6.3*12 0.220 340 8*12 0.150 580
220 6.3*12 0.250 275 6.3*12 0.220 340 6.3*12 0.220 340 8*12 0.150 600
270 6.3*12 0.220 280 6.3*12 0.220 340 8*12 0.150 640
330 6.3*12 0.220 340 6.3*12 0.220 340 8*12 0.130 640 8*12 0.130 580
25V 33 6.3*12 0.500 230 39 6.3*12 0.500 265 47 6.3*12 0.250 300
47 6.3*12 0.500 295 56 6.3*12 0.250 315 8*12 0.420 515
56 6.3*12 0.250 315 68 6.3*12 0.240 340 8*12 0.420 535
68 6.3*12 0.220 320 82 6.3*12 0.230 625 8*12 0.420 555
82 6.3*12 0.220 340 100 8*12 0.220 640 10*13 0.200 760
100 8*12 0.200 565 120 8*12 0.200 655 8*16 0.200 730 10*13 0.200 780
120 8*12 0.180 580 150 8*12 0.180 670 10*17 0.130 825
150 8*12 0.150 600 180 8*12 0.150 600 8*20 0.130 825 10*17 0.130 855
180 8*12 0.130 620 220 8*12 0.130 640 10*17 0.130 875
220 8*12 0.130 640 270 8*12 0.130 665 8*20 0.100 1050 10*17 0.075 865
35V 39 6.3*12 0.500 265 47 6.3*12 0.250 300 56 6.3*12 0.250 315
47 6.3*12 0.250 300 56 6.3*12 0.250 315 8*12 0.420 515
56 6.3*12 0.250 315 68 6.3*12 0.240 340 8*12 0.420 535
68 6.3*12 0.240 340 82 6.3*12 0.230 625 8*12 0.420 555
82 6.3*12 0.230 625 100 8*12 0.220 640 10*13 0.200 760
100 8*12 0.220 640 120 8*12 0.200 655 8*16 0.200 730 10*13 0.200 780
120 8*12 0.200 655 150 8*12 0.180 670 10*17 0.130 825
150 8*12 0.180 670 180 8*12 0.150 600 8*20 0.130 825 10*17 0.130 855
50V 47 6.3*12 0.250 300 56 6.3*12 0.250 315 8*12 0.420 515
56 6.3*12 0.250 315 68 6.3*12 0.240 340 8*12 0.420 535
68 6.3*12 0.240 340 82 6.3*12 0.230 625 8*12 0.420 555
82 6.3*12 0.230 625 100 8*12 0.220 640 10*13 0.200 760
100 8*12 0.220 640 120 8*12 0.200 655 8*16 0.200 730 10*13 0.200 780
120 8*12 0.200 655 150 8*12 0.180 670 10*17 0.130 825
150 8*12 0.180 670 180 8*12 0.150 600 8*20 0.130 825 10*17 0.130 855
63V 15 6.3*12 1.880 115 22 6.3*12 1.050 115 8*12 1.530 230
22 6.3*12 1.050 115 27 6.3*12 1.050 120 8*12 1.320 232
27 6.3*12 1.050 120 33 6.3*12 1.050 125 8*12 1.280 330
33 6.3*12 1.050 125 39 8*12 0.800 200 8*16 0.980 300
39 8*12 0.800 200 47 8*12 0.780 212 10*13 0.650 370
47 8*12 0.780 212 56 8*12 0.760 222 8*20 0.480 362
56 8*12 0.760 222 68 8*12 0.750 234 10*17 0.460 357
100V 15 6.3*12 1.880 115 22 6.3*12 1.050 115 8*12 1.530 230
22 6.3*12 1.050 115 27 6.3*12 1.050 120 8*12 1.320 232
27 6.3*12 1.050 120 33 6.3*12 1.050 125 8*12 1.280 330
33 6.3*12 1.050 125 39 8*12 0.800 200 8*16 0.980 300
39 8*12 0.800 200 47 8*12 0.780 212 10*13 0.650 370

Usage Precautions

Circuit Design: Use within specified rated performance. Avoid high temperature, overcurrent, overvoltage, reverse voltage, AC voltage, and rapid charge/discharge. Select capacitors with a lifespan comparable to the machine. Consult R&D for special requirements.

Isolation: Ensure complete isolation between capacitor casing, terminals, and circuits.

Environment: Avoid contact with water, saltwater, oil, condensation, corrosive gases (sulfides, H2SO3, HNO3, CL2, ammonia), direct sunlight, ozone, UV radiation, radioactive substances, and excessive vibration/shock.

Installation: Ensure correct polarity, proper hole spacing, adequate space above the vent, and avoid placing other components or wiring near the vent. Minimize heat-generating components around the capacitor. For screw terminals, ensure pressure valve faces upwards when vertical, or upwards/positive terminal when horizontal.

Assembly: Prevent direct contact between terminals and short circuits. Ensure the assembly environment meets the specified conditions (temperature, humidity, exposure to light/radiation, harmful gases, vibration/shock).

Soldering: Avoid solder on terminals other than intended. Adhere to specified soldering conditions (temperature, time, cycles). Do not immerse the capacitor body in solder. Prevent other products from falling onto the capacitor during soldering.

Cleaning: Do not clean with detergents. If cleaning is necessary, follow product specifications regarding cleaning agents, conductivity, pH, specific gravity, moisture, and drying procedures. Avoid halogenated fixatives and resin coatings.

Storage: Store indoors at 5-30 and below 75% humidity. Do not store in environments prohibited during assembly or use.

Disposal: Puncture or crush and incinerate, or hand over to a specialized waste recycling service.

Accidents: In case of vent opening, disconnect power. Keep face away from vent. Flush eyes with water if sprayed. Do not ingest electrolyte. Wash skin with soap if contacted.

Fumigation: Use caution with halide fumigation (e.g., potassium bromide) for overseas export, as it may cause corrosion. Ensure fumigant does not directly contact products and allow for thorough drying.


2410121240_Chengx-GR158M025G25RR0VL4FP0_C44597.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max