Aluminum Electrolytic Capacitors - KM Series
The KM Series Aluminum Electrolytic Capacitors are designed for reliable performance with a 105 operating temperature and a life expectancy of 1000-2000 hours. They are suitable for various applications requiring stable capacitance and voltage ratings.
Product Attributes
- Brand: Cheng Xing ()
- Origin: Dongguan, Guangdong, China
- Series: KM Series
- Material: Aluminum Electrolytic
- Certifications: Compliant with JIS-C-5101-4 (IEC 60384) standards.
Technical Specifications
| Item | Performance Characteristics | Specifications |
| Operating Temperature Range | -40 ~ +105 (Standard: -25 ~ +105 ) | |
| Rated Working Voltage Range | 6.3 ~ 250V (Standard); 350~ 450V (Special) | |
| Nominal Capacitance Range | 0.1 ~ 33000F | |
| Capacitance Tolerance | 20% (120Hz, +20) | |
| Leakage Current | L0.01CV or 3(A), whichever is greater (measured after 2 minutes at rated voltage, +20) | |
| tan (max) (120Hz, +20) | For 6.3~100V | 0.26 to 0.08 |
| tan (max) (120Hz, +20) | For 160~450V | 0.20 to 0.24 |
| Low Temperature Characteristics (120Hz) | Z-25 /Z+20 | 5 to 15 (depending on voltage) |
| Low Temperature Characteristics (120Hz) | Z-40 /Z+20 | 10 to 15 (depending on voltage) |
| Load Life | 1000Hrs (D6.3), 2000Hrs (D8) at 105 | Capacitance change within 20%, tan 200% of initial, LC initial specified value. |
| Shelf Life | 1000 Hrs at 105 (no load) | Capacitance change within 20%, tan 200% of initial, LC initial specified value. |
Standard Ratings (Partial List)
| Voltage (Code) | Cap. (F) | D x L (mm) | Ripple Current (mA/rms at 120Hz, 105) |
| 6.3V | 4.7 | 5*11 | 26 |
| 6.3V | 10 | 5*11 | 35 |
| 6.3V | 22 | 5*11 | 153 |
| 6.3V | 100 | 5*11 | 95 |
| 10V | 4.7 | 5*11 | 38 |
| 10V | 10 | 5*11 | 57 |
| 10V | 22 | 5*11 | 212 |
| 10V | 100 | 5*11 | 139 |
| 16V | 4.7 | 5*11 | 44 |
| 16V | 10 | 5*11 | 54 |
| 16V | 22 | 6.3*12 | 213 |
| 16V | 100 | 6.3*12 | 159 |
| 25V | 4.7 | 5*11 | 59 |
| 25V | 10 | 5*11 | 57 |
| 25V | 22 | 8*12 | 285 |
| 25V | 100 | 8*12 | 229 |
| 35V | 0.47 | 5*11 | 7 |
| 35V | 1 | 5*11 | 10 |
| 35V | 2.2 | 5*11 | 20 |
| 35V | 10 | 5*11 | 41 |
| 50V | 0.15 | 5*11 | 1.5 |
| 50V | 0.22 | 5*11 | 3 |
| 50V | 0.33 | 5*11 | 4 |
| 50V | 1 | 5*11 | 16 |
| 63V | 0.22 | 5*11 | 3 |
| 63V | 0.33 | 5*11 | 4 |
| 63V | 0.47 | 5*11 | 7 |
| 63V | 1 | 5*11 | 13 |
| 100V | 0.33 | 5*11 | 4 |
| 100V | 0.47 | 5*11 | 7 |
| 100V | 1 | 5*11 | 13 |
| 100V | 2.2 | 5*11 | 27 |
| 160V | 0.47 | 6.3*12 | 8 |
| 160V | 1 | 6.3*12 | 17 |
| 160V | 2.2 | 6.3*12 | 27 |
| 160V | 3.3 | 6.3*12 | 30 |
| 200V | 0.47 | 6.3*12 | 15 |
| 200V | 1 | 6.3*12 | 18 |
| 200V | 2.2 | 8*12 | 30 |
| 200V | 3.3 | 8*12 | 35 |
| 220V | 0.47 | 6.3*12 | 19 |
| 220V | 1 | 6.3*12 | 19 |
| 220V | 2.2 | 8*12 | 29 |
| 220V | 3.3 | 8*12 | 35 |
| 250V | 0.47 | 6.3*12 | 15 |
| 250V | 1 | 6.3*12 | 15 |
| 250V | 2.2 | 8*12 | 24 |
| 250V | 3.3 | 8*12 | 29 |
| 350V | 0.47 | 6.3*12 | 8 |
| 350V | 1 | 6.3*12 | 18 |
| 350V | 2.2 | 8*12 | 30 |
| 350V | 3.3 | 8*12 | 35 |
| 400V | 0.47 | 6.3*12 | 19 |
| 400V | 1 | 6.3*12 | 19 |
| 400V | 2.2 | 8*12 | 29 |
| 400V | 3.3 | 8*12 | 35 |
| 420V | 0.47 | 6.3*12 | 15 |
| 420V | 1 | 6.3*12 | 15 |
| 420V | 2.2 | 8*12 | 24 |
| 420V | 3.3 | 8*12 | 29 |
| 450V | 0.47 | 6.3*12 | 15 |
| 450V | 1 | 6.3*12 | 15 |
| 450V | 2.2 | 8*12 | 24 |
| 450V | 3.3 | 8*12 | 29 |
Usage Precautions
Circuit Design: Use within rated performance. Avoid high temperature, overcurrent, overvoltage, reverse voltage, and rapid charge/discharge. Ensure proper isolation between capacitor terminals and other circuit components. Select capacitors with a lifespan comparable to the machine's life. Consult R&D for special requirements.
Component Installation: Ensure terminals do not short circuit. Avoid contact with water, oil, or condensation. Protect from direct sunlight, ozone, UV, and radiation. Avoid environments with harmful gases. Ensure proper mounting hole alignment and space for the safety vent. Avoid placing heat-generating components near the capacitor. For double-sided PCBs, avoid mounting over excess holes. Ensure current and voltage balance in parallel/series connections.
Assembly & Soldering: Do not let terminals short circuit. Use appropriate soldering temperature and time. Do not immerse the capacitor body in solder. Avoid physical stress on the capacitor after soldering. Do not use cleaning agents unless specified, and ensure proper drying. Avoid halogen-containing fixatives. For screw-type products, ensure pressure valve is oriented upwards during vertical installation.
Maintenance & Storage: Regular inspections are required. Store in a cool, dry indoor environment (5-30, <75% humidity). Avoid storage conditions similar to those prohibited during use.
Accidents: In case of safety vent activation, disconnect power. Keep face away from escaping gas. Flush eyes with water if exposed to gas. Wash skin with soap if electrolyte contacts it.
Fumigation: Use caution with halogen-based fumigation for export, as it may cause corrosion. Ensure products are not in direct contact with fumigant and are thoroughly dried.
Disposal: Dispose of by puncturing/crushing and incineration, or by returning to specialized recyclers.
2410121312_Chengx-KM106M063D11RR0VH2FP0_C32455.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
