Aluminum Electrolytic Capacitors - KM Series
The KM Series Aluminum Electrolytic Capacitors are designed for reliable performance with a high-temperature rating of 105 and a life expectancy of 1000-2000 hours. These standard capacitors offer a wide operating temperature range and a broad spectrum of capacitance and voltage ratings, making them suitable for various electronic applications.
Product Attributes
- Brand: Cheng Xing ()
- Origin: Dongguan, Guangdong, China
- Series: KM Series
- Material: Aluminum Electrolytic
- Sleeve Color: Various (Transparent yellow, Transparent blue, Silvery, Light purple, etc.)
- Shape: Various (Finite height, Convex, Plane, etc.)
Technical Specifications
| Item | Performance Characteristics | Details |
|---|---|---|
| Operating Temperature Range | -40 ~ +105 | -25 ~ +105 |
| Rated Working Voltage Range | 6.3 ~ 250V (for -40~+105), 350~450V (for -25~+105) | |
| Nominal Capacitance Range | 0.1 ~ 33000F | |
| Capacitance Tolerance | 20% (120Hz, +20) | |
| Leakage Current | L0.01CV or 3(A), l0.03cv+40(A) (Whichever is greater, measured after 2 minutes at rated voltage, +20) | |
| Dissipation Factor (tan ) | Varies by voltage (See detailed table below) | |
| Low Temperature Characteristics (120Hz) | Z-25/Z+20: 5-15; Z-40/Z+20: 3-10 (Varies by voltage, see detailed table below) | |
| Load Life | 1000Hrs (D6.3 | 2000Hrs (D8 |
| Shelf Life | 1000 Hrs (at 105) | |
| Ripple Current & Frequency Multipliers | Factors provided for different frequencies and voltage/capacitance ranges (See detailed table below) | |
| Standards | JIS-C-5101-4 (IEC 60384) | |
| Voltage(Code) | Cap.(F) | DxL (mm) | R.C (mA/rms) |
|---|---|---|---|
| 6.3V | 4.7 | 5*11 | 26 |
| 10 | 5*11 | 35 | |
| 22 | 5*11 | 54 | |
| 47 | 5*11 | 65 | |
| 100 | 5*11 | 95 | |
| 220 | 5*11 | 153 | |
| 470 | 6.3*12 | 258 | |
| 10V | 4.7 | 5*11 | 38 |
| 10 | 5*11 | 57 | |
| 22 | 5*11 | 75 | |
| 47 | 5*11 | 84 | |
| 100 | 5*11 | 139 | |
| 220 | 5*11 | 212 | |
| 470 | 6.3*12 | 299 | |
| 16V | 4.7 | 5*11 | 44 |
| 10 | 5*11 | 54 | |
| 22 | 5*11 | 75 | |
| 47 | 5*11 | 84 | |
| 100 | 6.3*12 | 159 | |
| 220 | 8*12 | 285 | |
| 470 | 10*13 | 471 | |
| 25V | 4.7 | 5*11 | 59 |
| 10 | 5*11 | 65 | |
| 22 | 5*11 | 84 | |
| 47 | 5*11 | 92 | |
| 100 | 6.3*12 | 159 | |
| 220 | 8*12 | 285 | |
| 470 | 10*13 | 471 | |
| 35V | 0.47 | 5*11 | 7 |
| 1 | 5*11 | 10 | |
| 2.2 | 5*11 | 20 | |
| 4.7 | 5*11 | 28 | |
| 10 | 5*11 | 41 | |
| 22 | 5*11 | 67 | |
| 33 | 5*11 | 80 | |
| 50V | 0.15 | 5*11 | 1.5 |
| 0.22 | 5*11 | 3 | |
| 0.33 | 5*11 | 4 | |
| 0.47 | 5*11 | 7 | |
| 1 | 5*11 | 13 | |
| 2.2 | 5*11 | 23 | |
| 3.3 | 5*11 | 30 | |
| 63V | 0.22 | 5*11 | 3 |
| 0.33 | 5*11 | 4 | |
| 0.47 | 5*11 | 7 | |
| 1 | 5*11 | 13 | |
| 2.2 | 5*11 | 23 | |
| 3.3 | 5*11 | 34 | |
| 4.7 | 5*11 | 49 | |
| 100V | 0.33 | 5*11 | 4 |
| 0.47 | 5*11 | 7 | |
| 1 | 5*11 | 13 | |
| 2.2 | 5*11 | 30 | |
| 3.3 | 5*11 | 34 | |
| 4.7 | 5*11 | 40 | |
| 10 | 6.3*12 | 61 | |
| 160V | 0.47 | 6.3*12 | 8 |
| 1 | 6.3*12 | 17 | |
| 2.2 | 6.3*12 | 27 | |
| 3.3 | 6.3*12 | 30 | |
| 4.7 | 6.3*12 | 41 | |
| 10 | 8*12 | 60 | |
| 200V | 1 | 6.3*12 | 18 |
| 2.2 | 6.3*12 | 35 | |
| 3.3 | 6.3*12 | 35 | |
| 4.7 | 8*12 | 40 | |
| 10 | 10*13 | 72 | |
| 22 | 10*17 | 110 | |
| 220V | 2.2 | 6.3*12 | 27 |
| 3.3 | 6.3*12 | 40 | |
| 4.7 | 8*12 | 40 | |
| 10 | 10*13 | 70 | |
| 22 | 10*20 | 125 | |
| 33 | 10*20 | 145 | |
| 250V | 3.3 | 6.3*12 | 30 |
| 4.7 | 8*12 | 45 | |
| 10 | 10*13 | 75 | |
| 22 | 10*20 | 130 | |
| 33 | 13*20 | 184 | |
| 47 | 13*20 | 238 | |
| 350V | 0.47 | 6.3*12 | 15 |
| 1 | 6.3*12 | 19 | |
| 2.2 | 8*12 | 29 | |
| 3.3 | 8*12 | 35 | |
| 4.7 | 10*17 | 52 | |
| 10 | 13*20 | 100 | |
| 400V | 1 | 6.3*12 | 18 |
| 2.2 | 8*12 | 30 | |
| 3.3 | 8*12 | 35 | |
| 4.7 | 10*17 | 78 | |
| 10 | 13*20 | 105 | |
| 18 | 13*20 | 148 | |
| 420V | 1 | 6.3*12 | 19 |
| 2.2 | 8*12 | 29 | |
| 3.3 | 8*12 | 35 | |
| 4.7 | 10*20 | 85 | |
| 10 | 13*25 | 124 | |
| 27 | 13*25 | 160 | |
| 450V | 1 | 6.3*12 | 15 |
| 2.2 | 8*12 | 24 | |
| 3.3 | 8*12 | 29 | |
| 4.7 | 10*17 | 42 | |
| 10 | 13*25 | 84 | |
| 39 | 13*25 | 200 |
Usage Precautions
Circuit Design: Use within rated performance, avoid high temperature, overcurrent, overvoltage, reverse voltage, and rapid charge/discharge. Ensure proper isolation between capacitor terminals and circuitry. Select capacitors with a lifespan comparable to the machine. Discuss special requirements with R&D.
Component Installation: Ensure correct polarity. Do not drop or use deformed capacitors. Terminals should not directly contact. Avoid short circuits. Do not immerse the capacitor body in solder. Ensure proper solder adherence only to terminals. Follow specified soldering conditions (temperature, time, cycles). Avoid other products falling onto the capacitor during soldering.
Assembly & Use: Ensure proper spacing for the explosion-proof valve. Avoid placing components or wiring directly above the valve. Ensure proper alignment with PCB holes. Avoid placing heat-generating components around the capacitor. Ensure proper isolation between capacitor terminals and other circuit elements.
Environment: Avoid contact with water, saltwater, oil, or condensation. Do not use in environments with harmful gases (sulfides, etc.), direct sunlight, ozone, UV, or radioactive substances. Avoid severe vibration and shock beyond specified limits.
Cleaning: Do not use cleaning agents unless specified. If cleaning is necessary, follow product specifications regarding cleaning agents and drying procedures. Avoid halogen-containing fixatives or coating agents.
Storage: Store indoors at 5-30 and below 75% humidity. Avoid storage conditions similar to those prohibited during use.
Maintenance: Regular inspections (visual and performance testing) are required for industrial capacitors.
Accidents: In case of explosion valve activation, disconnect power. Keep face away from venting gas (over 100). Flush eyes with water if gas enters. Do not ingest electrolyte. Wash skin with soap if electrolyte contacts.
Fumigation: Be cautious with halogen-based fumigation (e.g., potassium bromide) for overseas export, as it may cause corrosion. Ensure fumigant does not directly contact products and allow for thorough drying.
Disposal: Dispose of by puncturing/crushing and incineration, or by returning to a specialized recycling service.
2410121312_Chengx-KM477M016F12RR0VH2FP0_C28067.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
