Aluminum Electrolytic Capacitors - KM Series
The KM Series Aluminum Electrolytic Capacitors from Dongguan Shi Cheng Xing Electronics Co., Ltd. are designed for a wide range of applications, offering reliable performance with a 105 operating temperature and a lifespan of 1000-2000 hours. These standard capacitors are suitable for circuits requiring stable electrical characteristics under varying temperatures and frequencies.
Product Attributes
- Brand: Cheng Xing ()
- Origin: Dongguan, China
- Series: KM Series
- Material: Aluminum Electrolytic
- Certifications: Not explicitly stated, but adheres to JIS- C-5101-4 (IEC 60384) standards.
Technical Specifications
| Item | Performance Characteristics | Details |
|---|---|---|
| Operating Temperature Range | -40 ~ +105 (Standard), -25 ~ +105 (Other) | |
| Rated Working Voltage Range | 6.3 ~ 250V (Standard), 350~ 450V (Other) | |
| Nominal Capacitance Range | 0.1 ~ 33000F | |
| Capacitance Tolerance | 20% (120Hz, +20) | |
| Leakage Current | L0.01CV or 3(A) / l0.03cv+40(A) (Whichever is greater, measured after 2 minutes at rated voltage, +20) | |
| Dissipation Factor (tan ) | (max) at 120Hz, +20 | Varies by voltage, e.g., 0.26 for 6.3V, 0.08 for 100V. Increases by 0.02 per 1000F above 1000F. |
| Low Temperature Characteristics | Z-25/Z+20, Z-40/Z+20 (at 120Hz) | Varies by voltage, e.g., Z-25/Z+20 ranges from 2 to 10; Z-40/Z+20 ranges from 3 to 15. |
| Load Life | (at 105) | 1000Hrs (D6.3), 2000Hrs (D8). Capacitance change: 20% of initial. tan : 200% of initial. LC: initial specified value. |
| Shelf Life | (at 105, no load) | 1000 Hrs. Capacitance change: 20% of initial. tan : 200% of initial. LC: initial specified value. |
| Ripple Current Multipliers | (Frequency Correction Factors) | Factors for different frequencies (50Hz, 120Hz, 500Hz, 1kHz, 10kHz~) and voltage/capacitance ranges. |
| Standard Rating: D x L(mm); Ripple Current: mA/rms at 120Hz, 105 | ||||
|---|---|---|---|---|
| Voltage(Code) | Cap.(F) | DxL | R.C | DxL (for higher voltages) |
| 6.3V | 4.7 | 5*11 | 26 | - |
| 6.3V | 10 | 5*11 | 35 | - |
| 6.3V | 22 | 5*11 | 54 | - |
| 6.3V | 100 | 5*11 | 95 | - |
| 6.3V | 330 | 6.3*12 | 216 | - |
| 6.3V | 1000 | 8*12 | 443 | - |
| 6.3V | 3300 | 10*20 | 908 | - |
| 6.3V | 10000 | 16*25 | 1730 | - |
| 10V | 4.7 | 5*11 | 38 | - |
| 10V | 10 | 5*11 | 57 | - |
| 10V | 22 | 5*11 | 75 | - |
| 10V | 100 | 5*11 | 139 | - |
| 10V | 330 | 6.3*12 | 272 | - |
| 10V | 1000 | 10*13 | 586 | - |
| 10V | 3300 | 13*20 | 1090 | - |
| 10V | 10000 | 16*30 | 2015 | - |
| 16V | 4.7 | 5*11 | 38 | - |
| 16V | 10 | 5*11 | 57 | - |
| 16V | 22 | 5*11 | 75 | - |
| 16V | 100 | 5*11 | 125 | - |
| 16V | 330 | 6.3*12 | 315 | - |
| 16V | 1000 | 10*13 | 586 | - |
| 16V | 3300 | 13*20 | 1004 | - |
| 16V | 10000 | 16*30 | 2015 | - |
| 25V | 4.7 | 5*11 | 40 | - |
| 25V | 10 | 5*11 | 61 | - |
| 25V | 22 | 5*11 | 79 | - |
| 25V | 100 | 6.3*12 | 159 | - |
| 25V | 330 | 8*12 | 340 | - |
| 25V | 1000 | 10*17 | 617 | - |
| 25V | 3300 | 13*20 | 787 | - |
| 25V | 10000 | 16*35 | 2330 | - |
| 35V | 0.47 | 5*11 | 1 | - |
| 35V | 1 | 5*11 | 1.5 | - |
| 35V | 2.2 | 5*11 | 20 | - |
| 35V | 10 | 5*11 | 41 | - |
| 35V | 33 | 5*11 | 80 | - |
| 35V | 100 | 6.3*12 | 168 | - |
| 35V | 330 | 10*13 | 419 | - |
| 35V | 1000 | 13*20 | 1023 | - |
| 35V | 3300 | 16*30 | 1808 | - |
| 50V | 0.1 | 5*11 | 1 | - |
| 50V | 0.22 | 5*11 | 3 | - |
| 50V | 1 | 5*11 | 13 | - |
| 50V | 4.7 | 5*11 | 40 | - |
| 50V | 22 | 5*11 | 79 | - |
| 50V | 100 | 6.3*12 | 168 | - |
| 50V | 330 | 10*17 | 510 | - |
| 50V | 1000 | 13*25 | 1089 | - |
| 50V | 3300 | 16*40 | 2600 | - |
| 63V | 0.15 | 5*11 | 1.5 | - |
| 63V | 0.33 | 5*11 | 4 | - |
| 63V | 1 | 5*11 | 16 | - |
| 63V | 4.7 | 5*11 | 49 | - |
| 63V | 22 | 5*11 | 79 | - |
| 63V | 100 | 8*12 | 229 | - |
| 63V | 330 | 10*20 | 510 | - |
| 63V | 1000 | 13*25 | 1160 | - |
| 63V | 3300 | 16*35 | 2008 | - |
| 100V | 0.22 | 5*11 | 3 | - |
| 100V | 0.47 | 5*11 | 7 | - |
| 100V | 1 | 5*11 | 13 | - |
| 100V | 10 | 6.3*12 | 61 | - |
| 100V | 47 | 6.3*12 | 196 | - |
| 100V | 100 | 10*17 | 363 | - |
| 100V | 220 | 16*30 | 480 | - |
| 100V | 680 | 18*35 | 1573 | - |
| 100V | 2200 | 18*35 | 1781 | - |
| 160V | 0.47 | 6.3*12 | 8 | - |
| 160V | 1 | 6.3*12 | 17 | - |
| 160V | 2.2 | 6.3*12 | 27 | - |
| 160V | 10 | 8*12 | 60 | - |
| 160V | 47 | 10*20 | 185 | - |
| 160V | 100 | 13*20 | 330 | - |
| 160V | 270 | 16*30 | 526 | - |
| 160V | 680 | 18*35 | 1573 | - |
| 160V | 2200 | 18*35 | 1781 | - |
| 200V | 1 | 6.3*12 | 17 | - |
| 200V | 2.2 | 6.3*12 | 27 | - |
| 200V | 4.7 | 6.3*12 | 40 | - |
| 200V | 22 | 10*17 | 110 | - |
| 200V | 68 | 13*20 | 224 | - |
| 200V | 150 | 13*20 | 363 | - |
| 200V | 330 | 18*35 | 830 | - |
| 200V | 1000 | 18*35 | 1781 | - |
| 220V | 1 | 6.3*12 | 19 | - |
| 220V | 2.2 | 6.3*12 | 30 | - |
| 220V | 4.7 | 8*12 | 40 | - |
| 220V | 33 | 10*20 | 145 | - |
| 220V | 82 | 13*20 | 266 | - |
| 220V | 180 | 13*20 | 420 | - |
| 220V | 390 | 18*35 | 850 | - |
| 220V | 1500 | 18*40 | 2335 | - |
| 250V | 0.33 | 6.3*12 | 30 | - |
| 250V | 1 | 6.3*12 | 35 | - |
| 250V | 4.7 | 8*12 | 45 | - |
| 250V | 47 | 10*20 | 185 | - |
| 250V | 68 | 13*25 | 250 | - |
| 250V | 100 | 16*25 | 390 | - |
| 250V | 220 | 16*35 | 485 | - |
| 250V | 470 | 18*40 | 880 | - |
| 250V | 1500 | 18*40 | 2335 | - |
| 350V | 0.47 | 6.3*12 | 8 | - |
| 350V | 1 | 6.3*12 | 18 | - |
| 350V | 2.2 | 6.3*12 | 25 | - |
| 350V | 10 | 10*17 | 73 | - |
| 350V | 47 | 13*25 | 215 | - |
| 350V | 100 | 16*25 | 330 | - |
| 350V | 220 | 16*30 | 526 | - |
| 350V | 330 | 18*35 | 830 | - |
| 350V | 680 | 18*40 | 2400 | - |
| 400V | 1 | 6.3*12 | 19 | - |
| 400V | 2.2 | 8*12 | 30 | - |
| 400V | 4.7 | 8*12 | 40 | - |
| 400V | 18 | 13*20 | 100 | - |
| 400V | 68 | 13*25 | 266 | - |
| 400V | 150 | 16*25 | 525 | - |
| 400V | 330 | 18*35 | 830 | - |
| 400V | 470 | 18*40 | 2400 | - |
| 420V | 0.47 | 6.3*12 | 15 | - |
| 420V | 1 | 6.3*12 | 19 | - |
| 420V | 3.3 | 8*12 | 29 | - |
| 420V | 10 | 10*20 | 85 | - |
| 420V | 39 | 13*25 | 200 | - |
| 420V | 100 | 16*25 | 335 | - |
| 420V | 220 | 16*35 | 515 | - |
| 420V | 390 | 18*40 | 904 | - |
| 420V | 560 | 18*45 | 925 | - |
| 450V | 0.47 | 6.3*12 | 15 | - |
| 450V | 1 | 6.3*12 | 15 | - |
| 450V | 2.2 | 8*12 | 24 | - |
| 450V | 10 | 13*25 | 84 | - |
| 450V | 47 | 13*30 | 288 | - |
| 450V | 100 | 16*30 | 305 | - |
| 450V | 220 | 16*35 | 469 | - |
| 450V | 330 | 18*35 | 808 | - |
| 450V | 470 | 18*40 | 1016 | - |
Usage Precautions
Circuit Design: Use within rated performance, avoid high temperature, overcurrent, overvoltage, reverse voltage, and frequent charge/discharge. Ensure capacitors have a lifespan comparable to the machine. Isolate terminals and casing from positive/negative and circuit. Do not use if sleeve insulation is insufficient. Avoid contact with water, saltwater, oil, condensation, or harmful gases. Protect from direct sunlight, ozone, UV, and radiation. Ensure vibration and shock conditions are within specified limits. Ensure correct polarity and spacing for PCB mounting. Avoid mounting heat-generating components near capacitors. For parallel/series connections, ensure current/voltage balancing.
Component Installation: Do not let terminals touch directly. Avoid short circuits. Ensure proper environmental conditions (avoid water, oil, condensation, harmful gases, radiation, excessive vibration/shock). Ensure correct polarity and spacing for PCB mounting. Do not use dropped or deformed capacitors. Use appropriate force for automatic insertion machines.
Soldering: Ensure solder adheres only to terminals. Follow specified soldering temperature, time, and number of times. Do not immerse the capacitor body in solder solution. Avoid other products falling onto the capacitor during soldering.
Cleaning: Do not use cleaning agents unless specified. If cleaning is necessary, follow specifications regarding cleaning agents and drying procedures. Do not use halogenated fixatives or resin coatings.
Assembly Use: If the capacitor's safety vent opens during assembly, disconnect power. Be cautious of hot gas expulsion. Avoid contact with eyes, skin, or ingestion of electrolyte.
Storage: Store indoors at 5-30 with humidity below 75%. Do not store in environments prohibited for use.
Disposal: Puncture or crush and incinerate, or hand over to specialized recyclers.
Fumigation: Be cautious of corrosion from halogenated fumigants when exporting products. Ensure products are not in direct contact with fumigant and are thoroughly dried.
2410121312_Chengx-KM227M035F12RR0VH2FP0_C2063.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
