Product Overview
The MPX-X2 series capacitors from GUANGDONG CHAMPION ELECTRONIC TECHNOLOGY CO., LTD. are designed for safety applications, complying with various international standards. They feature a polypropylene film dielectric with a metalized zinc-aluminum coating, offering reliable performance for general-purpose AC applications.
Product Attributes
- Brand: CHAMPION
- Origin: China
- Material: Polypropylene film, Metalized Zinc-Aluminum
- Certifications: UL, ENEC, IEC, CQC, KC
Technical Specifications
| Parameter | Value |
| Reference Standard | GB/T 6346.14 (IEC 60384-14) |
| Standard Capacity | 0.0014.7F |
| Capacity Error Grade | 5% (J), 10% (K) |
| Rated Voltage (AC) | 250V, 275V, 300V, 310V, 330V, 350V |
| Climatic Category | 40/110/56 |
| Operating Temperature Range | -40~110 |
| Passive Flammability Class | B |
| Voltage Proof (Between Terminals) | UN4.3 DC, 60s |
| Voltage Proof (Between Terminal and Case) | UN x 200+1500Vac, 60sec |
| Dissipation Factor (at 1kHz, 1Vrms Max. at 20) | 10 x 10-4 |
| Insulation Resistance (CR 0.33F) | 15000M |
| Insulation Resistance (CR > 0.33F) | IR x CR 5000s (100Vdc, 60sec / 20) |
Safety Standard Approvals
| Certification Logo | Approval Standards | Certificate Number |
| UL | UL 60384-14 | E477525 |
| ENEC | EN60384-14: 2013 | ENEC-01273-A3 |
| IEC | IEC 60384-14:2013 | 40044148 |
| CQC | GB/T 6346.14-2015 | CQC16001141991 |
| KC | KC 60384-14(2015-09) KC 60384-1(2015-09) | SU03097-17001A SU03097-17002A SU03097-17003A SU03097-17004A SU03097-17005A |
Detection Criteria
| Test Item | Performance Requirement | Test Conditions |
| Withstand Voltage (between leads) | Shall be no abnormality | Rated voltage 430% DC test for 1 minute |
| Withstand Voltage (between lead and enclosure) | Shall be no abnormality | 200% rated voltage +1500VAC test for 1min |
| Range of Capacity | Within the tolerance specified | Voltage: 1Vrms Max, Frequency: 1KHz, Temperature: 20 |
| Dissipation Factor | 0.001 (0.1%) Max | Voltage: 1Vrms Max, Frequency: 1KHz, Temperature: 20 |
| Insulation Resistance | CR 0.33F, IR 15000M CR > 0.33F, IR x CR 5000s | Voltage: 10015VDC, Time: 1min, Temperature: 20 |
| Lead Strength | No line break, no visible damage | Tensile: D0.8mm @ 10N10%, D1.0mm @ 20N10% (101sec) Bending: D0.8mm @ 5N10%, D1.0mm @ 10N10% (490, 2 times) |
| Resistance to Soldering Heat | 1. No visible damage 2. Capacity change rate 5% | No pre-drying, Soldering Temp: 2605, Time: 50.5sec |
| Solderability | N/A | Soldering Temp: 2355, Time: 20.5sec |
| Rapid Change of Temperature | N/A | Lower Limit: -40, Upper Limit: 110, Cycles: 5, Duration: 30 min |
| Climate Category | 1. No visible damage 2. Capacity change rate 5% 3. No permanent breakdown or arcing 4. Insulation resistance 50% of applicable value 5. DF 0.008 (10KHz, CN1F); 0.005 (1KHz, CN>1F) | Dry Heat: Upper Limit: 110, Duration: 16Hrs Damp Heat, Cyclic (Test Db, 1st cycle) Cold: Lower Limit: -40, Duration: 2Hrs Damp Heat, Cyclic (Test Db, remaining cycles) Damp Heat, Steady State: Temp: 40C 2C, Humidity: 933%, Duration: 56 days |
| Durability | N/A | 125% rated voltage, hourly rise to 1000VAC 0.1 seconds, 110 1000 hours |
| Charging and Discharging | N/A | Testing Voltage: 2UNDC, Replication: 10000 Times, Charge/Discharge Time: 1 sec/time |
| Passive Flammability Test | Capacitor shall not continue to burn for more than 10 seconds, and drops shall not ignite cotton paper. | Test duration for actual volume V (mm3): 20 (250 |
Storage Conditions and Duration
Packed capacitors should be stored in a clean, ventilated and dry warehouse, not close to the heat source, not by direct sunlight. It is strictly prohibited to store together with chemical reagents, acids and harmful gases. Temperature should be between 5 and 35, and stored for one year at 75% relative humidity.
2506251635_CHAMPION-SMQP224K310XXE2B23150_C49247342.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible