<
>
Specifications
Capacitance:
1uF
Operating Temperature:
-40℃~+110℃
Ratings:
X2
Voltage(AC):
275V
safety certification:
UL;VDE;ENEC;CQC;KC
Tolerance:
±10%
Mfr. Part #:
SMQP105K275XXF2B28150
Package:
Through Hole,P=27.5mm
Key Attributes
Model Number:
SMQP105K275XXF2B28150
Product Description
Product Overview
The Guangdong Champion Electronic Technology Co., Ltd. offers a range of capacitors designed for various electronic applications. These capacitors adhere to strict technical standards, ensuring reliable performance and safety.
Product Attributes
- Brand: GUANGDONG CHAMPION ELECTRONIC TECHNOLOGY CO., LTD.
- Origin: China
- Material: Metalized Polypropylene Film (Zinc-Aluminum Plating)
- Certifications: UL, ENEC, IEC, GB/T, KC, CQC
Technical Specifications
| Parameter | Specification | Details |
| Reference Standard | GB/T 6346.14 (IEC 60384-14) | |
| Standard Capacity | 0.001F ~ 4.7F | |
| Capacity Error Grade | 5% (J), 10% (K) | |
| Rated Voltage (AC) | 250V, 275V, 300V, 310V, 330V, 350V | |
| Climatic Category | 40/110/56 | |
| Operating Temperature Range | -40 ~ 110 | |
| Passive Flammability Class | B | |
| Voltage Proof (Between Terminals) | UN 4.3 DC, 60s | |
| Voltage Proof (Between Terminal and Case) | UN x 200% + 1500Vac, 60sec | |
| Dissipation Factor | 10 x 10 at 1kHz, (1Vrms Max. at 20) | |
| Insulation Resistance | CR 0.33F, IR 15000M; CR > 0.33F, IR x CR 5000s (100Vdc, 60sec / 20) |
| Test Item | Performance Requirement | Test Conditions |
| Withstand Voltage (between leads) | Shall be no abnormality | Rated voltage 4.3 DC test for 1 minute |
| Withstand Voltage (between lead and enclosure) | Shall be no abnormality | 200% rated voltage +1500VAC test for 1min |
| Range of Capacity | Within the tolerance specified | Voltage: 1Vrms Max, Frequency: 1KHz, Temperature: 20 |
| Dissipation Factor | 0.001 (0.1%) Max | Voltage: 1Vrms Max, Frequency: 1KHz, Temperature: 20 |
| Insulation Resistance | CR 0.33F, IR 15000M; CR > 0.33F, IR x CR 5000s | Voltage: 10015VDC, Time: 1min, Temperature: 20 |
| Lead Strength | No line break, no visible damage | Tensile: D0.8mm, 10N10%; D1.0mm, 20N10% (Duration: 101sec) |
| Lead Strength | No line break, no visible damage | Bending: D0.8mm, 5N10%; D1.0mm, 10N10% (Frequency: 2 times 90) |
| Resistance to Soldering Heat | 1. No visible damage 2. Capacity change rate 5% of initial capacity | No pre-drying, Soldering temperature: 2605, Soldering time: 50.5sec |
| Solderability | Soldering temperature: 2355, Soldering time: 20.5sec | |
| Rapid Change of Temperature | Lower limit: -40, Upper limit: 110, Cycles: 5 times, Duration: 30 min | |
| Climate Category (Test Db) | 1. No visible damage 2. Capacity change rate 5% 3. No permanent breakdown or arcing 4. Insulation resistance 50% of applicable value 5. DF 0.008 (10KHz, CN1F); 0.005 (1KHz,CN>1F) | Dry Heat: Upper limit: 110, Duration: 16Hrs; Damp heat, cyclic, First cycle; Cold: Lower limit: -40, Duration: 2Hrs; Damp heat, cyclic, Remaining cycle |
| Damp Heat, Steady State | 1. No visible damage 2. Capacity change rate 5% 3. No permanent breakdown or arcing 4. Insulation resistance 50% of applicable value 5. DF 0.008 (10KHz, CN1F); 0.005 (1KHz,CN>1F) | Temperature: 40C 2C, Relative humidity: 933%, Duration: 56 days |
| Durability | 125% rated voltage, hourly rise to 1000VAC 0.1 seconds, 110 1000 hours | |
| Charging and Discharging | Testing voltage: 2UN(DC), Number of replication: 10000 Times, Charge and discharge time: 1 sec/times | |
| Passive Flammability Test | Capacitor shall not continue to burn for more than 10 seconds, and drops shall not ignite cotton paper | Test duration for actual volume V (mm): 20 (250 |
| Nominal Capacity (F) | Dimensions (W*H*D mm) for 250VAC/275VAC/300VAC/310VAC/330VAC/350VAC |
| 0.001 | 10*9*4 |
| 0.0015 | 10*9*4 |
| 0.0022 | 10*9*4 |
| 0.0027 | 10*9*4 |
| 0.0033 | 10*9*4 |
| 0.0039 | 10*9*4 |
| 0.0047 | 10*9*4 |
| 0.0056 | 10*9*4 |
| 0.0068 | 10*9*4 |
| 0.0082 | 10*9*4 |
| 0.01 | 10*9*4 |
| 0.015 | 10*9*4 |
| 0.022 | 10*12*6 |
| 0.027 | 10*12*6 |
| 0.033 | 10*12*6 |
| 0.039 | 10*12*6 |
| 0.047 | 10*12*6 |
| 0.056 | 10*12*6 |
| 0.068 | 10*12*6 |
| 0.082 | 10*12*6 |
| 0.1 | 10*12*6 |
| 0.15 | 10*12*6 |
| 0.22 | 13*11*5 |
| 0.27 | 13*11*5 |
| 0.33 | 13*11*5 |
| 0.39 | 13*12*6 |
| 0.47 | 13*12*6 |
| 0.56 | 13*12*6 |
| 0.68 | 13*12*6 |
| 0.82 | 13*12*6 |
| 1 | 13*12*6 |
| 1.2 | 13*12*6 |
| 1.5 | 13*12*6 |
| 1.8 | 13*12*6 |
| 2 | 13*14*8 |
| 2.2 | 13*14*8 |
| 2.5 | 13*14*8 |
| 2.7 | 13*14*8 |
| 3 | 13*14*8 |
| 3.3 | 13*14*8 |
| 3.5 | 13*14*8 |
| 3.9 | 13*14*8 |
| 4 | 13*14*8 |
| 4.7 | 13*14*8 |
| 32 | 41*30*16 |
Storage Conditions and Duration
Packed capacitors should be stored in a clean, ventilated and dry warehouse, not close to the heat source, not by direct sunlight, it is strictly prohibited to store together with chemical reagents, acids and harmful gases. Temperature was between 5 and 35 and stored for one year at 75% relative humidity.
2505161700_CHAMPION-SMQP105K275XXF2B28150_C48887051.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
