<
>
Specifications
Capacitance:
100nF
Operating Temperature:
-40℃~+110℃
Ratings:
X2
Voltage(AC):
275V
safety certification:
UL;VDE;ENEC;CQC;KC
Tolerance:
±10%
Mfr. Part #:
SMQP104K275XXD2B15150
Package:
Through Hole,P=15mm
Key Attributes
Model Number:
SMQP104K275XXD2B15150
Product Description
Product Overview
The MPX-X2 series capacitors from GUANGDONG CHAMPION ELECTRONIC TECHNOLOGY CO., LTD. are designed for safety applications, adhering to stringent technical standards. They offer reliable performance with a wide operating temperature range and excellent insulation resistance. These capacitors are suitable for various electronic applications requiring high safety and reliability.
Product Attributes
- Brand: CHAMPION
- Origin: China
- Material: Polypropylene film with metallized zinc-aluminum coating
- Certifications: UL, ENEC, IEC, CQC, KC
Technical Specifications
| Parameter | Specification |
|---|---|
| Reference Standard | GB/T 6346.14 (IEC 60384-14) |
| Standard Capacity | 0.0014.7F |
| Capacity Error Grade | 5% (J), 10% (K) |
| Rated Voltage (AC) | 250V, 275V, 300V, 310V, 330V, 350V |
| Climatic Category | 40/110/56 |
| Operating Temperature Range | -40~110 |
| Passive Flammability Class | B |
| Voltage Proof (Between Terminals) | UN4.3 DC, 60s |
| Voltage Proof (Between Terminal and Case) | UN x 200+1500Vac, 60sec |
| Dissipation Factor | 10 x 10-4 at 1kHz, (1Vrms Max. at 20) |
| Insulation Resistance (CR 0.33F) | 15000M |
| Insulation Resistance (CR > 0.33F) | IR x CR 5000s (100Vdc, 60sec / 20) |
| Test Item | Performance Requirement | Test Conditions |
|---|---|---|
| Withstand Voltage (between leads) | Shall be no abnormality | Rated voltage 4.3 DC test for 1 minute |
| Withstand Voltage (between lead and enclosure) | Shall be no abnormality | 200% rated voltage +1500VAC test for 1min |
| Dissipation Factor | 0.001 (0.1%) Max | Voltage: 1Vrms Max, Frequency: 1KHz, Temperature: 20 |
| Insulation Resistance | CR 0.33F, IR 15000M; CR > 0.33F, IR x CR 5000s | Voltage: 10015VDC, Time: 1min, Temperature: 20 |
| Lead Strength | No line break, no visible damage | Tensile: D0.8mm, 10N10%; D1.0mm, 20N10% (101sec); Bending: D0.8mm, 5N10%; D1.0mm, 10N10% (490 twice) |
| Resistance to soldering heat | 1. No visible damage; 2. Capacity change rate 5% | No pre-drying, Soldering temp: 2605, Time: 50.5sec |
| Solderability | N/A | Soldering temp: 2355, Time: 20.5sec |
| Rapid change of temperature | 1. No visible damage; 2. Capacity change rate 5%; 3. No permanent breakdown or arcing; 4. Insulation resistance 50% of applicable value; 5. DF 0.008 (10KHz, CN1F); 0.005 (1KHz,CN>1F) | Lower limit temp: -40, Upper limit temp: 110, Cycles: 5 times, Duration: 30 min |
| Dry Heat | 1. No visible damage; 2. Capacity change rate 5%; 3. No permanent breakdown or arcing; 4. Insulation resistance 50% of applicable value; 5. DF 0.008 (10KHz, CN1F); 0.005 (1KHz,CN>1F) | Upper limit temp: 110, Duration: 16Hrs |
| Damp heat, cyclic, Test Db | 1. No visible damage; 2. Capacity change rate 5%; 3. No permanent breakdown or arcing; 4. Insulation resistance 50% of applicable value; 5. DF 0.008 (10KHz, CN1F); 0.005 (1KHz,CN>1F) | First cycle: Cold (-40, 2Hrs); Remaining cycle: Damp heat (40C 2C, 933% RH, 56 days) |
| Damp Heat, Steady State | 1. No visible damage; 2. Capacity change rate 5%; 3. No permanent breakdown or arcing; 4. Insulation resistance 50% of applicable value; 5. DF 0.008 (10KHz, CN1F); 0.005 (1KHz,CN>1F) | Temperature: 40C 2C, Relative humidity: 933%, Duration: 56 days |
| Durability | 125% rated voltage, hourly rise to 1000VAC 0.1 seconds, 110 1000 hours | 125% rated voltage, 110, 1000 hours |
| Charging and discharging | N/A | Testing voltage: 2UNDC, Number of replication: 10000 Times, Charge and discharge time: 1 sec/times |
| Passive flammability test | Capacitor shall not continue to burn for more than 10 seconds, and drops shall not ignite cotton paper | Test duration for actual volume V in mm3: 20s (250 |
| Nominal Capacity (F) | Dimensions (W*H*D mm) |
|---|---|
| 0.001 | 10*9*4 |
| 0.0015 | 10*9*4 |
| 0.0022 | 10*9*4 |
| 0.0027 | 10*9*4 |
| 0.0033 | 10*9*4 |
| 0.0039 | 10*9*4 |
| 0.0047 | 10*9*4 |
| 0.0056 | 10*12*6 |
| 0.0068 | 10*12*6 |
| 0.0082 | 10*12*6 |
| 0.01 | 10*12*6 |
| 0.015 | 10*12*6 |
| 0.022 | 10*12*6 |
| 0.027 | 10*12*6 |
| 0.033 | 10*12*6 |
| 0.039 | 10*12*6 |
| 0.047 | 10*12*6 |
| 0.056 | 13*11*5 |
| 0.068 | 13*11*5 |
| 0.082 | 13*12*6 |
| 0.1 | 13*12*6 |
| 0.15 | 13*12*6 |
| 0.22 | 13*12*6 |
| 0.27 | 13*12*6 |
| 0.33 | 13*12*6 |
| 0.39 | 13*14*8 |
| 0.47 | 13*14*8 |
| 0.56 | 18*12*6 |
| 0.68 | 18*13.5*7.5 |
| 0.82 | 13*14*8 |
| 1 | 18*13.5*7.5 |
| 1.2 | 18*14.5*8.4 |
| 1.5 | 13*14*8 |
| 1.8 | 18*14.5*8.4 |
| 2 | 18*15.5*9.5 |
| 2.2 | 13*14*8 |
| 2.5 | 18*15.5*9.5 |
| 2.7 | 18*19*10.8 |
| 3 | 13*16.5*9 |
| 3.3 | 18*15.5*9.5 |
| 3.5 | 26.5*19*10 |
| 3.9 | 18*15.5*9.5 |
| 4 | 26.5*19*10 |
| 4.7 | 18*19*10.8 |
| 32 | 31.5*21.6*13 |
| 41 | 32*25.5*16 |
Storage Conditions and Duration
Packed capacitors should be stored in a clean, ventilated and dry warehouse, not close to the heat source, not by direct sunlight, it is strictly prohibited to store together with chemical reagents, acids and harmful gases. Temperature was between 5and 35and stored for one year at 75% relative humidity.
2505161700_CHAMPION-SMQP104K275XXD2B15150_C48887058.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
