<
>
Specifications
Operating Temperature:
-55℃~+105℃
Lifetime:
2000hrs@105℃
Capacitance:
470uF
Height - Seated (Max):
10.5mm
Voltage Rating:
10V
Diameter:
8mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
HV471M010F105ETR
Package:
SMD,D8xL10.5mm
Key Attributes
Model Number:
HV471M010F105ETR
Product Description
Product Overview
The 59 SMD HV series capacitors are designed for high-density mounting and offer a long operational life of 2000 hours at 105. These capacitors are suitable for reflow soldering applications and comply with RoHS standards. They are ideal for various electronic applications requiring reliable performance under demanding conditions.
Product Attributes
- Series: 59 SMD HV
- RoHS Compliant
- Reflow soldering available
- Available for high density mounting
- For detail specifications, please refer to Engineering Bulletin No. E131
Technical Specifications
Item Performance Characteristics
| Characteristic | Specification |
|---|---|
| Operating Temperature Range | -55 to +105 |
| Rated Voltage Range | 6.3 to 50 VDC |
| Capacitance Range | 0.1 to 1500F |
| Capacitance Tolerance | 20% (120Hz, +20) |
| Leakage Current (max.) at +20 | I 0.01 CV or 3 A (whichever is greater), measured with rated working voltage applied after 2 minutes. |
| Dissipation Factor (tan) at 20, 120Hz | See table below |
| Low Temperature Characteristics (at 120Hz) | Impedance ratio max. Z-25Z+20 and Z-40Z+20 (See table below) |
Load Life Test Conditions
| Parameter | Condition |
|---|---|
| Duration time | 2000 Hrs |
| Ambient temperature | +105 |
| Applied voltage | Rated DC working voltage |
| After test requirement at +20 | Capacitance change: Within 30% of the initial value Dissipation factor: Not more than 300% of specified value Leakage current: Not more than the specified value |
Shelf Life Test Conditions
| Parameter | Condition |
|---|---|
| Duration time | 1000 Hrs |
| Ambient temperature | +105 |
| Applied voltage | None |
| After test requirement at +20 | Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. |
Resistance to Soldering Heat
| Parameter | Condition |
|---|---|
| Temperature | 250 |
| Duration | 30 seconds |
| Requirement | Meet characteristic requirements after cooling to room temperature. |
Dimensions (unit: mm)
| Rated voltage (VDC) | D | L | A | B | C | W | P |
|---|---|---|---|---|---|---|---|
| 6.3 | 4 | 5.5 | 4.3 | 4.3 | 4.9 | 0.5~0.8 | 1.0 |
| 10 | 5 | 5.5 | 5.3 | 5.3 | 5.9 | 0.5~0.8 | 1.4 |
| 16 | 6.3 | 5.5 | 6.6 | 6.6 | 7.2 | 0.5~0.8 | 2.2 |
| 25 | 6.3 | 7.7 | 6.6 | 6.6 | 7.2 | 0.5~0.8 | 2.2 |
| 35 | 8 | 6.5 | 8.3 | 8.3 | 9.0 | 0.5~0.8 | 2.3 |
| 50 | 8 | 10.5 | 8.3 | 8.3 | 9.0 | 0.7~1.1 | 3.1 |
Dissipation Factor (D.F.) (%) max
| CAP (F) \ Frequency (Hz) | 60(50) | 120 | 500 | 1K | 10K |
|---|---|---|---|---|---|
| 0.1CAP100F | 0.8 | 1.0 | 1.20 | 1.30 | 1.50 |
| 100CAP1500F | 0.8 | 1.0 | 1.10 | 1.15 | 1.20 |
Low Temperature Characteristics (Impedance ratio max)
| Rated voltage (VDC) | Z-25Z+20 | Z-40Z+20 |
|---|---|---|
| 6.3 | 6 | 12 |
| 10 | 4 | 10 |
| 16 | 4 | 8 |
| 25 | 3 | 6 |
| 35 | 2 | 4 |
| 50 | 2 | 4 |
Ripple Current (mA, rms) at 105
| WV (SV) | Cap (F) | 4x5.5 | 4x5.5 | 4x5.5 | 4x5.5 | 4x5.5 | 6.3x5.5 | 6.3x7.7 | 8x6.5 | 8x10.5 | 10x10.5 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6.3 | 0.1 | 1.0 | |||||||||
| 0.22 | 2.0 | ||||||||||
| 0.33 | 3.0 | ||||||||||
| 0.47 | 4.0 | ||||||||||
| 1 | 8.4 | ||||||||||
| 2.2 | 11 | ||||||||||
| 3.3 | 13 | ||||||||||
| 4.7 | 12 | 14 | |||||||||
| 10 | 20 | 22 | 23 | 28 | |||||||
| 10 | 22 | 25 | 31 | 34 | 37 | 40 | |||||
| 33 | 28 | 36 | 40 | 45 | 42 | ||||||
| 47 | 35 | 46 | 48 | 56 | 56 | 95 | |||||
| 16 | 68 | 40 | 55 | 60 | 62 | 90 | 140 | 185 | 190 | 280 | |
| 100 | 57 | 60 | 65 | 66 | 110 | 170 | 250 | 290 | 360 | ||
| 25 | 150 | 70 | 90 | 130 | 140 | 160 | 195 | 350 | 370 | 420 | |
| 220 | 90 | 110 | 140 | 160 | 180 | 210 | 450 | 480 | 530 | ||
| 35 | 330 | 130 | 160 | 170 | 180 | 190 | 310 | 480 | 500 | 520 | |
| 50 | 470 | ||||||||||
| 560 | |||||||||||
| 680 | |||||||||||
| 1000 | |||||||||||
| 1200 | |||||||||||
| 1500 |
Multiplier for Ripple Current vs. Frequency
| CAP(F)Frequency(Hz) | 60(50) | 120 | 500 | 1K | 10K |
|---|---|---|---|---|---|
| 0.1CAP100F | 0.8 | 1.0 | 1.20 | 1.30 | 1.50 |
| 100CAP1500F | 0.8 | 1.0 | 1.10 | 1.15 | 1.20 |
2410010403_CapXon-HV471M010F105ETR_C59948.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
