<
>
Specifications
Operating Temperature:
-55℃~+105℃
Lifetime:
2000hrs@105℃
Capacitance:
330uF
Height - Seated (Max):
10.5mm
Voltage Rating:
25V
Diameter:
8mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
HV331M025F105ETR
Package:
SMD,D8xL10.5mm
Key Attributes
Model Number:
HV331M025F105ETR
Product Description
Product Overview
The 59 SMD HV series capacitors are designed for high-density mounting and offer a long operational life of 2000 hours at 105. These capacitors are RoHS Compliant and suitable for reflow soldering. For detailed specifications, please refer to Engineering Bulletin No. E131.
Product Attributes
- Series: 59 SMD HV
- Compliance: RoHS Compliant
- Soldering: Reflow soldering available
- Mounting: Available for high density mounting
Technical Specifications
Performance Characteristics
| Characteristic | Value |
|---|---|
| Operating Temperature Range | -55 to +105 |
| Rated Voltage Range | 6.3 to 50 VDC |
| Capacitance Range | 0.1 to 1500F |
| Capacitance Tolerance | 20% (120Hz, +20) |
| Leakage Current (max.) | I 0.01 CV or 3 A (whichever is greater, after 2 minutes at rated working voltage) |
| Dissipation Factor (tan) | (at 20, 120Hz) - See table below |
| Low Temperature Characteristics | Impedance ratio max (at 120Hz) - See table below |
Load Life Test Conditions
| Parameter | Value |
|---|---|
| Duration time | 2000 Hrs |
| Ambient temperature | +105 |
| Applied voltage | Rated DC working voltage |
| After test requirement at +20 (Capacitance change) | Within 30% of the initial value |
| After test requirement at +20 (Dissipation factor) | Not more than 300% of specified value |
| After test requirement at +20 (Leakage current) | Not more than the specified value |
| Pre-treatment for measurements | Application of DC working voltage for 30 minutes |
Shelf Life Test Conditions
| Parameter | Value |
|---|---|
| Duration time | 1000 Hrs |
| Ambient temperature | +105 |
| Applied voltage | None |
| After test requirement at +20 | Same limits as Load life |
| Pre-treatment for measurements | Application of DC working voltage for 30 minutes |
Resistance to Soldering Heat
| Condition | Requirement |
|---|---|
| Hot plate temperature | 250 for 30 seconds |
| Post-test requirement | Meet characteristic requirements after cooling to room temperature |
Dimensions (unit: mm)
| Rated voltage(VDC) | D | L | A | B | C | W | P |
|---|---|---|---|---|---|---|---|
| 6.3 | 4 | 5.5 | 4.3 | 4.3 | 4.9 | 0.5~0.8 | 1.0 |
| 10 | 5 | 5.5 | 5.3 | 5.3 | 5.9 | 0.5~0.8 | 1.4 |
| 16 | 6.3 | 5.5 | 6.6 | 6.6 | 7.2 | 0.5~0.8 | 2.2 |
| 25 | 6.3 | 7.7 | 6.6 | 6.6 | 7.2 | 0.5~0.8 | 2.2 |
| 35 | 8 | 6.5 | 8.3 | 8.3 | 9.0 | 0.5~0.8 | 2.3 |
| 50 | 8 | 10.5 | 8.3 | 8.3 | 9.0 | 0.7~1.1 | 3.1 |
Dissipation Factor (D.F.) (%) max
| CAP(F) | Frequency(Hz) | 60(50) | 120 | 500 | 1K | 10K |
|---|---|---|---|---|---|---|
| 0.1CAP100F | 4~6.3 | 30 | 24 | 20 | 16 | 14 |
| 8~10 | 35 | 26 | 24 | 18 | 14 | |
| 100CAP1500F | 4~6.3 | 30 | 24 | 20 | 16 | 14 |
| 8~10 | 35 | 26 | 24 | 18 | 14 |
Low Temperature Characteristics (Z-25Z+20, Z-40Z+20)
| Rated voltage(VDC) | Z-25Z+20 | Z-40Z+20 |
|---|---|---|
| 6.3 | 6 | 12 |
| 10 | 4 | 10 |
| 16 | 4 | 8 |
| 25 | 3 | 6 |
| 35 | 2 | 4 |
| 50 | 2 | 4 |
Ripple Current (mA, rms) at 105
| WV (SV) | Cap(F) | 4X5.5 | 5X5.5 | 6.3X5.5 | 6.3X7.7 | 8X6.5 | 8X10.5 | 10X10.5 |
|---|---|---|---|---|---|---|---|---|
| 6.3 | 0.1 | 1.0 | - | - | - | - | - | - |
| 0.22 | 2.0 | - | - | - | - | - | - | |
| 0.33 | 3.0 | - | - | - | - | - | - | |
| 0.47 | 4.0 | - | - | - | - | - | - | |
| 1 | 8.4 | - | - | - | - | - | - | |
| 2.2 | 11 | - | - | - | - | - | - | |
| 3.3 | 13 | - | - | - | - | - | - | |
| 4.7 | 12 | 14 | - | - | - | - | - | |
| 10 | 20 | 22 | 28 | - | - | - | - | |
| 22 | 23 | 25 | 31 | - | - | - | - | |
| 10 | 0.1 | 1.0 | - | - | - | - | - | - |
| 0.22 | 2.0 | - | - | - | - | - | - | |
| 0.33 | 3.0 | - | - | - | - | - | - | |
| 0.47 | 4.0 | - | - | - | - | - | - | |
| 1 | 8.4 | - | - | - | - | - | - | |
| 2.2 | 11 | - | - | - | - | - | - | |
| 3.3 | 13 | - | - | - | - | - | - | |
| 4.7 | 12 | 14 | - | - | - | - | - | |
| 10 | 20 | 22 | 28 | - | - | - | - | |
| 22 | 23 | 25 | 31 | - | - | - | - | |
| 16 | 0.1 | 1.0 | - | - | - | - | - | - |
| 0.22 | 2.0 | - | - | - | - | - | - | |
| 0.33 | 3.0 | - | - | - | - | - | - | |
| 0.47 | 4.0 | - | - | - | - | - | - | |
| 1 | 8.4 | - | - | - | - | - | - | |
| 2.2 | 11 | - | - | - | - | - | - | |
| 3.3 | 13 | - | - | - | - | - | - | |
| 4.7 | 12 | 14 | - | - | - | - | - | |
| 10 | 20 | 22 | 28 | - | - | - | - | |
| 22 | 23 | 25 | 31 | - | - | - | - | |
| 25 | 0.1 | 1.0 | - | - | - | - | - | - |
| 0.22 | 2.0 | - | - | - | - | - | - | |
| 0.33 | 3.0 | - | - | - | - | - | - | |
| 0.47 | 4.0 | - | - | - | - | - | - | |
| 1 | 8.4 | - | - | - | - | - | - | |
| 2.2 | 11 | - | - | - | - | - | - | |
| 3.3 | 13 | - | - | - | - | - | - | |
| 4.7 | 12 | 14 | - | - | - | - | - | |
| 10 | 20 | 22 | 28 | - | - | - | - | |
| 22 | 23 | 25 | 31 | - | - | - | - | |
| 35 | 0.1 | 1.0 | - | - | - | - | - | - |
| 0.22 | 2.0 | - | - | - | - | - | - | |
| 0.33 | 3.0 | - | - | - | - | - | - | |
| 0.47 | 4.0 | - | - | - | - | - | - | |
| 1 | 8.4 | - | - | - | - | - | - | |
| 2.2 | 11 | - | - | - | - | - | - | |
| 3.3 | 13 | - | - | - | - | - | - | |
| 4.7 | 12 | 14 | - | - | - | - | - | |
| 10 | 20 | 22 | 28 | - | - | - | - | |
| 22 | 23 | 25 | 31 | - | - | - | - | |
| 50 | 0.1 | 1.0 | - | - | - | - | - | - |
| 0.22 | 2.0 | - | - | - | - | - | - | |
| 0.33 | 3.0 | - | - | - | - | - | - | |
| 0.47 | 4.0 | - | - | - | - | - | - | |
| 1 | 8.4 | - | - | - | - | - | - | |
| 2.2 | 11 | - | - | - | - | - | - | |
| 3.3 | 13 | - | - | - | - | - | - | |
| 4.7 | 12 | 14 | - | - | - | - | - | |
| 10 | 20 | 22 | 28 | - | - | - | - | |
| 22 | 23 | 25 | 31 | - | - | - | - |
Multiplier for Ripple Current vs. Frequency
| CAP(F) | Frequency(Hz) | Multiplier |
|---|---|---|
| 0.1CAP100F | 60(50) | 0.8 |
| 120 | 1.0 | |
| 500 | 1.20 | |
| 1K | 1.30 | |
| 10K | 1.50 | |
| 100CAP1500F | 60(50) | 0.8 |
| 120 | 1.0 | |
| 500 | 1.10 | |
| 1K | 1.15 | |
| 10K | 1.20 |
1912111437_CapXon-HV331M025F105ETR_C402577.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
