Online Service

Online Service

Contact Person
+86 136 6733 2386
quality snap in electrolytic capacitors CapXon HP101M450M310A ideal for switching power supplies and PCB plug factory
<
quality snap in electrolytic capacitors CapXon HP101M450M310A ideal for switching power supplies and PCB plug factory
>
Specifications
Operating Temperature:
-40℃~+105℃
Lifetime:
2000hrs@105℃
Capacitance:
100uF
Height - Seated (Max):
31mm
Pin Spacing:
-
Voltage Rating:
450V
Diameter:
22mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
HP101M450M310A
Package:
Through Hole,D22xL31mm
Key Attributes
Model Number: HP101M450M310A
Product Description

HP Series Snap-in Capacitors

Product Overview
The HP Series Snap-in Capacitors are highly reliable electrolytic capacitors designed for demanding applications. Featuring a high ripple current capability and a fixed terminal spacing of 10 mm for easy printed circuit board plug-in, these capacitors are ideal for switching power supplies. They are constructed with an aluminum case and an explosion-proof vent for enhanced safety and durability. The series is RoHS Compliant.

Product Attributes

  • Brand: HP Series
  • Type: Snap-in Capacitors
  • Certifications: RoHS Compliant

Technical Specifications

Performance Characteristics

Item Specification
Operating Temperature Range -40 to +105 / -25 to +105
Rated Voltage Range 10 to 100 VDC / 160 to 450 VDC
Capacitance Range 330 to 68000F / 33 to 2200F
Capacitance Tolerance 20% (120Hz, +20)
Leakage Current (at +20, max.) I 0.02CV (After 5 minutes with rated working voltage applied)
Dissipation Factor (tan, at 20, 120Hz) Less than the value under table (%)
Low Temperature Characteristics (at 120Hz) Impedance ratio max. Z - 25Z+20: 5 (10-100VDC), 8 (160-450VDC)
Impedance ratio max. Z - 40Z+20: 15 (10-35VDC), 12 (50-100VDC), 12 (160-250VDC), 18 (400-450VDC)
Load Life Test Duration: 2000 Hrs
Ambient Temperature: +105
Applied Voltage: Rated DC working voltage
After test requirement at +20:
Capacitance change: 20% of initial value
Dissipation factor: 200% of initial specified value
Leakage current: Initial specified value
Shelf Life Test Duration: 1000 Hrs
Ambient Temperature: +105
Applied Voltage: None
After test requirement at +20: Same limits as Load life.
Pre-treatment for measurements: DC working voltage applied for 30 minutes.

Dimensions and Ripple Current

For detailed specifications, please refer to Engineering Bulletin No. E107.

Note: The following tables detail case sizes (DxL in mm) and corresponding ripple current (A, rms) at 105 and 120Hz for various capacitance and voltage ratings.

Ripple Current Multiplier vs. Frequency

CAP (F) \ Frequency (Hz) 50(60) 120 400 1K 10K 50K-100K
10CAP100 0.8 1 1.23 1.36 1.48 1.53
100CAP1000 0.8 1 1.16 1.25 1.35 1.38
1000CAP 0.8 1 1.11 1.17 1.25 1.28

Case Size and Ripple Current Data (Sample)

(Note: Full data is extensive and presented in tabular format in the original document. Below is a representative excerpt.)

WV(SV) D (F) Size (mm) Ripple (A, rms)
10 (13) 3300 22x26 1.17
4700 22x26 1.24
25 (32) 1500 22x26 1.26
2200 22x26 1.03
50 (63) 680 22x26 0.70
1000 22x26 0.84
160 (200) 100 22x26 0.38
150 22x26 0.37
220 (270) 68 22x26 0.27
100 22x31 0.44
400 (450) 33 22x26 0.39
47 22x26 0.56
450 (500) 33 22x26 0.24
47 22x31 0.35

2304140030_CapXon-HP101M450M310A_C402620.pdf
Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max