<
>
Specifications
Operating Temperature:
-40℃~+85℃
Lifetime:
2000hrs@85℃
Capacitance:
330uF
Height - Seated (Max):
10.5mm
Voltage Rating:
35V
Diameter:
10mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
LV331M035G105ETR
Package:
SMD,D10xL10.5mm
Key Attributes
Model Number:
LV331M035G105ETR
Product Description
Product Overview
The 57 SMD LV Series capacitors are designed for standard 85 operation and are available in case diameters ranging from 4mm to 10mm. These capacitors are suitable for reflow soldering and high-density mounting applications. They offer a wide capacitance range from 0.1F to 1500F and are RoHS Compliant.
Product Attributes
- Standard Operating Temperature: 85
- Soldering Method: Reflow soldering available
- Mounting: Suitable for high density mounting
- Compliance: RoHS Compliant
- Reference: For detailed specifications, refer to Engineering Bulletin No. E130
Technical Specifications
| Performance Characteristics | Value | |
|---|---|---|
| Operating Temperature Range | -40~ +85 | |
| Rated Voltage Range | 4~50 VDC | |
| Capacitance Range | 0.1 to 1500F | |
| Capacitance Tolerance | 20%(120Hz,+20) | |
| Leakage Current (+20,max.) | Formula | I0.01 CV or 3 (A) |
| Condition | After 2 minutes, whichever is greater measured with rated working voltage applied | |
| Dissipation Factor (tan, at 20, 120Hz) | See table below | |
| Low Temperature Characteristics (at 120Hz) | See table below (Impedance ratio max) | |
Load Life Test Conditions
| Duration time | 2000 Hrs |
| Ambient temperature | +85 |
| Applied voltage | Rated DC working voltage |
| After test requirement at +20: | |
| Capacitance change | Within 25% of the initial value |
| Dissipation factor | Not more than 200% of specified value |
| Leakage current | Not more than the specified value |
Shelf Life Test Conditions
| Duration time | 1000 Hrs |
| Ambient temperature | +85 |
| Applied voltage | None |
| After test requirement at +20: | |
| Same limits as Load life. | |
| Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. | |
Resistance to soldering heat
| Condition | Capacitors shall be kept on the hot plate maintained at 250 for 30 seconds. After removing from the hot plate and restored at room temperature, they meet the characteristic requirements listed under. |
| Leakage current | Less than specified value |
| Capacitance change | Within 10% of initial value |
| tan | Less than specified value |
Dissipation Factor (D.F. %)
| Rated voltage(VDC) | D.F.() | |
|---|---|---|
| 4~6.3 max | 8~10 | |
| 4 | 42 | 45 |
| 6.3 | 30 | 34 |
| 10 | 22 | 26 |
| 16 | 18 | - |
| 20 | 16 | 16 |
| 25 | 16 | 16 |
| 35 | 14 | 14 |
| 50 | 14 | 14 |
Low Temperature Characteristics (Impedance ratio Z-25Z+20 and Z-40Z+20)
| Rated voltage(VDC) | Impedance ratio max | |
|---|---|---|
| Z-25Z+20 | Z-40Z+20 | |
| 4 | 7 | 15 |
| 6.3 | 4 | 8 |
| 10 | 3 | 8 |
| 16 | 2 | 4 |
| 25 | 2 | 4 |
| 35 | 2 | 3 |
| 50 | 2 | 3 |
Ripple Current (mA, rms) at 85, 120Hz
| CAP(F) | Frequency(Hz) | ||||
|---|---|---|---|---|---|
| 60(50) | 120 | 500 | 1K | 10K | |
| 0.1CAP100F | 0.8 | 1.0 | 1.20 | 1.30 | 1.50 |
| 100CAP1500F | 0.8 | 1.0 | 1.10 | 1.15 | 1.20 |
Dimensions and Ripple Current Values
| Case Size DxL(mm) | WV (SV) | Cap(F) | Ripple (mA, rms) | ||||
|---|---|---|---|---|---|---|---|
| 4 | 6.3 | 10 | 16 | 25 | 35 | 50 | |
| 4X5.5 | 0.1 (1.0) | 0.22 (2.0) | 0.33 (2.8) | 0.47 (4.0) | 1 (8.4) | 2.2 (14) | 3.3 (17) |
| 4X5.5 | 4.7 (18) | - | - | - | - | - | - |
| 4X5.5 | 10 (21) | - | - | - | - | - | - |
| 4X5.5 | 22 (29) | - | - | - | - | - | - |
| 4X5.5 | 33 (33) | - | - | - | - | - | - |
| 4X5.5 | 47 (28) | - | - | - | - | - | - |
| 4X5.5 | 100 (34) | - | - | - | - | - | - |
| 4X5.5 | 220 (61) | - | - | - | - | - | - |
| 4X5.5 | 330 (135) | - | - | - | - | - | - |
| 4X5.5 | 470 (220) | - | - | - | - | - | - |
| 4X5.5 | 680 (285) | - | - | - | - | - | - |
| 4X5.5 | 1000 (370) | - | - | - | - | - | - |
| 4X5.5 | 1200 (410) | - | - | - | - | - | - |
| 4X5.5 | 1500 (470) | - | - | - | - | - | - |
| 6.3X5.5 | - | 35 (29) | 40 (29) | 45 (40) | 50 (46) | 60 (61) | 76 (141) |
| 6.3X5.5 | - | 58 (33) | 60 (37) | 65 (45) | 70 (52) | 76 (60) | 170 (197) |
| 6.3X5.5 | - | 100 (100) | - | - | - | - | - |
| 6.3X5.5 | - | 150 (145) | - | - | - | - | - |
| 6.3X5.5 | - | 190 (210) | - | - | - | - | - |
| 6.3X7.7 | - | 75 (35) | 188 (135) | 225 (170) | 250 (185) | 300 (300) | 400 (450) |
| 6.3X7.7 | - | 170 (135) | - | - | - | - | - |
| 6.3X7.7 | - | 197 (197) | - | - | - | - | - |
| 6.3X7.7 | - | 210 (220) | - | - | - | - | - |
| 6.3X7.7 | - | 242 (242) | - | - | - | - | - |
| 6.3X7.7 | - | 285 (285) | - | - | - | - | - |
| 6.3X7.7 | - | 370 (370) | - | - | - | - | - |
| 6.3X7.7 | - | 410 (410) | - | - | - | - | - |
| 8X6.5 | - | 80 (33) | 200 (47) | 240 (100) | 300 (150) | 330 (150) | 450 (280) |
| 8X6.5 | - | 115 (54) | - | - | - | - | - |
| 8X6.5 | - | 160 (150) | - | - | - | - | - |
| 8X6.5 | - | 220 (220) | - | - | - | - | - |
| 8X6.5 | - | 242 (242) | - | - | - | - | - |
| 8X6.5 | - | 285 (285) | - | - | - | - | - |
| 8X6.5 | - | 370 (370) | - | - | - | - | - |
| 8X6.5 | - | 410 (410) | - | - | - | - | - |
| 8X10.5 | - | 300 (400) | 450 (450) | 480 (460) | 500 (500) | 510 (510) | 530 (530) |
| 8X10.5 | - | 290 (290) | - | - | - | - | - |
| 8X10.5 | - | 330 (330) | - | - | - | - | - |
| 8X10.5 | - | 380 (420) | - | - | - | - | - |
| 8X10.5 | - | 410 (410) | - | - | - | - | - |
| 8X10.5 | - | 460 (460) | - | - | - | - | - |
| 8X10.5 | - | 500 (500) | - | - | - | - | - |
| 8X10.5 | - | 510 (510) | - | - | - | - | - |
| 10X10.5 | - | 450 (450) | 460 (460) | 480 (480) | 500 (500) | 510 (510) | 530 (530) |
Dimensions (unit: mm)
| Case Diameter D | Case Length L | D | L | A | B | C | W |
|---|---|---|---|---|---|---|---|
| 4 | 5.5 | 4.3 | 4.3 | 4.9 | 0.5~0.8 | - | - |
| 5 | 5.5 | 5.3 | 5.3 | 5.9 | 0.5~0.8 | - | - |
| 6.3 | 5.5 | 6.6 | 6.6 | 7.2 | 0.5~0.8 | - | - |
| 6.3 | 7.7 | 6.6 | 6.6 | 7.2 | 0.5~0.8 | - | - |
| 8 | 6.5 | 8.3 | 8.3 | 9.0 | 0.7~1.1 | - | - |
| 8 | 10.5 | 8.3 | 8.3 | 9.0 | 0.7~1.1 | - | - |
| 10 | 10.5 | 10.3 | 10.3 | 11.0 | 0.7~1.1 | - | - |
2409301703_CapXon-LV331M035G105ETR_C61260.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
