Product Overview
The 59 SMD HV series capacitors are designed for high-density mounting and offer long life performance, with 2000 hours at 105. These capacitors are compliant with RoHS standards and are suitable for reflow soldering applications. For detailed specifications, please refer to Engineering Bulletin No. E131.Product Attributes
- Series: 59 SMD HV
- Compliance: RoHS Compliant
- Soldering: Reflow soldering available
- Mounting: Available for high density mounting
Technical Specifications
Item Performance Characteristics
| Characteristic | Specification |
|---|---|
| Operating Temperature Range | -55 to +105 |
| Rated Voltage Range | 6.3 to 50 VDC |
| Capacitance Range | 0.1 to 1500F |
| Capacitance Tolerance | 20% (120Hz, +20) |
| Leakage Current (max.) at +20 | I 0.01 CV or 3 A, whichever is greater (after 2 minutes, with rated working voltage applied) |
| Dissipation Factor (tan) at 20, 120Hz | See table below |
| Low Temperature Characteristics (at 120Hz) | See table below (Impedance ratio max) |
Load Life Test Conditions
Duration: 2000 Hrs
Ambient Temperature: +105
Applied Voltage: Rated DC working voltage
After test requirement at +20:
Capacitance change: Within 30% of the initial value
Dissipation factor: Not more than 300% of specified value
Leakage current: Not more than the specified value
Shelf Life Test Conditions
Duration: 1000 Hrs
Ambient Temperature: +105
Applied Voltage: None
After test requirement at +20: Same limits as Load life.
Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes.
Resistance to Soldering Heat
Capacitors shall be kept on a hot plate maintained at 250 for 30 seconds. After removing from the hot plate and restoring to room temperature, they meet the characteristic requirements.
HV Series Specifications - Dissipation Factor (D.F.%) and Impedance Ratio
| Rated voltage(VDC) | Impedance ratio max | D.F.(%)max | ||
|---|---|---|---|---|
| Z-25Z+20 | Z-40Z+20 | 4~6.3 | 8~10 | |
| 6.3 | 6 | 12 | 30 | 35 |
| 10 | 4 | 10 | 24 | 26 |
| 16 | 4 | 8 | 20 | 24 |
| 25 | 3 | 6 | 16 | 18 |
| 35 | 2 | 4 | 14 | 14 |
| 50 | 2 | 4 | 14 | 14 |
HV Series - Multiplier for Ripple Current vs. Frequency
| CAP(F)Frequency(Hz) | 60(50) | 120 | 500 | 1K | 10K |
|---|---|---|---|---|---|
| 0.1CAP100F | 0.8 | 1.0 | 1.20 | 1.30 | 1.50 |
| 100CAP1500F | 0.8 | 1.0 | 1.10 | 1.15 | 1.20 |
HV Series Case Size DxL(mm) and Ripple Current (mA, rms) at 105
| WV (SV) | Cap(F) | 6.3 | 10 | 16 | 25 | 35 | 50 | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Ripple | Size | Ripple | Size | Ripple | Size | Ripple | Size | Ripple | Size | Ripple | ||
| 0.1 | 4X5.5 | 1.0 | |||||||||||
| 0.22 | 4X5.5 | 2.0 | |||||||||||
| 0.33 | 4X5.5 | 3.0 | |||||||||||
| 0.47 | 4X5.5 | 4.0 | |||||||||||
| 1 | 4X5.5 | 8.4 | 4X5.5 | 10 | 4X5.5 | 20 | |||||||
| 2.2 | 4X5.5 | 11 | 4X5.5 | 13 | 4X5.5 | 22 | |||||||
| 3.3 | 4X5.5 | 13 | 4X5.5 | 14 | 4X5.5 | 24 | |||||||
| 4.7 | 4X5.5 | 12 | 4X5.5 | 14 | 4X5.5 | 18 | 4X5.5 | 20 | |||||
| 10 | 4X5.5 | 20 | 4X5.5 | 22 | 4X5.5 | 24 | 6.3X5.5 | 28 | |||||
| 22 | 4X5.5 | 23 | 4X5.5 | 25 | 4X5.5 | 31 | 5X5.5 | 38 | 6.3X7.7 | 50 | |||
| 33 | 4X5.5 | 28 | 4X5.5 | 34 | 5X5.5 | 36 | 6.3X5.5 | 48 | 6.3X7.7 | 95 | |||
| 47 | 4X5.5 | 37 | 5X5.5 | 40 | 5X5.5 | 45 | 6.3X7.7 | 56 | 6.3X7.7 | 115 | 8X10.5 | 135 | |
| 100 | 5X5.5 | 46 | 6.3X5.5 | 55 | 6.3X7.7 | 58 | 6.3X7.7 | 110 | 6.3X7.7 | 130 | 10X10.5 | 315 | |
| 150 | 6.3X5.5 | 70 | 6.3X5.5 | 90 | 6.3X7.7 | 125 | 8X10.5 | 175 | 8X10.5 | 190 | 10X10.5 | 330 | |
| 220 | 6.3X7.7 | 90 | 6.3X7.7 | 140 | 6.3X7.7 | 170 | 8X10.5 | 180 | 8X10.5 | 250 | 10X10.5 | 350 | |
| 330 | 6.3X7.7 | 140 | 8X10.5 | 195 | 8X10.5 | 250 | 8X10.5 | 290 | 10X10.5 | 360 | |||
| 470 | 8X10.5 | 170 | 8X10.5 | 195 | 8X10.5 | 250 | 8X10.5 | 290 | 10X10.5 | 360 | |||
| 560 | 8X10.5 | 310 | 10X10.5 | 450 | 10X10.5 | 480 | |||||||
| 680 | 10X10.5 | 370 | 10X10.5 | 480 | 10X10.5 | 540 | |||||||
| 1000 | 10X10.5 | 480 | 10X10.5 | 530 | |||||||||
| 1200 | 10X10.5 | 500 | |||||||||||
| 1500 | 10X10.5 | 520 | |||||||||||
Dimensions (unit: mm)
| D | L | A | B | C | W | P |
|---|---|---|---|---|---|---|
| 4 | 5.5 | 4.3 | 4.3 | 4.9 | 0.5~0.8 | 1.0 |
| 5 | 5.5 | 5.3 | 5.3 | 5.9 | 0.5~0.8 | 1.4 |
| 6.3 | 5.5 | 6.6 | 6.6 | 7.2 | 0.5~0.8 | 2.2 |
| 6.3 | 7.7 | 6.6 | 6.6 | 7.2 | 0.5~0.8 | 2.2 |
| 8 | 6.5 | 8.3 | 8.3 | 9.0 | 0.5~0.8 | 2.3 |
| 8 | 10.5 | 8.3 | 8.3 | 9.0 | 0.7~1.1 | 3.1 |
| 10 | 10.5 | 10.3 | 10.3 | 11.0 | 0.7~1.1 | 4.5 |
2410010403_CapXon-HV220M025E055ETR_C77726.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
