Online Service

Online Service

Contact Person
+86 136 6733 2386
quality SMD Capacitor CapXon ZV220M025E055ETR Series RoHS Compliant Low Impedance for High Density Mounting factory
<
quality SMD Capacitor CapXon ZV220M025E055ETR Series RoHS Compliant Low Impedance for High Density Mounting factory
>
Specifications
Operating Temperature:
-55℃~+105℃
Lifetime:
2000hrs@105℃
Capacitance:
22uF
Height - Seated (Max):
5.5mm
Voltage Rating:
25V
Diameter:
6.3mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
ZV220M025E055ETR
Package:
SMD,D6.3xL5.5mm
Key Attributes
Model Number: ZV220M025E055ETR
Product Description

Product Overview

The ZV Series is a range of SMD (Surface Mount Device) capacitors designed for high-density mounting applications. These capacitors offer low impedance at 100 KHz and are suitable for reflow soldering. With a load life of 2000 hours at 105, they are a reliable choice for demanding environments. For detailed specifications, please refer to Engineering Bulletin No. E135. This series is RoHS Compliant.

Product Attributes

  • Series: ZV Series
  • Mounting Type: SMD (Surface Mount Device)
  • Compliance: RoHS Compliant

Technical Specifications

Performance Characteristic Specification
Operating Temperature Range -55 ~ +105
Rated Voltage Range 6.3 ~ 50 VDC
Capacitance Range 1 to 1500 F
Capacitance Tolerance 20% (120Hz, +20)
Leakage Current (at 20, max.) 0.01CV or 3 A (whichever is greater)
Dissipation Factor (tan, at 20, 120Hz) See table below
Low Temperature Characteristics (at 120Hz) Impedance ratio Z(-25)/Z(+20): 2 (max) for 6.3V, 3 (max) for 8V and above.
Impedance ratio Z(-55)/Z(+20): 4 (max) for 6.3V, 6 (max) for 8V, 4 (max) for 10V-25V, 3 (max) for 35V, 3 (max) for 50V.
Load Life Test Conditions Duration: 2000 Hrs
Ambient Temperature: +105
Applied Voltage: Rated DC working voltage
After test requirements at +105:
Capacitance change: 25% of initial value
Dissipation factor: 200% of initial specified value
Leakage current: Initial specified value
Shelf Life Test Conditions Duration: 1000 Hrs
Ambient Temperature: +105
Applied Voltage: None
After test requirements at +20: Same limits as Load life.
Pre-treatment for measurements: DC working voltage applied for 30 minutes.
Resistance to Soldering Heat Capacitors kept on hot plate at 250 for 30 seconds.
After test requirements at room temperature:
Leakage current: Less than specified value
Capacitance change: Within 10% of initial value
tan: Less than specified value

ZV Series Case Size, Ripple Current, and Impedance

WV (VDC) Cap (F) 6.3 (8) 10 (13) 16 (20) 25 (32) 35 (44) 50 (63)
Size (DxL mm) Ripple (mA) Impedance () Size (DxL mm) Ripple (mA) Impedance () Size (DxL mm) Ripple (mA) Impedance () Size (DxL mm) Ripple (mA) Impedance () Size (DxL mm) Ripple (mA) Impedance () Size (DxL mm) Ripple (mA) Impedance ()
1.0 4X5.5 53 5 4X5.5 53 5 2.2 4X5.5 53 5 4X5.5 53 5 3.3 4X5.5 53 5 4X5.5 53 5
6.8 4X5.5 58 4.5 4X5.5 65 4.0 5X5.5 65 4 5X5.5 85 2.8
10 4X5.5 65 5 4X5.5 74 3.7 4X5.5 90 3.5 5X5.5 90 3.5 5X5.5 98 2.5 5X5.5 80 2.6 6.3X5.5 100 2.5
15 4X5.5 70 4.6 5X5.5 100 2.2 5X5.5 120 1.8 6.3X5.5 130 1.8 6.3X5.5 115 1.8 6.3X5.5 140 1.5
22 4X5.5 53 3.5 4X5.5 80 2.6 4X5.5 83 3.0 5X5.5 128 1.7 5X5.5 140 1.4 6.3X5.5 140 1.5 5X5.5 110 2.6
27 4X5.5 65 3.2 5X5.5 85 2.4 5X5.5 135 1.9 6.3X5.5 145 1.4 6.3X5.5 165 1.2 6.3X7.7 160 1.35
33 4X5.5 80 2.8 4X5.5 85 2.3 5X5.5 160 2.2 5X5.5 145 1.4 6.3X5.5 185 1.2 6.3X7.7 170 0.8 6.3X7.7 210 0.9
47 4X5.5 82 2.4 5X5.5 130 2.0 5X5.5 170 2.0 6.3X5.5 180 1.2 6.3X5.5 200 1.0 6.3X7.7 200 0.79 6.3X7.7 195 0.8
56 5X5.5 94 1.70 6.3X5.5 180 1.45 6.3X5.5 195 1.3 6.3X5.5 195 1.15 6.3X7.7 230 0.73 8X10.5 260 0.68
68 5X5.5 100 1.6 6.3X5.5 195 1.4 6.3X5.5 205 1.2 6.3X5.5 200 1.1 6.3X7.7 240 0.7 8X10.5 300 0.6
100 5X5.5 110 1.5 6.3X5.5 210 1.3 6.3X5.5 210 1.1 6.3X7.7 220 0.75 6.3X7.7 270 0.67 8X10.5 310 0.55
150 6.3X5.5 170 0.95 6.3X5.5 220 1.0 6.3X7.7 225 0.8 8X10.5 420 0.5 8X10.5 430 0.45 10X10.5 540 0.28
220 6.3X5.5 195 0.6 6.3X7.7 245 0.6 6.3X7.7 250 0.75 8X10.5 480 0.3 8X10.5 450 0.25 10X10.5 570 0.26
330 6.3X7.7 230 0.51 8X10.5 400 0.36 8X10.5 470 0.34 8X10.5 510 0.26 10X10.5 570 0.23
470 8X10.5 380 0.45 8X10.5 470 0.32 8X10.5 520 0.3 10X10.5 570 0.18
680 8X10.5 420 0.42 10X10.5 620 0.29 10X10.5 600 0.26
1000 8X10.5 470 0.28 10X10.5 670 0.25 10X10.5 500 0.25
1200 10X10.5 530 0.20
1500 10X10.5 570 0.17

ZV Series Dimensions (unit: mm)

CAP (F) Frequency (Hz) 60 (50) 120 400 1K 10K 50K-100K
10 0.47 0.59 0.76 0.85 0.97 1.0
10CAP100 0.52 0.65 0.80 0.89 0.97 1.0

ZV Series Dimensions (unit: mm)

D L A B C W P
4 4.3 5.5 4.3 4.3 4.9 0.5~0.8 1.0
5 5.3 5.5 5.3 5.3 5.9 0.5~0.8 1.4
6.3 6.6 5.5 6.6 6.6 7.2 0.5~0.8 2.2
6.3 6.6 7.7 6.6 6.6 7.2 0.5~0.8 2.2
8 8.3 6.5 8.3 8.3 9.0 0.5~0.8 2.3
8 8.3 10.5 8.3 8.3 9.0 0.7~1.1 3.1
10 10.3 10.5 10.3 10.3 11.0 0.7~1.1 4.5

ZV Series Multiplier for Ripple Current vs. Frequency

Item Frequency (Hz) Multiplier
Ripple Current 100 KHz 1.0
50K-100K 1.0
10K 0.97
1K 0.85
400 0.76
120 0.59
60(50) 0.47

ZV Series Dissipation Factor (tan) (%) max. at 20, 120Hz

Working voltage (VDC) D.F. (%)
6.3 26
10 19
16 16
25 16
35 14
50 12

ZV Series Max Impedance () at 20, 100 KHz

Working voltage (VDC) Cap (F) 6.3 (8) 10 (13) 16 (20) 25 (32) 35 (44) 50 (63)
1.0 5 5 5 5 5 5
6.8 4.5 4.0 4 2.8
10 5 3.7 3.5 3.5 2.5 2.6
15 4.6 2.2 1.8 1.8 1.8 1.5
22 3.5 2.6 3.0 1.7 1.4 1.5
27 3.2 2.4 1.9 1.4 1.2 1.35
33 2.8 2.3 2.2 1.4 0.8 0.9
47 2.4 2.0 2.0 1.2 0.79 0.8
56 1.70 1.45 1.3 1.15 0.73 0.68
68 1.6 1.4 1.2 1.1 0.7 0.6
100 1.5 1.3 1.1 0.75 0.67 0.55
150 0.95 1.0 0.8 0.5 0.45 0.28
220 0.6 0.6 0.75 0.3 0.25 0.26
330 0.51 0.36 0.34 0.26 0.23
470 0.45 0.32 0.3 0.18
680 0.42 0.29 0.26
1000 0.28 0.25 0.25
1200 0.20
1500 0.17

1809291612_CapXon-ZV220M025E055ETR_C84688.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max