<
>
Specifications
Operating Temperature:
-55℃~+105℃
Lifetime:
2000hrs@105℃
Capacitance:
47uF
Voltage Rating:
50V
Tolerance:
±20%
Ripple Current:
230mA@100kHz
Mfr. Part #:
DV470M050E077ETR
Package:
SMD,D6.3xL7.7mm
Key Attributes
Model Number:
DV470M050E077ETR
Product Description
Product Overview
The CAPXON DV Series Aluminum Electrolytic Capacitors are designed for general-purpose applications. These capacitors offer reliable performance across a wide operating temperature range of -55C to +105C. They are suitable for various electronic applications where stable capacitance and low leakage current are required. The DV series adheres to RoHS environmental standards.
Product Attributes
- Brand: CAPXON
- Series: DV Series
- Type: Aluminum Electrolytic Capacitors
- Origin: DONG GUAN CAPXON TRADING CO.,LTD / CAPXON ELECTRONIC (SHEN ZHEN) CO., LTD
- Environmental Compliance: RoHS
Technical Specifications
| CAPXON P/N | Capacitance (F) | Capacitance Tolerance (%) | Rated W.V (VDC) | Surge Volt (VDC) | Max. D.F. (%) | Ripple Current (mA) @ 100KHz, 105 | Max. I.M. () @ 100KHz | Max. L.C. (A) | Oper. Temp. () | Case Size D* L (mm) | Customer P/N |
|---|---|---|---|---|---|---|---|---|---|---|---|
| DV470M050E077ETR | 47 | 20 | 50 | 58 | 17 | 230 | 0.7 | 23.5 | -55~+105 | 6.3X7.7 | DV470M050E077ETR |
Dimensions (Unit: mm)
| D | L | A | B | C | W | P 0.2 |
|---|---|---|---|---|---|---|
| 6.3 | 7.7 | 6.6 | 6.6 | 7.2 | 0.5~0.8 | 2.2 |
Part Number System
Capacitance (F) Code:
| Capacitance (F) | Code |
|---|---|
| 0.1 | 0R1 |
| 0.47 | R47 |
| 1 | 010 |
| 4.7 | 4R7 |
| 10 | 100 |
| 100 | 101 |
| 1000 | 102 |
| 10000 | 103 |
Capacitance Tolerance Code:
| Tolerance (%) | Code |
|---|---|
| 5 | H |
| 10 | K |
| 20 | M |
| 30 | N |
| -10 to +30 | Q |
| -10 to +50 | T |
| -10 to +20 | V |
| -10 to +100 | W |
| 0 to +20 | Z |
| -30 to +0 | U |
| 15 | S |
| 0 to +30 | Y |
| 0 to +40 | X |
| 0 to +50 | A |
| -5 to +20 | J |
| -8 to +5 | E |
| +5 to +20 | I |
| 0 to -20 | B |
| -15 to +20 | P |
| -25 to +20 | L |
| -50 to +0 | O |
| -5 to +30 | C |
Voltage (W.V) Code:
| Voltage (W.V) | Code |
|---|---|
| 6.3 | 6R3 |
| 10 | 010 |
| 16 | 016 |
| 25 | 025 |
| 35 | 035 |
| 50 | 050 |
| 63 | 063 |
| 80 | 080 |
| 100 | 100 |
| 160 | 160 |
| 200 | 200 |
| 220 | 220 |
| 250 | 250 |
| 350 | 350 |
| 400 | 400 |
| 420 | 420 |
| 450 | 450 |
| 500 | 500 |
Case Diameter (D: mm) Code:
| Diameter | Code |
|---|---|
| 3 | A |
| 4 | B |
| 5 | C |
| 6.3 | E |
| 7.3 | 7 |
| 8 | F |
| 10 | G |
| 12 | H |
| 13 | I |
| 16 | J |
| 18 | K |
| 20 | L |
| 22 | M |
| 25 | N |
| 30 | O |
| 35 | P |
| 40 | Q |
| 42 | U |
| 45 | V |
| 51 | R |
| 63.5 | S |
| 76.2 | T |
| 89 | X |
| 14.5 | Y |
| 12.5 | Z |
Height (L: mm) Code:
| Description | Code |
|---|---|
| 5 | 050 |
| 5.5 | 055 |
| 7 | 070 |
| 7.7 | 077 |
| 8 | 080 |
| 11 | 110 |
| 11.5 | 115 |
| 12 | 120 |
| 12.5 | 125 |
| 14 | 140 |
| 16 | 160 |
| 20 | 200 |
| 21 | 210 |
| 25 | 250 |
| 25.5 | 255 |
| 31.5 | 315 |
| 35 | 350 |
| 35.5 | 355 |
| 41 | 410 |
| 47 | 470 |
| 52 | 520 |
| 83 | 830 |
| 98 | 980 |
| 118 | A18 |
| 141 | A41 |
| 151 | A51 |
Product Type Code:
| Description | Code |
|---|---|
| Taping (Ammo Package) | TA, TB, TC, TD, TE, TF, etc. |
| Taping (Reel Package) | RA, RB, RC, RD, RE, etc. |
| Lead Cutting | CA |
| Lead Forming | CF |
| Cutting Lead Forming | FA |
| Lead Crimping & Forming | KF |
| Lead Cutting & Kink | CK |
| Kink Bending & Cutting | KA |
| Forming & Kink | CR, CL |
| Without Lead Treatment | E |
| With Lead Treatment | A |
Lead Treatment Code:
| Description | Code |
|---|---|
| Taping (Ammo Package) | TATB TCTD TETF ETC. |
| Taping (Reel Package) | RARB RCRD RE Etc. |
| Lead Cutting | CA |
| Lead Forming | CF |
| Cutting Lead Forming | FA |
| Lead Crimping & Forming | KF |
| Lead Cutting & Kink | CK |
| Kink Bending & Cutting | KA |
| Forming & Kink | CRCL |
| Without Lead Treatment | E |
| With Lead Treatment | A |
Remarks
- Leakage Current Test: I0.01CV or 3 (uA), after 2 minutes, whichever is greater, measured with rated working voltage applied.
- Operating Temperature: -55C to +105C
- Capacitance and Dissipation Factor Test: At +20C, 120Hz
- Load Life Test: At +105C for 2000 Hrs.
- Shelf Life Test: At +105C for 1000 Hrs.
- Capacitors are suitable for the specified electric model; contact manufacturer for other applications.
Performance Data
| Test Item | Conditions | Criteria |
|---|---|---|
| Leakage Current (L.C.) | Rated voltage applied in series with 100010 resistor. Measured after capacitors reached rated voltage. | I0.01CV or 3(), after 2 minutes, whichever is greater. |
| Capacitance (Cap.) | Measuring frequency: 120Hz20%. Measuring voltage: 0.5Vrms max. +1.5 to 2.0VDC. Measuring circuit: Series equivalent circuit. | Shall be within the specified capacitance tolerance. |
| Dissipation Factor (tan) | Measuring frequency: 120Hz20%. Measuring voltage: 0.5Vrms max. +1.5 to 2.0VDC. Measuring circuit: Series equivalent circuit. | See table in source document for values based on voltage. |
| Terminal Strength (Pull) | Capacitor body held, force applied to lead wire. | Lead wire shall neither loosen nor break away. |
| Terminal Strength (Bending) | Capacitor body inclined through 90 and returned. Consecutive bends in opposite direction. | Lead wire shall neither loosen nor break away. |
| Soldering Heat Resistance Test | Reflow in specified conditions. | Capacitance change: Within 10%. Tan : Not more than specified. Leakage current: Not more than specified. Swelling of case: Less than 0.2mm (for <6.3) or 0.3mm (for 8). Appearance: No abnormality. |
| Solderability Test | Solder: Sn-3Ag-0.5Cu. Flux: Ethanol solution (25 wt.% rosin). Solder temperature: 2455. Dipping time: 20.5 seconds. | At least 95% of circumferential surface of the dipped portion of terminal shall be covered with new solder. |
| Temperature Cycles | Refer to JIS-C-5101-1 (2010) No:1-10. | Capacitance change: Within 5%. Tan : Not more than specified. Leakage current: Not more than specified. Appearance: No leakage and damaged. |
| Vibration | Frequency range: 2 to 3000Hz. Amplitude or Acceleration: 0.75 mm or 98m/s (whichever is less severe). | Capacitance change: Within 5%. Tan : Not more than specified. Leakage current: Not more than specified. Appearance: No leakage and damaged. |
| Damp Heat Steady State Test | Test temperature: +402. Relative humidity: 90 to 95%RH. Test time: 250 hours (Endurance time 2000H) or 500 hours (Endurance time2000H). | Capacitance change: Within 20% (2000H) or 10% (>2000H). Tan : Not more than 120% of specified. Leakage current: Not more than specified. Appearance: No leakage and damaged. |
| Endurance | Rated D.C voltage applied. Ambient temperature: 1052. Specified test time: 2000 hours. | Capacitance change: Within 30%. Tan : Not more than 300% of specified. Leakage current: Not more than specified. Appearance: No leakage and damaged. |
| Surge Voltage Test | Series protective resistor: 100010. Test cycle: 1000 cycles. Surge voltage: 1.15x rated voltage (315V) or 1.1x rated voltage (>315V). | Capacitance change: Within 15%. Tan : Not more than specified. Leakage current: Not more than specified. Appearance: No leakage and damaged. |
| Pressure Relief Vent | Apply reverse voltage with 1 amp DC current. | No sparking; No shorting. No breaking out of electrolyte paper; Vent opening, no flowing down of electrolyte. |
| High Temperature Storage | 1000 hours at 1052 without applied voltage. | Capacitance change: Within 30%. Tan : Not more than 300% of specified. Leakage current: Not more than specified. Appearance: No leakage and damaged. |
| High and Low Temperature Characteristics | Temperature cycles from -55C to +105C. | Impedance ratio and capacitance change within specified limits. |
Marking
- Rated voltage
- Nominal capacitance (uF)
- Polarity (-) indication (Cathode)
- Production date code (e.g., D08: D=DV Series, 0=Year 2010, 8=Month)
Packing
- Capacitors on tape are reeled with cathode side adjacent to sprocket hole.
- Cover tape width and coverage of sprocket holes specified.
- Cover tape peel back force: 20 to 100 grams.
Temperature Profile (Reflow)
- Pre-heating: Less than +160 lasting 120 seconds.
- Capacitor top temperature shall not exceed +260.
- Duration over +230 at capacitor top shall not exceed 30 seconds.
2201121800_CapXon-DV470M050E077ETR_C2937295.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
