<
>
Specifications
Lifetime:
1000hrs@105℃
Capacitance:
10uF
Height - Seated (Max):
7mm
Voltage Rating:
25V
Pin Spacing:
1.5mm
Diameter:
4mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
28mA@120Hz
Mfr. Part #:
SJ100M025B070A
Package:
Through Hole,D4xL7mm
Key Attributes
Model Number:
SJ100M025B070A
Product Description
CapXon SJ Series Aluminum Electrolytic Capacitors
Product Overview
The CapXon SJ series aluminum electrolytic capacitors are designed for general-purpose applications, adhering to JIS-C-5101-1(2010) standards. These capacitors offer reliable performance with features such as safety vents for overpressure protection (for capacitors 6.3X11mm, 8X7mm) and environmental compliance with RoHS regulations. They are suitable for various industrial applications and can withstand harsh transportation conditions, including wide temperature ranges and high altitudes.
Product Attributes
- Brand: CapXon
- Series: SJ
- Origin: Taiwan
- Compliance: RoHS
- Design Standard: JIS-C-5101-1(2010), EIAJ RCR-2367
Technical Specifications
| Specification | Details |
|---|---|
| Approval Number | SFAK2-1511000007 |
| Series Part Number System Format | (1). Series (2). Capacitance (3). Capacitance Tolerance (4). Voltage (W.V) (5). Case (Diameter D: mm) (6). Height (L: mm) (7). Product type (8). Lead Treatment (9). Special requirement |
| Capacitance (uF) Codes | 0R1 (0.1), R47 (0.47), 010 (1), 4R7 (4.7), 100 (10), 101 (100), 102 (1000), 103 (10000) |
| Capacitance Tolerance Codes | H (5%), K (10%), M (20%), N (-10to+30%), Q (-10to+50%), T (-10to+20%), V (-10to+100%), W (0to+20%), Z (-30to+0%), U (15%), S (0to+30%), Y (0to+40%), X (0to+50%), A (-5to+20%), J (-8to+5%), E (+5to+20%), I (0to-20%), B (-15to+20%), P (-25to+20%), L (-50to+0%), O (-5to+30%), C (0to+30%) |
| Rated Voltage (W.V) Codes | 6R3 (6.3), 010 (10), 016 (16), 025 (25), 035 (35), 050 (50), 063 (63), 080 (80), 100 (100), 160 (160), 200 (200), 220 (220), 250 (250), 350 (350), 400 (400), 420 (420), 450 (450), 500 (500) |
| Case Diameter (D: mm) Codes | A (3), B (4), C (5), E (6.3), 7 (7.3), F (8), G (10), H (12), I (13), J (16), K (18), L (20), M (22), N (25), O (30), P (35), Q (40), U (42), V (45), R (51), S (63.5), T (76.2), X (89), Y (14.5), Z (12.5) |
| Height (L: mm) Codes | 050 (5), 055 (5.5), 070 (7), 077 (7.7), 080 (8), 110 (11), 115 (11.5), 120 (12), 125 (12.5), 140 (14), 160 (16), 200 (20), 210 (21), 250 (25), 255 (25.5), 315 (31.5), 350 (35), 355 (35.5), 410 (41), 470 (47), 520 (52), 830 (83), 980 (98), A18 (118), A41 (141), A51 (151) |
| Lead Treatment Codes | TA, TB, TC, TD, TE, TF (Taping Ammo Package); RA, RB, RC, RD, RE (Taping Reel Package); CA (Lead Cutting); CF (Lead Forming); FA (Cutting Lead Forming only); KF (Lead Crimping & Forming); CK (Lead Cutting & Kink); KA (Kink Bending & Cutting); CR, CL (Forming & Kink); EF (Lead Forming & Kink) |
| Product Type Codes | A (Without Lead Treatment), E (With Lead Treatment) |
| Special Requirement Codes | A (Terminals of Snap-in), H (Height requirement), R (Ripple current), B (Rubber), I (L.C. countermeasure), S (Sleeve), C (Lead wire), K (Vent line), T (Temperature characteristic), D (D.F.), L (Life), V (Vt, Electrolyte paper), E (Electrolyte), N (Nude), M (Solder, technics, form, Case with pillar), S (Solder, technics, form, Case with pillar), F (Pitch), P (Sleeve, tray, print, PVC sleeve), Y (clip loop), G (Fill glue), Q (Capacitance, CV, Break), Z (Impedance & ESR) |
| Maximum Ripple Current (at +105C, 120Hz) | Refer to datasheet for specific values. Multipliers provided for frequency and temperature variations. |
| Leakage Current Criteria | I 0.01CV or 3 (A), whichever is greater, after 1 minute. |
| Capacitance Criteria | Within specified tolerance (120Hz 20%). |
| Dissipation Factor (tan) Criteria | Refer to table for specific values based on W.V. |
| Terminal Strength (Pull Force) | LUG type: 2.5N to 20N (10%) based on terminal diameter. SNAP-IN type: 5N to 40N (10%) based on terminal diameter. |
| Terminal Strength (Lead Bending) | LUG type: 2 bends, 10N load. SNAP-IN type: No bending experiments. |
| Soldering Heat Resistance Criteria | No significant damage, legible marking, no electrolyte leakage. Capacitance change within 5%, Tan and Leakage current within specified values. |
| Solderability Test Criteria | At least 95% of the circumferential surface of the dipped portion of the terminal shall be covered with new solder. |
| Temperature Cycles Criteria | Capacitance change within 5%, Tan and Leakage current within specified values. No leakage and damage. |
| Vibration Criteria | Capacitance change within 5%, Tan and Leakage current within specified values. No leakage and damage. |
| Damp Heat Steady State Test Criteria | Capacitance change within 20%, Tan not more than 120% of specified, Leakage current not more than specified. No leakage and damage. |
| Endurance Test Criteria | Capacitance change within 20% (4V: 30%), Tan not more than 200% of specified, Leakage current not more than specified. No leakage and damage. |
| Surge Voltage Test Criteria | Capacitance change within 15%, Tan and Leakage current within specified values. No leakage and damage. |
| High Temperature Storage Criteria | Capacitance change within 20%, Tan not more than 200% of specified, Leakage current not more than specified. No leakage and damage. |
| High and Low Temperature Characteristics Criteria | Impedance ratio shall not exceed specified values. Capacitance change within 30%, Tan not more than specified, Leakage current not more than 800% of initial specified value. |
| Marking | CapXon (Manufacturer), Rated voltage, Nominal capacitance, Polarity (), Maximum operating temperature (105), Series (SJ), Production date code, VENT (for 6.3X11mm, 8X7mm). |
| Dimensions (Example) | D: 4, 5, 6.3, 8 mm; L: 5 to 151 mm. Refer to diagram for specific dimensions. |
2409291234_CapXon-SJ100M025B070A_C62932.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
