<
>
Specifications
Operating Temperature:
-55℃~+105℃
Lifetime:
2000hrs@105℃
Capacitance:
470uF
Height - Seated (Max):
10.5mm
Voltage Rating:
16V
Diameter:
8mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
DV471M016F105ETR
Package:
SMD,D8xL10.5mm
Key Attributes
Model Number:
DV471M016F105ETR
Product Description
Product Overview
The DV Series chip-type capacitors are designed for high-density PC boards and automatic mounting machines. They feature low impedance and a load life of 2000 hours at +105. These capacitors are compliant with the RoHS directive and are suitable for applications requiring reliable performance under demanding conditions.
Product Attributes
- Chip type
- Low impedance
- Load life: 2000 hours at +105
- Designed for surface mounting on high density PC board
- Applicable to automatic mounting machine using carrier tape
- Complied to the RoHS directive
Technical Specifications
| Item | Performance Characteristics |
|---|---|
| Operating Temperature Range | -55~ +105 |
| Rated Voltage Range | 6.3~50 VDC |
| Capacitance Range | 1 to 1500F |
| Capacitance Tolerance | 20%(120Hz,+20) |
| Leakage Current (max.) | I0.01 CV or 3 (A) After 2 minutes whichever is greater measured with rated working voltage applied. |
| Dissipation Factor (tanat 20120Hz) | See table below |
| Low Temperature Characteristics (at 120Hz) | Impedance ratio Z-25Z+20 and Z-55Z+20 |
Load Life Test conditions
- Duration time: 2000 Hrs
- Ambient temperature: +105
- Applied voltage: Rated DC working voltage
- After test requirement at +20: Capacitance change: Within 30% of initial value; Dissipation factor: Less than 300% of specified value; Leakage current: Less than specified value
Shelf Life Test conditions
- Duration time: 1000 Hrs
- Ambient temperature: +105
- Applied voltage: None
- After test requirement at +20: Same limits as Load life.
- Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes.
Resistance to soldering heat
Capacitors restored to 20 after exposing at 250 for 30 seconds shall satisfy:
- Leakage current: Less than specified value
- Capacitance change: Within 10% of initial value
- tan: Less than specified value
| Working voltage(VDC) | Z-25Z+20 | Z-55Z+20 |
|---|---|---|
| 6.3 | 2 | 8 |
| 10 | 2 | 6 |
| 16 | 2 | 4 |
| 25 | 2 | 4 |
| 35 | 2 | 3 |
| 50 | 2 | 3 |
| Working voltage(VDC) | D.F. (%) max. |
|---|---|
| 6.3 | 24 |
| 10 | 19 |
| 16 | 16 |
| 25 | 14 |
| 35 | 14 |
| 50 | 12 |
| CAP(F) | Frequency(Hz) | 60(50) | 120 | 400 | 1K | 10K | 50K-100K |
|---|---|---|---|---|---|---|---|
| CAP10 | 0.47 | 0.59 | 0.76 | 0.85 | 0.97 | 1.0 | |
| 0.52 | 0.65 | 0.80 | 0.89 | 0.97 | 1.0 | ||
| 10CAP100 | 0.47 | 0.59 | 0.76 | 0.85 | 0.97 | 1.0 | |
| 0.52 | 0.65 | 0.80 | 0.89 | 0.97 | 1.0 |
| D | 4 | 5 | 6.3 | 6.3 | 8 | 8 | 10 |
|---|---|---|---|---|---|---|---|
| L | 5.5 | 5.5 | 5.5 | 7.7 | 6.5 | 10.5 | 10.5 |
| A | 4.3 | 5.3 | 6.6 | 6.6 | 8.3 | 8.3 | 10.3 |
| B | 4.3 | 5.3 | 6.6 | 6.6 | 8.3 | 8.3 | 10.3 |
| C | 4.9 | 5.9 | 7.2 | 7.2 | 9.0 | 9.0 | 11.0 |
| W | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 | 0.7~1.1 | 0.7~1.1 |
| P | 1.0 | 1.4 | 2.2 | 2.2 | 2.3 | 3.1 | 4.5 |
| Dimensions (unit:mm) | |||||||
| WV (SV) | Cap (F) | Size | Ripple Current (mA, rms ) at 105 100KHz | Impedance () at 20 100 KHz | Size | Ripple Current (mA, rms ) at 105 100KHz | Impedance () at 20 100 KHz | Size | Ripple Current (mA, rms ) at 105 100KHz | Impedance () at 20 100 KHz | Size | Ripple Current (mA, rms ) at 105 100KHz | Impedance () at 20 100 KHz | Size | Ripple Current (mA, rms ) at 105 100KHz | Impedance () at 20 100 KHz | Size | Ripple Current (mA, rms ) at 105 100KHz | Impedance () at 20 100 KHz | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6.3 | 1.0 | 4X5.5 | 55 | 4.5 | 4X5.5 | 55 | 4.5 | 4X5.5 | 80 | 2.8 | 4X5.5 | 55 | 4.5 | 4X5.5 | 85 | 2.3 | 4X5.5 | 55 | 4.5 | ||||||
| 4.7 | 4X5.5 | 85 | 2.3 | 4X5.5 | 55 | 4.5 | 4X5.5 | 85 | 2.3 | 4X5.5 | 55 | 4.5 | 4X5.5 | 85 | 2.3 | 4X5.5 | 55 | 4.5 | |||||||
| 6.8 | 4X5.5 | 70 | 2.8 | 4X5.5 | 88 | 2.2 | 5X5.5 | 75 | 3.8 | 4X5.5 | 80 | 2.2 | 4X5.5 | 85 | 2.1 | 4X5.5 | 90 | 2.0 | |||||||
| 10 | 4X5.5 | 80 | 2.2 | 4X5.5 | 85 | 2.1 | 4X5.5 | 90 | 2.0 | 5X5.5 | 95 | 2.8 | 5X5.5 | 125 | 1.4 | 6.3X5.5 | 130 | 2.2 | |||||||
| 10 | 15 | 4X5.5 | 85 | 2.0 | 5X5.5 | 125 | 1.9 | 5X5.5 | 140 | 1.2 | 6.3X5.5 | 140 | 1.6 | ||||||||||||
| 22 | 4X5.5 | 75 | 2.2 | 4X5.5 | 80 | 2.2 | 4X5.5 | 90 | 1.98 | 5X5.5 | 145 | 1.2 | 5X5.5 | 155 | 1.1 | 6.3X5.5 | 150 | 1.3 | |||||||
| 27 | 4X5.5 | 79 | 1.98 | 5X5.5 | 125 | 1.9 | 5X5.5 | 170 | 0.74 | 6.3X5.5 | 200 | 0.62 | 6.3X5.5 | 210 | 0.6 | 6.3X7.7 | 180 | 1.2 | |||||||
| 33 | 4X5.5 | 82 | 1.9 | 4X5.5 | 90 | 1.85 | 6.3X5.5 | 185 | 0.6 | 5X5.5 | 160 | 1.05 | 6.3X5.5 | 230 | 0.54 | 6.3X7.7 | 190 | 0.71 | |||||||
| 47 | 4X5.5 | 86 | 1.88 | 5X5.5 | 165 | 1.1 | 5X5.5 | 195 | 1.05 | 6.3X5.5 | 220 | 0.56 | 6.3X5.5 | 240 | 0.53 | 6.3X7.7 | 230 | 0.7 | |||||||
| 56 | 5X5.5 | 150 | 1.10 | 6.3X5.5 | 210 | 0.57 | 6.3X5.5 | 220 | 0.56 | 6.3X5.5 | 230 | 0.54 | 6.3X7.7 | 250 | 0.49 | 8X10.5 | 300 | 0.52 | |||||||
| 68 | 5X5.5 | 160 | 0.9 | 6.3X5.5 | 220 | 0.55 | 6.3X5.5 | 230 | 0.54 | 6.3X5.5 | 240 | 0.48 | 6.3X7.7 | 265 | 0.4 | 8X10.5 | 320 | 0.5 | |||||||
| 100 | 5X5.5 | 170 | 0.8 | 6.3X5.5 | 240 | 0.53 | 6.3X5.5 | 255 | 0.52 | 6.3X7.7 | 290 | 0.38 | 6.3X7.7 | 300 | 0.38 | 8X10.5 | 350 | 0.46 | |||||||
| 150 | 6.3X5.5 | 235 | 0.51 | 6.3X5.5 | 250 | 0.49 | 6.3X7.7 | 265 | 0.45 | 8X10.5 | 480 | 0.25 | 8X10.5 | 510 | 0.24 | 10X10.5 | 600 | 0.25 | |||||||
| 220 | 6.3X5.5 | 240 | 0.48 | 6.3X7.7 | 270 | 0.44 | 6.3X7.7 | 275 | 0.43 | 8X10.5 | 530 | 0.22 | 8X10.5 | 570 | 0.21 | 10X10.5 | 650 | 0.23 | |||||||
| 330 | 6.3X7.7 | 275 | 0.36 | 8X10.5 | 500 | 0.25 | 8X10.5 | 550 | 0.25 | 8X10.5 | 570 | 0.2 | 10X10.5 | 650 | 0.15 | ||||||||||
| 470 | 8X10.5 | 450 | 0.28 | 8X10.5 | 550 | 0.25 | 8X10.5 | 590 | 0.22 | 10X10.5 | 650 | 0.15 | |||||||||||||
| 680 | 8X10.5 | 500 | 0.25 | 10X10.5 | 680 | 0.2 | 10X10.5 | 720 | 0.16 | ||||||||||||||||
| 1000 | 8X10.5 | 530 | 0.20 | 10X10.5 | 740 | 0.15 | 10X10.5 | 570 | 0.17 | ||||||||||||||||
| 1200 | 10X10.5 | 600 | 0.16 | ||||||||||||||||||||||
| 1500 | 10X10.5 | 650 | 0.13 | ||||||||||||||||||||||
| Case Size DxL(mm) | 6.3 (8) | 10 (13) | 16 (20) | 25 (32) | 35 (44) | 50 (63) |
|---|---|---|---|---|---|---|
| Multiplier for Ripple Current vs. Frequency |
2004271808_CapXon-DV471M016F105ETR_C65223.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
