<
>
Specifications
Operating Temperature:
-40℃~+105℃
Lifetime:
3000hrs@105℃
Capacitance:
470uF
Height - Seated (Max):
16mm
Pin Spacing:
3.5mm
Voltage Rating:
35V
Diameter:
8mm
Equivalent Series Resistance(ESR):
48mΩ@100kHz
Tolerance:
±20%
Ripple Current:
1.48A@100kHz
Mfr. Part #:
GF471M035F160A
Package:
Through Hole,D8xL16mm
Key Attributes
Model Number:
GF471M035F160A
Product Description
Product Overview
This document details the specifications and characteristics of CapXon Aluminum Electrolytic Capacitors, specifically the GF series. These capacitors are designed for general-purpose applications and are manufactured by CapXon Electronic (Shenzhen) Co., Ltd. They offer a wide operating temperature range and adhere to stringent quality standards, including JIS-C-5101-1. The product features a PET sleeve for marking and a safety vent for overpressure protection. Key applications are not explicitly detailed but implied through technical specifications and general capacitor usage.
Product Attributes
- Brand: CapXon
- Manufacturer: CapXon Electronic (Shenzhen) Co., Ltd.
- Origin: China
- Series: GF
- Sleeve Material: PET
- Certifications/Standards: JIS-C-5101-1, JIS-C-5101-4, JIS-C-5101-18, Montreal Protocol, RoHS
- Environmental Policy: Free of ozone-depleting chemicals (ODC); complies with environmental and RoHS regulations.
Technical Specifications
| Part Number | Capacitance (F) | Capacitance Tolerance (%) | Rated Working Voltage (VDC) | Surge Voltage (VDC) | Max. Dissipation Factor (D.F.) (%) | Ripple Current (mA) @ 100kHz /105 | Max. Leakage Current (A) | Max. Impedance () @ 100kHz /20 | Operating Temperature (C) | Case Size (D* L) (mm) | Endurance @105 (Hrs) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| GF471M035F160A | 470 | -20~20 | 35 | 40 | 9 | 1480 | 164.5 | 0.048 | -40~105 | 8X16 | 3000 |
Key Technical Data and Performance
| Specification | Test Conditions | Criterion/Value |
|---|---|---|
| Capacitance Tolerance | 202, 120Hz, 0.5Vrms | -20~20% |
| Dissipation Factor (tan) | 202, 120Hz, 0.5Vrms | See Table 1 |
| Leakage Current (LC) | Rated DC voltage applied for 2 min with 100010% resistor | 164.5 (A) |
| Temperature Characteristic (Impedance Ratio) | Measured at thermal equilibrium and same frequency | Z(-25)/Z(+20) 3 (for 35V) |
| High Temperature Load | 105, Rated DC working voltage, 3000 H | Capacitance Change: 20% DF: 200% of spec LC: spec value Appearance: No visible damage |
| High Temperature Storage | 105, No voltage, 1000 H | Capacitance Change: 20% DF: 200% of spec LC: spec value Appearance: No visible damage |
| Surge Test | 15~35, 40V, 1000 cycles (30s charge, 330s discharge) | Capacitance Change: 15% DF: spec value LC: spec value Appearance: No visible damage |
| Vibration Test | 10~55Hz, 0.75mm amplitude, 98 m/s (10g) for 6 Hrs (X,Y,Z) | Capacitance Change: 5% DF: spec value LC: spec value Appearance: No visible damage |
| Solderability | Sn:96.5%, Ag:3%, Cu:0.5% solder, 2455, 2.00.5S immersion | New solder adhesion > 95% |
| Resistance to Soldering Heat | Sn:96.5%, Ag:3%, Cu:0.5% solder, 2603, 101S immersion | Capacitance Change: 5% DF: spec value LC: spec value |
| Temperature Cycling | 10 cycles (refer to JIS-C-5101-1 No:4.16) | Capacitance Change: 5% DF: spec value LC: spec value Appearance: No visible damage |
| Steady State Damp Heat | 402, 90~95% RH, 500H | Capacitance Change: 10% DF: 1.2 times spec value LC: spec value Appearance: No visible damage |
Characteristic Tables
Table 1: Dissipation Factor (D.F.) (%) max.
| Working Voltage (VDC) | 6 | 10 | 16 | 25 | 35 | 50 | 63 | 100 |
|---|---|---|---|---|---|---|---|---|
| D.F. (%)max. | 16 | 14 | 12 | 10 | 9 | 8 | 8 | 8 |
| For capacitance >1000uF, add 2% per another 1000uF | ||||||||
Table 2: Impedance Ratio max
| Working Voltage | 6 | 10 | 16 | 25 | 35 | 50 | 63 | 100 |
|---|---|---|---|---|---|---|---|---|
| Z(-25)Z(+20) | 4 | 3 | 3 | 3 | 3 | 3 | 2 | 2 |
| Z(-40)Z(+20) | 8 | 6 | 4 | 3 | 3 | 3 | 3 | 3 |
Table 3: Multiplier for Ripple Current vs. Frequency
| CAP(uF)Frequency(Hz) | 50(60) | 120 | 400 | 1K | 10K | 50K~100K |
|---|---|---|---|---|---|---|
| CAP10 | 0.47 | 0.59 | 0.76 | 0.85 | 0.97 | 1.0 |
| 10CAP100 | 0.52 | 0.62 | 0.80 | 0.89 | 0.97 | 1.0 |
| 100CAP1000 | 0.58 | 0.72 | 0.84 | 0.90 | 0.98 | 1.0 |
| 1000CAP | 0.63 | 0.78 | 0.87 | 0.91 | 0.98 | 1.0 |
Marking Description
Example:
- Front: CapXon, 470uF, 35V, (-) Polarity Indicator, 105 Max Operating Temp., GF Series, VENT Safety Vent
- Back: P1502 Date Code (P:PET, 15:Year 2015, 02:Week 2)
Marking Components:
- (1) CapXon: Brand
- (2) 35V: Rated Voltage
- (3) 470F: Nominal Capacitance
- (4) (-): Polarity (Cathode Indicate)
- (5) 105: Maximum Operating Temp.
- (6) GF: Series
- (7) P1502: Production Cycle (P:PET, 15:Year 2015; 02:Week 2)
- (8) VENT: Safety Vent
Important Notes
- Specifications and descriptions are subject to change without notice.
- Operation conditions may affect capacitor lifetime; consult Capxon for application-specific calculations.
- For aerospace, military, life-saving, or life-sustaining applications, consult Capxon before design-in.
- Capxon does not warrant product suitability for buyer's intended purposes; buyer is responsible for ensuring suitability and selecting the correct product.
- Capxon disclaims all warranties, express or implied, except for written express warranties.
- Further information is available on the Capxon website: www.capxongroup.com.
2009251934_CapXon-GF471M035F160A_C699528.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
