Product Overview
The ZV Series capacitors are designed for high-density mounting with low impedance at 100 KHz, making them suitable for demanding applications. They offer a long load life of 2000 hours at 105 and are compatible with reflow soldering. These capacitors are RoHS compliant.
Product Attributes
- Series: ZV Series
- Compliance: RoHS Compliant
- Mounting: Available for high density mounting
- Soldering: Reflow soldering is available
Technical Specifications
| Performance Characteristics | Value |
|---|---|
| Operating Temperature Range | -55~ +105 |
| Rated Voltage Range | 6.3~50 VDC |
| Capacitance Range | 1 to 1500F |
| Capacitance Tolerance | 20%(120Hz,+20) |
| Leakage Current (+20,max.) | 0.01CV or 3(A), whichever is greater (measured with rated working voltage applied after 2 minutes) |
| Dissipation Factor (tanat 20120Hz) | See table below |
| Low Temperature Characteristics (at 120Hz) | Impedance ratio Z-25Z+20: 2 (max. for 6.3V-50V) Impedance ratio Z-55Z+20: 3 (max. for 6.3V-10V), 6 (max. for 10V), 4 (max. for 16V-50V) |
| Load Life Test conditions | Duration time: 2000 Hrs Ambient temperature: +105 Applied voltage: Rated DC working voltage After test requirement at +105: Capacitance change: 25% of initial value; Dissipation factor: 200% of initial specified value; Leakage current: Initial specified value |
| Shelf Life Test conditions | Duration time: 1000 Hrs Ambient temperature: +105 Applied voltage: None After test requirement at +20: Same limits as Load life. (Pre-treatment for measurements: DC working voltage for 30 minutes) |
| Resistance to soldering heat | Capacitors on hot plate at 250 for 30 seconds. After test requirements: Leakage current: Less than specified value; Capacitance change: Within 10% of initial value; tan: Less than specified value. |
ZV Series Case Size & Ripple Current (mA, rms) at 105, 100KHz
| WV (SV) | Cap (F) | 6.3 (8) | 10 (13) | 16 (20) | 25 (32) | 35 (44) | 50 (63) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Ripple | Size | Ripple | Size | Ripple | Size | Ripple | Size | Ripple | Size | Ripple | |||||
| 1.0 | 4X5.5 | 53 | 4X5.5 | 53 | 2.2 | 4X5.5 | 53 | 4X5.5 | 53 | 3.3 | 4X5.5 | 53 | 4X5.5 | 53 | ||
| 4.7 | 4X5.5 | 53 | 4X5.5 | 53 | 4X5.5 | 53 | 4X5.5 | 53 | 4X5.5 | 53 | 4X5.5 | 53 | ||||
| 6.8 | 4X5.5 | 58 | 4.5 | 4X5.5 | 65 | 4.0 | 5X5.5 | 65 | 4 | 5X5.5 | 85 | 2.8 | - | - | ||
| 10 | 4X5.5 | 65 | 5 | 4X5.5 | 74 | 3.7 | 4X5.5 | 90 | 3.5 | 5X5.5 | 90 | 3.5 | 5X5.5 | 98 | 2.5 | |
| 15 | 4X5.5 | 70 | 4.6 | 5X5.5 | 100 | 2.2 | 5X5.5 | 120 | 1.8 | 6.3X5.5 | 130 | 1.8 | 6.3X5.5 | 115 | 1.8 | |
| 22 | 4X5.5 | 53 | 3.5 | 4X5.5 | 80 | 2.6 | 4X5.5 | 83 | 3.0 | 5X5.5 | 128 | 1.7 | 5X5.5 | 140 | 1.4 | |
| 27 | 4X5.5 | 65 | 3.2 | 5X5.5 | 85 | 2.4 | 5X5.5 | 135 | 1.9 | 6.3X5.5 | 145 | 1.4 | 6.3X7.7 | 160 | 1.35 | |
| 33 | 4X5.5 | 80 | 2.8 | 4X5.5 | 85 | 2.3 | 5X5.5 | 160 | 2.2 | 5X5.5 | 145 | 1.4 | 6.3X5.5 | 185 | 1.2 | |
| 47 | 4X5.5 | 82 | 2.4 | 5X5.5 | 130 | 2.0 | 5X5.5 | 170 | 2.0 | 6.3X5.5 | 180 | 1.2 | 6.3X5.5 | 200 | 1.0 | |
| 56 | 5X5.5 | 94 | 1.70 | 6.3X5.5 | 180 | 1.45 | 6.3X5.5 | 195 | 1.3 | 6.3X5.5 | 195 | 1.15 | 6.3X7.7 | 230 | 0.73 | |
| 68 | 5X5.5 | 100 | 1.6 | 6.3X5.5 | 195 | 1.4 | 6.3X5.5 | 205 | 1.2 | 6.3X5.5 | 200 | 1.1 | 6.3X7.7 | 240 | 0.7 | |
| 100 | 5X5.5 | 110 | 1.5 | 6.3X5.5 | 210 | 1.3 | 6.3X5.5 | 210 | 1.1 | 6.3X7.7 | 220 | 0.75 | 6.3X7.7 | 270 | 0.67 | |
| 150 | 6.3X5.5 | 170 | 0.95 | 6.3X5.5 | 220 | 1.0 | 6.3X7.7 | 225 | 0.8 | 8X10.5 | 420 | 0.5 | 8X10.5 | 430 | 0.45 | |
| 220 | 6.3X5.5 | 195 | 0.6 | 6.3X7.7 | 245 | 0.6 | 6.3X7.7 | 250 | 0.75 | 8X10.5 | 480 | 0.3 | 8X10.5 | 450 | 0.25 | |
| 330 | 6.3X7.7 | 230 | 0.51 | 8X10.5 | 400 | 0.36 | 8X10.5 | 470 | 0.34 | 8X10.5 | 510 | 0.26 | 10X10.5 | 570 | 0.23 | |
| 470 | 8X10.5 | 380 | 0.45 | 8X10.5 | 470 | 0.32 | 8X10.5 | 520 | 0.3 | 10X10.5 | 570 | 0.18 | - | - | - | - |
| 680 | 8X10.5 | 420 | 0.42 | 10X10.5 | 620 | 0.29 | 10X10.5 | 600 | 0.26 | - | - | - | - | - | - | |
| 1000 | 8X10.5 | 470 | 0.28 | 10X10.5 | 670 | 0.25 | 10X10.5 | 500 | 0.25 | - | - | - | - | - | ||
| 1200 | 10X10.5 | 530 | 0.20 | - | - | - | - | - | - | - | - | - | - | |||
| 1500 | 10X10.5 | 570 | 0.17 | - | - | - | - | - | - | - | - | - | - | |||
ZV Series Max Impedance () at 20, 100 KHz
| Working voltage(VDC) | Z-25Z+20 | Z-55Z+20 |
|---|---|---|
| 6.3 | 2 | 8 |
| 10 | 3 | 6 |
| 16 | 2 | 4 |
| 25 | 2 | 4 |
| 35 | 2 | 3 |
| 50 | 2 | 3 |
ZV Series D.F. (%) max. at 120Hz, 20
| Working voltage(VDC) | D.F. (%) max. |
|---|---|
| 6.3 | 26 |
| 10 | 19 |
| 16 | 16 |
| 25 | 16 |
| 35 | 14 |
| 50 | 12 |
ZV Series Multiplier for Ripple Current vs. Frequency
| CAP(F)Frequency(Hz) | 60(50) | 120 | 400 | 1K | 10K | 50K-100K |
|---|---|---|---|---|---|---|
| 10 | 0.47 | 0.59 | 0.76 | 0.85 | 0.97 | 1.0 |
| 10CAP100 | 0.52 | 0.65 | 0.80 | 0.89 | 0.97 | 1.0 |
ZV Series Dimensions (unit:mm)
| D | L | A | B | C | W | P |
|---|---|---|---|---|---|---|
| 4 | 5.5 | 4.3 | 4.3 | 4.9 | 0.5~0.8 | 1.0 |
| 5 | 5.5 | 5.3 | 5.3 | 5.9 | 0.5~0.8 | 1.4 |
| 6.3 | 5.5 | 6.6 | 6.6 | 7.2 | 0.5~0.8 | 2.2 |
| 6.3 | 7.7 | 6.6 | 6.6 | 7.2 | 0.5~0.8 | 2.2 |
| 8 | 6.5 | 8.3 | 8.3 | 9.0 | 0.5~0.8 | 2.3 |
| 8 | 10.5 | 8.3 | 8.3 | 9.0 | 0.7~1.1 | 3.1 |
| 10 | 10.5 | 10.3 | 10.3 | 11.0 | 0.7~1.1 | 4.5 |
2410010302_CapXon-ZV100M035C055ETR_C122511.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible