<
>
Specifications
Operating Temperature:
-40℃~+105℃
Lifetime:
-
Capacitance:
1000uF
Height - Seated (Max):
20mm
Pin Spacing:
-
Voltage Rating:
35V
Diameter:
13mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
KF102M035I200A
Package:
Through Hole,D13xL20mm
Key Attributes
Model Number:
KF102M035I200A
Product Description
Product Overview
This document details the CAPXON KF Series Aluminum Electrolytic Capacitors, designed for general-purpose applications. These capacitors offer a wide operating temperature range of -40 to +105 and are built to meet the standards of JIS-C-5101-1(2010). They are suitable for various electronic circuits requiring reliable capacitance and voltage ratings.
Product Attributes
- Brand: CAPXON
- Series: KF
- Origin: Taiwan (CAPXON ELECTRONIC INDUSTRIAL CO., LTD), China (CAPXON ELECTRONIC (SHEN ZHEN) CO.,LTD)
- Compliance: RoHS
- Mounting & Installation: Design according to EIAJ RCR-2367 standards
Technical Specifications
| Model/Part Number | Capacitance (F) | Capacitance Tolerance (%) | Rated Working Voltage (VDC) | Surge Voltage (VDC) | Max. Dissipation Factor (%) at 100KHz/105 | Ripple Current (mA) at 100KHz/105 | Max. Impedance () at 100KHz | Max. Leakage Current (A) | Operating Temperature () | Case Size (D* L mm) | Lead Treatment |
|---|---|---|---|---|---|---|---|---|---|---|---|
| KF102M035I200A | 1000 | 20 | 35 | 40 | 10 | 1900 | 0.044 | 350 | -40~+105 | 13X20 | PET Sleeve |
Detailed Specifications & Test Conditions
| Parameter | Condition/Criteria |
|---|---|
| Leakage Current Test | I0.01CV or 3(A) for 6.3 to 100VDC; I0.03CV(A) for 160 to 450VDC. Measured after 2 minutes with rated working voltage applied. |
| Operating Temperature | 6.3~100VDC: 0.4715000F for -40+105; 160~450VDC: 0.47470F for -25+105 |
| Capacitance & Dissipation Factor Test | At +20, 120Hz |
| Load Life Test | At +105 for (5-6.3)2000Hrs, (8)3000Hrs, (10)5000Hrs, (160V~450V:2000Hrs). |
| Shelf Life Test | At +105, for 1000hrs. |
| Terminal Strength (Pull) | Refer to document for specific forces based on terminal diameter. |
| Terminal Strength (Bending) | Refer to document for specific bends and loads for LUG terminals. SNAP-IN type does not have bending experiments. |
| Soldering Heat Resistance | Appearance: No significant damage, legible marking, no electrolyte leakage. Capacitance change: Within 5%. Tan : Not more than specified. Leakage current: Not more than specified. |
| Solderability Test | At least 95% of the circumferential surface of the dipped portion of the terminal shall be covered with new solder. |
| Temperature Cycles | Refer to JIS-C-5101-1 (2010) No:1-10. Criteria: Capacitance change within 5%, Tan not more than specified, Leakage current not more than specified, Appearance: No leakage and damaged. |
| Vibration | Frequency range 2 to 3000Hz, Amplitude or Acceleration 0.75 mm or 98m/s. Criteria: Capacitance change within 5%, Tan not more than specified, Leakage current not more than specified, Appearance: No leakage and damaged. |
| Damp Heat Steady State | +402, 90 to 95%RH for 250 or 500 hours. Criteria: Capacitance change within 20% or 10%, Tan not more than 120%, Leakage current not more than specified, Appearance: No leakage and damaged. |
| Endurance | At 1052 with rated DC voltage. Test times vary by diameter (2000-5000Hrs). Criteria: Capacitance change within 20%, Tan not more than 200%, Leakage current not more than specified, Appearance: No leakage and damaged. |
| Surge Voltage Test | 1.15x Rated Voltage (315V) or 1.1x Rated Voltage (>315V). 1000 cycles. Criteria: Capacitance change within 15%, Tan not more than specified, Leakage current not more than specified, Appearance: No leakage and damaged. |
| Pressure Relief Vent | Reverse voltage test. Criteria: No sparking, no shorting, no breaking out of electrolyte paper, vent opening. |
| High Temperature Storage | 1000 hours at 1052 without voltage. Criteria: Capacitance change within 20%, Tan not more than 200%, Leakage current not more than specified, Appearance: No leakage and damaged. |
| High and Low Temperature Characteristics | Impedance ratio test at -25 and -40 relative to +20. Criteria: Refer to table for impedance ratios. Capacitance change within 30%, Tan not more than specified, Leakage current not more than 800% of initial specified value. |
| Marking | CapXon trademark, Rated voltage, Nominal capacitance, Polarity, Max operating temperature, Series, Production date code, Safety vent. |
2410121505_CapXon-KF102M035I200A_C59327.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
