<
>
Specifications
Operating Temperature:
-55℃~+105℃
Lifetime:
2000hrs@105℃
Capacitance:
220uF
Height - Seated (Max):
11mm
Voltage Rating:
16V
Pin Spacing:
2.5mm
Diameter:
6.3mm
Equivalent Series Resistance(ESR):
150mΩ@100kHz
Tolerance:
±20%
Ripple Current:
490mA@100kHz
Mfr. Part #:
GF221M016E110A
Package:
Through Hole,D6.3xL11mm
Key Attributes
Model Number:
GF221M016E110A
Product Description
Product Overview
The CAPXON GF Series Aluminum Electrolytic Capacitors are designed for general-purpose applications. These capacitors offer reliable performance across a wide operating temperature range of -55 to +105. They are manufactured by CAPXON ELECTRONIC INDUSTRIAL CO.,LTD and CAPXON ELECTRONIC (SHEN ZHEN) CO.,LTD, with production complying with RoHS environmental policies.
Product Attributes
- Brand: CAPXON
- Series: GF
- Origin: Taiwan / China
- Material: Aluminum Electrolytic
- Sleeve Material: PET Sleeve
- Environmental Compliance: RoHS
- Certifications: Applicable to general-purpose grade capacitors of JIS-C-5101-1(2010)
Technical Specifications
| CAPXON P/N | Cap. (F) | Cap Tol. (%) | Rate W.V (VDC) | Surge Volt (VDC) | Max.D.F (%) | Ripple Current 100KHz/105 (mA) | Max.Im. 100KHz/20 () | Max.LC (A) | Oper. Temp. () | Case Size D* L mm | USER P/N |
|---|---|---|---|---|---|---|---|---|---|---|---|
| GF221M016E110A | 220 | 20 | 16 | 18 | 12 | 490 | 0.15 | 35.2 | -55~+105 | 6.3X11 | GF221M016E110A |
Dimensions
Diagram of Dimensions (Unit=mm):
| D | L | F | d |
|---|---|---|---|
| 6.3 | 11 | 2.5 | 0.5 0.02 |
Note: L1.5
Part Number System
The catalog part number format describes the product as follows:
- (1) Series: The series name (e.g., GF).
- (2) Capacitance: Capacitance in microfarads (F).
- (3) Capacitance tolerance: Tolerance percentage (e.g., 20%).
- (4) Voltage (W.V): Rated working voltage in VDC (e.g., 16V).
- (5) Case (D: mm): Diameter of the case in mm (e.g., 6.3).
- (6) Height (L: mm): Height of the case in mm (e.g., 11).
- (7) Product type: Type of product (e.g., Radial type).
- (8) Lead Treatment: Type of lead treatment (e.g., Without Lead Treatment).
- (9) Special & appearance requirement: Special requirements or appearance modifications.
Performance Test Environment & Criteria
- Leakage current (L.C.): I0.01CV or 3(), whichever is greater, measured after 2 minutes at rated working voltage.
- Capacitance (Cap.): Within specified tolerance at 120Hz20%, 0.5Vrms max.
- Dissipation factor (tan): Max values specified for different voltage ratings. For capacitance > 1000F, add 2% per 1000F.
- Terminal strength: Pull strength and lead bending strength tests performed according to specified forces and criteria.
- Soldering Heat Resistance Test: Criteria include appearance, capacitance change (within 5%), tan , and leakage current.
- Solderability Test: At least 95% of the dipped terminal surface covered with new solder.
- Temperature cycles: Capacitance change within 5%, tan and leakage current within specified values.
- Vibration: Capacitance change within 5%, tan and leakage current within specified values.
- Damp Heat Steady State Test: Capacitance change within 20% (or 10% for endurance >2000H), tan and leakage current within specified values.
- Endurance: Capacitance change within 20%, tan (not more than 200% of specified), leakage current within specified values. Test times vary by case size (2000Hrs for 5-6.3, 3000Hrs for 8, 5000Hrs for 10) at 1052.
- Surge voltage test: Surge voltage is 1.15x rated voltage (315V) or 1.1x rated voltage (>315V). Capacitance change within 15%.
- Pressure relief vent: Vent operates under reverse voltage; no sparking, shorting, or electrolyte paper breaking out.
- High Temperature Storage: Capacitance change within 20%, tan (not more than 200% of specified), leakage current within specified values after 1000 hours at 1052.
- High and Low Temperature characteristics: Impedance ratio and capacitance change within specified values at different temperatures.
Marking
Each capacitor is marked with:
- CapXon: Manufacturer trademark
- Rated voltage (e.g., 16V)
- Nominal capacitance (e.g., 100F)
- Polarity indicator (-)
- Maximum operating temperature (e.g., 105)
- Series (e.g., GF)
- Production date code (e.g., P1018)
- VENT (for safety vent)
Remarks
- Leakage Current Test: Measured with rated working voltage applied after 2 minutes.
- Operating temperature: -55+105 for 6.3~100VDC, 4.76800F.
- Capacitance and Dissipation factor Test: At +20, 120Hz.
- Load Life Test: At +105 for specified durations based on case size.
- Shelf Life Test: At +105 for 1000hrs.
- Capacitors are suitable for specified electric models; contact manufacturer for other applications.
- Capacitors can withstand transportation conditions from -55 to +105 and altitudes up to 200,000 feet.
- Cleaning with halogenated agents may cause corrosion.
- Mounting and Installation design according to EIAJ RCR-2367 standards.
2108241430_CapXon-GF221M016E110A_C2858380.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
