<
>
Specifications
Operating Temperature:
-55℃~+105℃
Lifetime:
2000hrs@105℃
Capacitance:
220uF
Height - Seated (Max):
10.5mm
Voltage Rating:
35V
Diameter:
8mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
DV221M035F105ETR
Package:
SMD,D8xL10.5mm
Key Attributes
Model Number:
DV221M035F105ETR
Product Description
Product Overview
The DV Series chip-type capacitors are designed for high-density PC boards and automatic mounting machines. These low-impedance capacitors offer a load life of 2000 hours at +105 and are compliant with the RoHS directive. They are suitable for applications requiring high reliability and performance in a compact surface-mount package.
Product Attributes
- Chip type
- Low impedance
- Designed for surface mounting on high density PC board
- Applicable to automatic mounting machine using carrier tape
- Complied to the RoHS directive
Technical Specifications
| Item | Performance Characteristics |
|---|---|
| Operating Temperature Range | -55~ +105 |
| Rated Voltage Range | 6.3~50 VDC |
| Capacitance Range | 1 to 1500F |
| Capacitance Tolerance | 20%(120Hz,+20) |
| Leakage Current (max.) | I0.01 CV or 3 (A) After 2 minutes whichever is greater (measured with rated working voltage applied at +20) |
| Dissipation Factor (tanat 20120Hz) | See table below |
| Low Temperature Characteristics (at 120Hz) | Impedance ratio max (Z-25Z+20 and Z-55Z+20) |
| Load Life Test conditions | Duration time: 2000 Hrs, Ambient temperature: +105, Applied voltage: Rated DC working voltage. After test requirement at +20: Capacitance change: Within 30% of initial value, Dissipation factor: Less than 300% of specified value, Leakage current: Less than specified value. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. |
| Shelf Life Test conditions | Duration time: 1000 Hrs, Ambient temperature: +105, Applied voltage: None. After test requirement at +20: Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. |
| Resistance to soldering heat | Capacitors restored to 20 after exposing at 250 for 30 seconds must satisfy: Leakage current: Less than specified value, Capacitance change: Within 10% of initial value, tan: Less than specified value. |
Dissipation Factor (tan, %) max. at 20, 120Hz
| Working voltage(VDC) | D.F. (%) max. |
|---|---|
| 6.3 | 24 |
| 10 | 19 |
| 16 | 16 |
| 25 | 14 |
| 35 | 14 |
| 50 | 12 |
Impedance Ratio (Z-25Z+20) and (Z-55Z+20) max.
| Working voltage(VDC) | Z-25Z+20 | Z-55Z+20 |
|---|---|---|
| 6.3 | 2 | 8 |
| 10 | 2 | 6 |
| 16 | 2 | 4 |
| 25 | 2 | 4 |
| 35 | 2 | 3 |
| 50 | 2 | 3 |
Dimensions (unit:mm)
| CAP(F) | D | L | A | B | C | W | P |
|---|---|---|---|---|---|---|---|
| CAP10 | 4 | 5.5 | 4.3 | 4.3 | 4.9 | 0.5~0.8 | 1.0 |
| 10CAP100 | 5 | 5.5 | 5.3 | 5.3 | 5.9 | 0.5~0.8 | 1.4 |
| CAP(F)Frequency(Hz) | 60(50) | 120 | 400 | 1K | 10K | 50K-100K | |
| 0.47 | 0.52 | 0.65 | 0.80 | 0.89 | 1.0 | 1.0 | |
| 0.59 | 0.76 | 0.85 | 0.97 | 1.0 | |||
| 6.3 | 6.3 | 7.7 | 6.6 | 6.6 | 7.2 | 0.5~0.8 | 2.2 |
| 8 | 8 | 10.5 | 8.3 | 8.3 | 9.0 | 0.7~1.1 | 3.1 |
| 10 | 10 | 10.5 | 10.3 | 10.3 | 11.0 | 0.7~1.1 | 4.5 |
DV Series Case Size DxL(mm), WV (SV), Cap (F), Ripple Current (mA, rms) at 105 100KHz, Max Impedance () at 20 100 KHz
| Cap (F) | 6.3 (8) | 10 (13) | 16 (20) | 25 (32) | 35 (44) | 50 (63) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Ripple | Impedance | Size | Ripple | Impedance | Size | Ripple | Impedance | Size | Ripple | Impedance | Size | Ripple | Impedance | Size | Ripple | Impedance | |
| 1.0 | 4X5.5 | 55 | 4.5 | 4X5.5 | 55 | 4.5 | 4X5.5 | 80 | 2.8 | 4X5.5 | 55 | 4.5 | 4X5.5 | 85 | 2.3 | 4X5.5 | 55 | 4.5 |
| 1.5 | 4X5.5 | 70 | 2.8 | 4X5.5 | 88 | 2.2 | 5X5.5 | 75 | 3.8 | 5X5.5 | 125 | 1.4 | 6.3X5.5 | 130 | 2.2 | |||
| 2.2 | 4X5.5 | 80 | 2.2 | 4X5.5 | 85 | 2.1 | 4X5.5 | 90 | 2.0 | 5X5.5 | 95 | 2.8 | 5X5.5 | 125 | 1.4 | 6.3X5.5 | 130 | 2.2 |
| 3.3 | 4X5.5 | 85 | 2.0 | 5X5.5 | 125 | 1.9 | 5X5.5 | 140 | 1.2 | 6.3X5.5 | 140 | 1.6 | ||||||
| 4.7 | 4X5.5 | 75 | 2.2 | 4X5.5 | 80 | 2.2 | 4X5.5 | 90 | 1.98 | 5X5.5 | 145 | 1.2 | 5X5.5 | 155 | 1.1 | 6.3X5.5 | 150 | 1.3 |
| 6.8 | 4X5.5 | 70 | 2.8 | 4X5.5 | 88 | 2.2 | 5X5.5 | 75 | 3.8 | 5X5.5 | 125 | 1.4 | 6.3X5.5 | 130 | 2.2 | |||
| 10 | 4X5.5 | 80 | 2.2 | 4X5.5 | 85 | 2.1 | 4X5.5 | 90 | 2.0 | 5X5.5 | 95 | 2.8 | 5X5.5 | 125 | 1.4 | 6.3X5.5 | 130 | 2.2 |
| 15 | 4X5.5 | 85 | 2.0 | 5X5.5 | 125 | 1.9 | 5X5.5 | 140 | 1.2 | 6.3X5.5 | 140 | 1.6 | ||||||
| 22 | 4X5.5 | 75 | 2.2 | 4X5.5 | 80 | 2.2 | 4X5.5 | 90 | 1.98 | 5X5.5 | 145 | 1.2 | 5X5.5 | 155 | 1.1 | 6.3X5.5 | 150 | 1.3 |
| 27 | 4X5.5 | 79 | 1.98 | 5X5.5 | 125 | 1.9 | 5X5.5 | 170 | 0.74 | 6.3X5.5 | 200 | 0.62 | 6.3X5.5 | 210 | 0.6 | 6.3X7.7 | 180 | 1.2 |
| 33 | 4X5.5 | 82 | 1.9 | 4X5.5 | 90 | 1.85 | 6.3X5.5 | 185 | 0.6 | 5X5.5 | 160 | 1.05 | 6.3X5.5 | 230 | 0.54 | 6.3X7.7 | 190 | 0.71 |
| 47 | 4X5.5 | 86 | 1.88 | 5X5.5 | 165 | 1.1 | 5X5.5 | 195 | 1.05 | 6.3X5.5 | 220 | 0.56 | 6.3X5.5 | 240 | 0.53 | 6.3X7.7 | 230 | 0.7 |
| 56 | 5X5.5 | 150 | 1.10 | 6.3X5.5 | 210 | 0.57 | 6.3X5.5 | 220 | 0.56 | 6.3X5.5 | 230 | 0.54 | 6.3X7.7 | 250 | 0.49 | 8X10.5 | 300 | 0.52 |
| 68 | 5X5.5 | 160 | 0.9 | 6.3X5.5 | 220 | 0.55 | 6.3X5.5 | 230 | 0.54 | 6.3X5.5 | 240 | 0.48 | 6.3X7.7 | 265 | 0.4 | 8X10.5 | 320 | 0.5 |
| 100 | 5X5.5 | 170 | 0.8 | 6.3X5.5 | 240 | 0.53 | 6.3X5.5 | 255 | 0.52 | 6.3X7.7 | 290 | 0.38 | 6.3X7.7 | 300 | 0.38 | 8X10.5 | 350 | 0.46 |
| 150 | 6.3X5.5 | 235 | 0.51 | 6.3X5.5 | 250 | 0.49 | 6.3X7.7 | 265 | 0.45 | 8X10.5 | 480 | 0.25 | 8X10.5 | 510 | 0.24 | 10X10.5 | 600 | 0.25 |
| 220 | 6.3X5.5 | 240 | 0.48 | 6.3X7.7 | 270 | 0.44 | 6.3X7.7 | 275 | 0.43 | 8X10.5 | 530 | 0.22 | 8X10.5 | 570 | 0.21 | 10X10.5 | 650 | 0.23 |
| 330 | 6.3X7.7 | 275 | 0.36 | 8X10.5 | 500 | 0.25 | 8X10.5 | 550 | 0.25 | 8X10.5 | 570 | 0.2 | 10X10.5 | 650 | 0.15 | |||
| 470 | 8X10.5 | 450 | 0.28 | 8X10.5 | 550 | 0.25 | 8X10.5 | 590 | 0.22 | 10X10.5 | 650 | 0.15 | ||||||
| 680 | 8X10.5 | 500 | 0.25 | 10X10.5 | 680 | 0.2 | 10X10.5 | 720 | 0.16 | |||||||||
| 1000 | 8X10.5 | 530 | 0.20 | 10X10.5 | 740 | 0.15 | 10X10.5 | 570 | 0.17 | |||||||||
| 1200 | 10X10.5 | 600 | 0.16 | |||||||||||||||
| 1500 | 10X10.5 | 650 | 0.13 | |||||||||||||||
2412052036_CapXon-DV221M035F105ETR_C65219.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
