Online Service

Online Service

Contact Person
+86 136 6733 2386
quality KM Series CapXon KM101M035E110A Capacitor with Safety Vent Construction and RoHS Compliance Features factory
<
quality KM Series CapXon KM101M035E110A Capacitor with Safety Vent Construction and RoHS Compliance Features factory
>
Specifications
Lifetime:
2000hrs@105℃
Capacitance:
100uF
Height - Seated (Max):
11mm
Pin Spacing:
2.5mm
Voltage Rating:
35V
Diameter:
6.3mm
Tolerance:
±20%
Mfr. Part #:
KM101M035E110A
Package:
Through Hole,D6.3xL11mm
Key Attributes
Model Number: KM101M035E110A
Product Description

KM Series Standard 105 Capacitors

Product Overview
The KM Series Standard 105 capacitors are designed for reliable performance in demanding applications, particularly within communication equipment and switching power supplies. Featuring a safety vent construction, these capacitors offer enhanced safety and durability. They are RoHS Compliant, ensuring adherence to environmental standards.

Product Attributes

  • Brand: KM Series
  • Temperature Rating: 105
  • Compliance: RoHS Compliant
  • Features: Safety vent construction design

Technical Specifications

Performance Characteristics

Item Specifications
Operating Temperature Range -40 to +105 / -25 to +105
Rated Voltage Range 6.3 to 100 VDC / 160 to 450 VDC
Capacitance Range 0.1 to 22000 F / 0.47 to 470 F
Capacitance Tolerance ±20% (120Hz, +20)
Leakage Current (max.) I≤0.01 CV or 3 (A) after 1 minute (rated working voltage applied) / I≤0.03 CV (A) after 1 minute (rated working voltage applied)
Dissipation Factor (tanδ, at 20, 120Hz) For capacitance >1000μF, add 2% per another 1000μF.
Low Temperature Characteristics (at 120Hz) Impedance ratio max: Z-25/Z+20 (See table below) / Z-40/Z+20 (See table below)
Load Life Test Duration: 2000Hrs, Ambient Temp: +105, Applied Voltage: Rated DC working voltage. Requirements: Capacitance change ≤ ±20%, Dissipation factor ≤ 200% of initial, Leakage current ≤ initial specified value.
Shelf Life Test Duration: 1000Hrs, Ambient Temp: +105, Applied Voltage: None. Requirements: Same limits as Load life.
Pre-treatment for measurements Application of DC working voltage for 30 minutes.

Dissipation Factor (D.F. %)max.

Working Voltage (VDC) 6.3 10 16 25 35 50 63 100
D.F. (%)max. 22 17 15 14 12 10 9 8
Working Voltage (VDC) 160 200 250 350 400 450
D.F. (%)max. 12 12 12 15 15 17

Low Temperature Characteristics (Z-25/Z+20 and Z-40/Z+20)

Working Voltage (VDC) 6.3 10 16 25 35 50 63 100
Z-25/Z+20 4 3 2 2 2 2 2 2
Z-40/Z+20 8 6 4 3 3 3 3 3
Working Voltage (VDC) 160 200 250 350 400 450
Z-25/Z+20 2 2 3 5 6 6

Dimensions and Ripple Current

Note: For Capacitance >1000 μF, add 0.5 per another 1000 μF for -25/+20. For Capacitance >1000 μF, add 1 per another 1000 μF for -40/+20.

Series Size ΦDxL (mm) WV (SV) Cap (μF) Ripple Current (mA, rms) at 105 120Hz
KM Series 5X11 6.3 4.7 26
6.3 6.8 32
6.3 10 35
6.3 22 45
6.3 33 54
6.3 47 65
6.3 68 75
6.3 100 96
6.3 120 110
6.3 150 120
Series Size ΦDxL (mm) WV (SV) Cap (μF) Ripple Current (mA, rms) at 105 120Hz
KM Series 5X11 50 0.1 1.3
50 0.22 2.9
50 0.33 4
50 0.47 7
50 1 13
KM Series 6.3X11 50 2.2 20
50 3.3 26
50 4.7 32
50 6.8 40
50 10 48

Multiplier for Ripple Current vs. Frequency

CAP(μF) \ Frequency(Hz) 50(60) 120 400 1K 10K 50K-100K
CAP ≤10 0.8 1 1.30 1.45 1.65 1.70
10<CAP≤100 0.8 1 1.23 1.36 1.48 1.53
100<CAP≤1000 0.8 1 1.16 1.25 1.35 1.38
1000<CAP 0.8 1 1.11 1.17 1.25 1.28

Diagram of Dimensions (unit:mm)

Note: Specific dimensions (D, L, dΦ, F, DΦ) are detailed in the full datasheet and vary based on capacitance and voltage ratings.

Condition Dimension Value (mm)
D D<18 1.5
D=18 2.0
D>18 2.0
L L<35.5 1.5
L≥35.5 2.0
- 0.5 / 0.6 / 0.8
- 5 / 6.3 / 8 / 10 / 13 / 16 / 18 / 22
F - 2.0 / 2.5 / 3.5 / 5.0 / 7.5 / 10

For detailed specifications, please refer to Engineering Bulletin No. E102.


2304140030_CapXon-KM101M035E110A_C59374.pdf
Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max