Product Overview
The DV Series chip-type capacitors are designed for surface mounting on high-density PC boards, offering low impedance and a load life of 2000 hours at +105. These capacitors are suitable for automatic mounting machines using carrier tape and comply with the RoHS directive. They are ideal for applications requiring reliable performance under demanding conditions.
Product Attributes
- Chip type
- Low impedance
- Designed for surface mounting
- Complied to the RoHS directive
Technical Specifications
| Item | Performance Characteristics |
|---|---|
| Operating Temperature Range | -55~ +105 |
| Rated Voltage Range | 6.3~50 VDC |
| Capacitance Range | 1 to 1500F |
| Capacitance Tolerance | 20%(120Hz,+20) |
| Leakage Current (max.) | I0.01 CV or 3 (A) After 2 minutes (measured with rated working voltage applied at +20) |
| Dissipation Factor (tanat 20120Hz) | See table below |
| Low Temperature Characteristics (at 120Hz) | Impedance ratio max (Z-25Z+20, Z-55Z+20) |
| Load Life Test Conditions | Duration: 2000 Hrs, Ambient Temp: +105, Applied Voltage: Rated DC working voltage. After test requirement at +20: Capacitance change: Within 30% of initial value, Dissipation factor: Less than 300% of specified value, Leakage current: Less than specified value. |
| Shelf Life Test Conditions | Duration: 1000 Hrs, Ambient Temp: +105, Applied Voltage: None. After test requirement at +20: Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. |
| Resistance to Soldering Heat | Capacitors restored to 20 after exposing at 250 for 30 seconds shall satisfy: Leakage current: Less than specified value, Capacitance change: Within 10% of initial value, tan: Less than specified value. |
Low Impedance Diagram of Dimensions:(unit:mm)
| CAP(F) | Frequency(Hz) | 60(50) | 120 | 400 | 1K | 10K | 50K-100K |
|---|---|---|---|---|---|---|---|
| CAP10 | 0.47 | 0.59 | 0.76 | 0.85 | 0.97 | 1.0 | |
| 10CAP100 | 0.52 | 0.65 | 0.80 | 0.89 | 0.97 | 1.0 |
Multiplier for Ripple Current vs. Frequency
| D | 4 | 5 | 6.3 | 6.3 | 8 | 8 | 10 |
|---|---|---|---|---|---|---|---|
| L | 5.5 | 5.5 | 5.5 | 7.7 | 6.5 | 10.5 | 10.5 |
| A | 4.3 | 5.3 | 6.6 | 6.6 | 8.3 | 8.3 | 10.3 |
| B | 4.3 | 5.3 | 6.6 | 6.6 | 8.3 | 8.3 | 10.3 |
| C | 4.9 | 5.9 | 7.2 | 7.2 | 9.0 | 9.0 | 11.0 |
| W | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 | 0.7~1.1 | 0.7~1.1 |
| P | 1.0 | 1.4 | 2.2 | 2.2 | 2.3 | 3.1 | 4.5 |
DV Series Case Size DxL(mm)
| WV (SV) | Cap (F) | Size | Ripple Impedance (mA, rms) at 105 100KHz | Max Impedance () at 20 100 KHz |
|---|---|---|---|---|
| 6.3 | 1.0 | 4X5.5 | 55 | 4.5 |
| 2.2 | 4X5.5 | 55 | 4.5 | |
| 3.3 | 4X5.5 | 80 | 2.8 | |
| 4.7 | 4X5.5 | 55 | 4.5 | |
| 6.8 | 4X5.5 | 70 | 2.8 | |
| 10 | 4X5.5 | 80 | 2.2 | |
| 15 | 4X5.5 | 85 | 2.0 | |
| 22 | 4X5.5 | 75 | 2.2 | |
| 27 | 4X5.5 | 79 | 1.98 | |
| 33 | 4X5.5 | 82 | 1.9 | |
| 10 | 1.0 | 4X5.5 | 55 | 4.5 |
| 2.2 | 4X5.5 | 55 | 4.5 | |
| 3.3 | 4X5.5 | 80 | 2.8 | |
| 4.7 | 4X5.5 | 55 | 4.5 | |
| 6.8 | 4X5.5 | 70 | 2.8 | |
| 10 | 4X5.5 | 80 | 2.2 | |
| 15 | 4X5.5 | 85 | 2.0 | |
| 22 | 4X5.5 | 75 | 2.2 | |
| 16 | 1.0 | 4X5.5 | 55 | 4.5 |
| 2.2 | 4X5.5 | 55 | 4.5 | |
| 3.3 | 4X5.5 | 80 | 2.8 | |
| 4.7 | 4X5.5 | 55 | 4.5 | |
| 6.8 | 4X5.5 | 70 | 2.8 | |
| 10 | 4X5.5 | 80 | 2.2 | |
| 25 | 1.0 | 4X5.5 | 55 | 4.5 |
| 2.2 | 4X5.5 | 55 | 4.5 | |
| 3.3 | 4X5.5 | 80 | 2.8 | |
| 4.7 | 4X5.5 | 55 | 4.5 | |
| 6.8 | 4X5.5 | 70 | 2.8 | |
| 35 | 1.0 | 4X5.5 | 55 | 4.5 |
| 2.2 | 4X5.5 | 55 | 4.5 | |
| 3.3 | 4X5.5 | 80 | 2.8 | |
| 4.7 | 4X5.5 | 55 | 4.5 | |
| 50 | 1.0 | 4X5.5 | 55 | 4.5 |
| 2.2 | 4X5.5 | 55 | 4.5 | |
| 3.3 | 4X5.5 | 80 | 2.8 |
| Working voltage(VDC) | D.F. (%) max. |
|---|---|
| 6.3 | 24 |
| 10 | 19 |
| 16 | 16 |
| 25 | 14 |
| 35 | 14 |
| 50 | 12 |
| Working voltage(VDC) | Z-25Z+20 | Z-55Z+20 |
|---|---|---|
| 6.3 | 2 | 8 |
| 10 | 2 | 6 |
| 16 | 2 | 4 |
| 25 | 2 | 4 |
| 35 | 2 | 3 |
| 50 | 2 | 3 |
2004271808_CapXon-DV101M035E077ETR_C65221.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible