Product Overview
The CapXon FH Series Aluminum Electrolytic Capacitor is designed for reliable performance in a wide range of applications. These capacitors offer a capacitance of 470F and a rated working voltage of 35VDC, with a surge voltage of 40VDC. They are built to withstand operating temperatures from -40C to 105C and feature a robust construction with a PET sleeve. The FH series is manufactured in China by CapXon Electronic (Shen Zhen) Co., Ltd., adhering to strict quality standards, including JIS-C-5101-1.
Product Attributes
- Brand: CapXon
- Series: FH
- Type: Aluminum Electrolytic Capacitor
- Origin: China
- Sleeve Material: PET
- Certifications/Standards: RoHS, JIS-C-5101-1
- Safety Feature: Vent (for capacitors with diameter 10mm)
Technical Specifications
| Specification | Value |
|---|---|
| Model Number | FH471M035G160A |
| Capacitance | 470F |
| Capacitance Tolerance | -20% ~ +20% |
| Rated Working Voltage (WVDC) | 35V |
| Surge Voltage (VDC) | 40V |
| Operating Temperature Range | -40C to +105C |
| Case Size (D*L) | 10mm * 16mm |
| Maximum Dissipation Factor (DF) at 100kHz/105C | 12% |
| Maximum Ripple Current at 100kHz/105C | 1385mA |
| Maximum Leakage Current (LC) | 164.5A |
| Maximum Impedance (IM) at 100kHz/20C | 0.068 |
| Endurance at 105C | 7000 Hours |
| Lead Diameter (d) | 0.6 mm 0.02 mm |
| Lead Spacing (F) | 5 mm 1.5 mm |
| Termination Type | PET Sleeve L |
Important Information
Note on Ripple Current: Maximum RMS ripple current values are tested at +105C and 100kHz. When operating at different temperatures or frequencies, multiply the values by the factors shown in Table 3. If ripple current is difficult to measure, the self-generated heat of the capacitor should be within 5C.
Note on Working Voltage: Ensure the applied voltage does not exceed the rated voltage. The peak voltage, including DC voltage overlapped by ripple current, must not exceed the rated voltage.
Note on Insulation: Standard capacitors have a vinyl sleeve for marking. For applications requiring insulation of the aluminum case, specially designed capacitors are recommended.
Note on Soldering: Excessive soldering temperature or time can cause sleeve shrinkage. Solder on the reverse side of the PC board. Maintain a distance between the capacitor sleeve and the circuit board to prevent melting or damage during soldering.
Note on Cleaning Agents: Avoid cleaning with halogenated organic solvents, as they may penetrate the capacitor and cause corrosion.
Note on Environmental Policy: CapXon uses no ozone-depleting chemicals and complies with environmental protection laws and RoHS regulations.
General Notes: 1. Specifications are subject to change without notice. 2. Operating conditions can affect capacitor lifetime; consult Capxon for lifetime calculations. 3. For aerospace, military, or life-critical applications, consult Capxon before design-in. 4. Buyers are responsible for ensuring product suitability for their intended application. 5. CapXon disclaims all warranties not expressly written. 6. Further information is available at www.capxongroup.com.
Characteristics Table
Table 1: Dissipation Factor (DF) (%) max
| Working Voltage (VDC) | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 100 |
|---|---|---|---|---|---|---|---|---|
| D.F.(%)max | 22 | 19 | 16 | 14 | 12 | 10 | 9 | 8 |
For capacitance >1000F, add 2% per another 1000F.
Table 2: Impedance Ratio max
| Working Voltage (VDC) | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 100 |
|---|---|---|---|---|---|---|---|---|
| Z-25Z+20 | 4 | 3 | 2 | 2 | 2 | 2 | 2 | 2 |
| Z-40Z+20 | 8 | 6 | 4 | 3 | 3 | 3 | 3 | 3 |
Table 3: Multiplier for Ripple Current vs. Frequency
| CAP(F)\Frequency(Hz) | 50(60) | 120 | 400 | 1K | 10K | 100K |
|---|---|---|---|---|---|---|
| CAP10 | 0.47 | 0.59 | 0.76 | 0.85 | 0.97 | 1.00 |
| 10CAP100 | 0.52 | 0.62 | 0.80 | 0.89 | 0.97 | 1.00 |
| 100CAP1000 | 0.58 | 0.72 | 0.84 | 0.90 | 0.98 | 1.00 |
| 1000CAP | 0.63 | 0.78 | 0.87 | 0.91 | 0.98 | 1.00 |
Marking Description
Example:
- (1) CapXon: Brand
- (2) 35V: Rated Voltage
- (3) 470F: Nominal Capacitance
- (4) (-): Polarity (Cathode Indicate)
- (5) 105: Maximum Operating Temp.
- (6) FH: Series
- (7) P1502: Production Code (P:PET, 15:Year 2015, 02:Week 2)
- (8) VENT: Safety Vent (Note: VENT marking is omitted for certain diameter/length combinations)
Front: CapXon 470uF 35V FH 105
Back: P1502 VENT
2108150230_CapXon-FH471M035G160A_C2858378.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
