<
>
Specifications
Operating Temperature:
-25℃~+105℃
Lifetime:
5000hrs@105℃
Capacitance:
100uF
Height - Seated (Max):
31.5mm
Pin Spacing:
7.5mm
Voltage Rating:
450V
Diameter:
18mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
1.89A@100kHz
Mfr. Part #:
KL101M450K315A
Package:
Through Hole,D18xL31.5mm
Key Attributes
Model Number:
KL101M450K315A
Product Description
Product Overview
The CapXon KL Series Aluminum Electrolytic Capacitors are designed for reliable performance in a wide range of applications. These capacitors offer stable electrical characteristics, robust construction, and adhere to strict quality standards, including JIS-C-5101-1. They are suitable for various industrial and electronic applications where dependable capacitance and voltage ratings are crucial.
Product Attributes
- Brand: CapXon
- Series: KL Type
- Origin: Guangdong Province, Shenzhen City, China (Manufactured by Capxon Electronic (Shen Zhen) Co., Ltd)
- Certifications/Standards: Complies with JIS-C-5101-1, JIS-C-5101-4 (non-SMD liquid capacitor), JIS-C-5101-18 (liquid SMD capacitor). Adheres to environmental regulations and RoHS standards.
- Environmental Policy: Does not use ozone-depleting chemicals (ODC) under the Montreal Protocol.
Technical Specifications
| Part Number | Capacitance (F) | Capacitance Tolerance (%) | Rated Working Voltage (VDC) | Surge Voltage (VDC) | Max. Dissipation Factor (%) | Max. Ripple Current (100kHz /105) (mA) | Max. Leakage Current (A) | Operating Temperature (C) | Case Size (D* L mm) | Endurance /105 (Hrs) | Dimensions (D x L) | Lead Diameter (d mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KL101M450K315A | 100 | -20~20 | 450 | 495 | 17 | 1890 | 1900 | -25~105 | 18X31.5 | 5000 | 18 x 31.5 | 0.8 |
Dimensions Diagram
Unit: mm
D: 18 mm
L: 31.5 mm
F: 7.5 mm
d: 0.8 mm
Part Number Explanation
KL: Series
101: Capacitance (100F)
M: Capacitance Tolerance (-20~20%)
450: Voltage (450V)
K: Case Diameter (18mm)
315: Case Length (31.5mm)
A: Lead Treatment/Special (PET Sleeve)
Technical Performance
| No. | Item | Conditions and Criterion |
|---|---|---|
| 1 | Range of working temperature | -25~105 (C) |
| 2 | Capacitance | Tolerance: -20~20% (Measured at 202C, 120Hz, 0.5Vrms) |
| 3 | Dissipation factor (tan) | See Table 1 (Measured at 202C, 120Hz, 0.5Vrms) |
| 4 | Leakage Current | I 1900 (A) (Measured after 1 min electrification with rated voltage and 100010% resistor) |
| 5 | Terminal strength | Tensile strength: 5N (d0.5mm), 10N (0.5d0.8mm), 20N (0.8d1.25mm). Bending strength: 2.5N (d0.5mm), 5N (0.5d0.8mm), 10N (0.8d1.25mm). No looseness, breakage, or bad connection. |
| 6 | Temperature characteristic | Impedance ratio must not exceed Table 2. LC 800% of initial specified value. |
| 7 | High temperature load | Capacitance Change Rate: C/C 20% of initial value. Dissipation Factor: DF 200% of specified value. Leakage Current: LC specified value. Appearance: No visible damage. (Tested after 5000H at 105C with rated DC working voltage) |
| 8 | High Temperature Exposure (Storage) | Capacitance Change Rate: C/C 20% of initial value. Dissipation Factor: DF 200% of specified value. Leakage Current: LC specified value. Appearance: No visible damage. (Tested after 1000H at 105C, no voltage applied) |
| 9 | Surge Test | Capacitance Change Rate: C/C 15% of initial value. Dissipation Factor: DF Original Spec value. Leakage Current: LC original Spec value. Appearance: No visible damage. (Tested after 1000 cycles of 30s charge/330s discharge at 495V) |
| 10 | Vibration | Capacitance Change Rate: C/C 5% of initial value. Dissipation Factor: DF Original Spec value. Leakage Current: LC original Spec value. Appearance: No visible damage. (Tested for 6 hours in X, Y, Z directions at 10~55Hz, 0.75mm amplitude, 98 m/s) |
| 11 | Solderability | Above 95% area of surroundings surface shall be covered by new soldering. (Tested after immersion in Sn-Ag-Cu solder at 2455C for 2.00.5s) |
| 12 | Resistance to soldering heat | Capacitance Change Rate: C/C 5% of initial value. Dissipation Factor: DF Original Spec value. Leakage Current: LC original Spec value. (Tested after immersion in Sn-Ag-Cu solder at 2603C for 101s) |
| 13 | Vent | No explosion, flash, flame, spark or fire. (For products with safety vent requirement) |
| 14 | Temperature Cycling | Capacitance Change Rate: C/C 5% of initial value. Dissipation Factor: DF Original Spec value. Leakage Current: LC original Spec value. Appearance: No visible damage. (10 cycles as per JIS-C-5101-1 No:4.16) |
| 15 | Steady State Damp Heat | Capacitance Change Rate: C/C 10% of initial value. Dissipation Factor: DF 1.2 times of the original Spec. value. Leakage Current: LC original Spec value. Appearance: No visible damage. (Tested after 500H at 402C, 90~95%RH) |
Characteristic Tables
Table 1: Dissipation Factor (DF) max. (%)
| Working Voltage (VDC) | 160 | 200 | 250 | 350 | 400 | 450 | 500 |
|---|---|---|---|---|---|---|---|
| D.F. (%)max. | 12 | 12 | 12 | 15 | 15 | 17 | 20 |
For capacitance >1000F, add 2% per another 1000F.
Table 2: Impedance ratio max.
| Working Voltage (VDC) | 160 | 200 | 250 | 350 | 400 | 450 | 500 |
|---|---|---|---|---|---|---|---|
| Z-25Z+20 | 3 | 3 | 3 | 5 | 5 | 6 | 6 |
| Z-40Z+20 | 4 | 5 | 6 | 6 | 6 | - | - |
Table 3: Multiplier for Ripple Current vs. Frequency
| Frequency (Hz) | 120 | 1K | 10K | 50K |
|---|---|---|---|---|
| Multiplier | 1 | 1.5 | 1.7 | 1.9 |
Marking
Example:
- (1) CapXon: Brand
- (2) 450V: Rated Voltage
- (3) 100F: Nominal Capacitance
- (4) (-) : Polarity (Cathode Indicate)
- (5) 105: Maximum Operating Temp.
- (6) KL: Series
- (7) P1502: Date Code (P:PET, 15:Year 2015, 02:Week 2)
- (8) VENT: Safety Vent
Front: KL 105 P1502 VENT
Back: CapXon 100uF 450V
Important Notes
- Specifications and descriptions are subject to change without notice.
- Operation conditions may affect capacitor lifetime; consult Capxon for lifetime calculations.
- For aerospace, military, life-saving, or life-sustaining applications, consult Capxon before design-in.
- Buyers are responsible for verifying product suitability for their intended applications.
- Capxon provides express warranties only and disclaims all other warranties.
- Further information is available on www.capxongroup.com.
2409272202_CapXon-KL101M450K315A_C2858377.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
