<
>
Specifications
Lifetime:
2000hrs@105℃
Capacitance:
220uF
Height - Seated (Max):
16mm
Pin Spacing:
5mm
Voltage Rating:
50V
Diameter:
10mm
Tolerance:
±20%
Mfr. Part #:
KF221M050G160ECA
Package:
Through Hole,D10xL16mm
Key Attributes
Model Number:
KF221M050G160ECA
Product Description
Product Overview
CapXon KF Series Aluminum Electrolytic Capacitors are designed for reliable performance in various electronic applications. These capacitors offer a wide operating temperature range of -40C to 105C and are built to meet stringent quality standards, adhering to JIS-C-5101-1 specifications. They feature a PET sleeve for marking and a safety vent for over-pressure protection. Ideal for general-purpose applications where stable capacitance and low leakage current are critical.
Product Attributes
- Brand: CapXon
- Product Type: Aluminum Electrolytic Capacitor
- Series: KF
- Origin: Shenzhen, China
- Compliance: RoHS, Montreal Protocol (no ozone-depleting chemicals used)
- Quality Standards: JIS-C-5101-1
Technical Specifications
| Part Number | Capacitance (F) | Capacitance Tolerance (%) | Rated Working Voltage (VDC) | Surge Voltage (VDC) | Max. Dissipation Factor (%) @ 100kHz/105 | Max. Ripple Current (mA) @ 100kHz/105 | Max. Leakage Current (A) @ 100kHz/20 | Max. Impedance () @ 100kHz/20 | Operating Temperature (C) | Case Size (D*L mm) | Endurance (Hrs) @ 105 | Lead Treatment | Special |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KF221M050G160ECA | 220 | -20~20 | 50 | 58 | 9 | 930 | 110 | 0.096 | -40~105 | 10X16 | 5000 | C4.5 | PET Sleeve |
Detailed Technical Data
| Item | Conditions & Criterion |
|---|---|
| Operating Temperature Range | -40~105 (C) |
| Capacitance | Conditions: Temp: 202C, Frequency: 120Hz, Voltage: 0.5Vrms Criterion: Tolerance: -20~20% |
| Dissipation Factor (tan) | Conditions: Temp: 202C, Frequency: 120Hz, Voltage: 0.5Vrms Criterion: See Table 1 |
| Leakage Current | Conditions: Rated voltage applied across capacitors and 100010% protective resistor for 2 min. Criterion: I 110 (A) |
| Terminal Strength (Tensile) | Refer to datasheet for specific loads based on wire diameter. Criterion: Terminal should not be loose, breakage, or bad connection. |
| Terminal Strength (Bending) | Refer to datasheet for specific loads based on wire diameter. Criterion: Terminal should not be loose, breakage, or bad connection. |
| High Temperature Load | Conditions: Temp: 105C, Applied Voltage: Rated DC working voltage, Test Time: 5000 H Criterion: Capacitance Change: 20%, DF: 200% of initial, LC: initial, Appearance: No visible damage. |
| High Temperature Exposure (Storage) | Conditions: Temp: 105C, Applied Voltage: None, Test Time: 1000H Criterion: Capacitance Change: 20%, DF: 200% of initial, LC: initial, Appearance: No visible damage. |
| Surge Test | Conditions: Temp: 15~35C, Applied Voltage: 58V, Period: 30s charge, 330s discharge, Cycles: 1000 Criterion: Capacitance Change: 15%, DF: initial, LC: initial, Appearance: No visible damage. |
| Vibration | Conditions: Frequency: 10~55Hz, Amplitude: 0.75mm, Acceleration: 98 m/s (10g), Time: 2 Hrs per X,Y,Z direction. Criterion: Capacitance Change: 5%, DF: initial, LC: initial, Appearance: No visible damage. |
| Solderability | Conditions: Solder: Sn:96.5%, Ag:3%, Cu:0.5%, Temp: 2455C, Time: 2.00.5s. Criterion: New solder coverage > 95%. |
| Resistance to Soldering Heat | Conditions: Solder: Sn:96.5%, Ag:3%, Cu:0.5%, Temp: 2600~3C, Time: 101s. Criterion: Capacitance Change: 5%, DF: initial, LC: initial. |
| Vent Test (for products with vent) | Conditions: Refer to datasheet for voltage and size criteria. Criterion: No explosion, flash, flame, spark, or fire when vent operates. |
| Temperature Cycling | Conditions: 10 cycles as per JIS-C-5101-1 (2010) No:4.16. Criterion: Capacitance Change: 5%, DF: initial, LC: initial, Appearance: No visible damage. |
| High Temp and Humidity | Conditions: Temp: 402C, Humidity: 90~95%RH, Time: 500H. Criterion: Capacitance Change: 10%, DF: 1.2 times initial, LC: initial, Appearance: No visible damage. |
Marking
Example:
- CapXon: Brand
- 50V: Rated Voltage
- 220F: Nominal Capacitance
- (-): Polarity (Cathode Indicate)
- 105C: Maximum Operating Temperature
- KF: Series
- P1502: Date Code (15: Year 2015; 02: Week 2)
- VENT: Safety Vent
Front: KF 105C P1502 VENT
Back: CapXon 220uF 50V
Characteristics Tables
Table 1: Dissipation Factor (DF) (%) max.
| Rated Voltage (VDC) | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 100 |
|---|---|---|---|---|---|---|---|---|
| D.F. (%)max. | 18 | 16 | 14 | 12 | 10 | 9 | 8 | 8 |
| Rated Voltage (VDC) | 160 | 200 | 250 | 350 | 400 | 420 | 450 |
|---|---|---|---|---|---|---|---|
| D.F. (%)max. | 12 | 12 | 12 | 15 | 15 | 17 | 17 |
For capacitance >1000F, add 2% per another 1000F.
Table 2: Impedance Ratio max
| Rated Voltage (VDC) | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 100 |
|---|---|---|---|---|---|---|---|---|
| Z-25Z+20 | 4 | 3 | 3 | 3 | 3 | 3 | 2 | 2 |
| Z-40Z+20 | 8 | 6 | 4 | 3 | 3 | 3 | 3 | 3 |
| Rated Voltage (VDC) | 160 | 200 | 250 | 350 | 400 | 450 | |
|---|---|---|---|---|---|---|---|
| Z-25Z+20 | 2 | 2 | 3 | 5 | 5 | 6 | - |
| Z-40Z+20 | 3 | 6 | 6 | 6 | 6 | - | - |
For capacitance >1000F, add 0.5 per another 1000F for -25/+20; add 1 per another 1000F for -40/+20.
Table 3: Multiplier for Ripple Current vs. Frequency
| CAP(F)Frequency(Hz) | 50(60) | 120 | 400 | 1K | 10K | 50K~100K |
|---|---|---|---|---|---|---|
| CAP10 | 0.47 | 0.59 | 0.76 | 0.85 | 0.97 | 1.0 |
| 10CAP100 | 0.52 | 0.62 | 0.80 | 0.89 | 0.97 | 1.0 |
| 100CAP1000 | 0.58 | 0.72 | 0.84 | 0.90 | 0.98 | 1.0 |
| 1000CAP | 0.63 | 0.78 | 0.87 | 0.91 | 0.98 | 1.0 |
Notes:
- Specification and description for the component(s) are subject to change without notice.
- Operation conditions (ambient temperature, ripple current, thermal resistance, etc.) may affect the lifetime of a capacitor; please consult Capxon for lifetime calculation in your application.
- For aerospace or military application and for life-saving or life-sustaining applications, please consult us before design-in in your application.
- Under no circumstance, Capxon warrants that any Capxon product is suitable for the purposes intended for your application, even if Capxon knows the application. It is the buyers duty and obligation to check and make sure that Capxons products are suitable for the purposes intended and select the correct and proper Capxon product.
- Except for the written express warranties, Capxon DO NOT, impliedly, by assumption or otherwise, warrant, undertake, or promise any other warranty or guarantee for Capxons Products.
- Further information please read our technical information on our website: www.capxongroup.com.
1811091226_CapXon-KF221M050G160ECA_C244342.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
