<
>
Specifications
Operating Temperature:
-40℃~+105℃
Lifetime:
-
Capacitance:
10uF
Height - Seated (Max):
16mm
Pin Spacing:
5mm
Voltage Rating:
250V
Diameter:
10mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
320mA@100kHz
Mfr. Part #:
RC250M100LO10*16D-1A3C
Package:
Through Hole,D10xL16mm
Key Attributes
Model Number:
RC250M100LO10*16D-1A3C
Product Description
Product Overview
The RC Series Miniature Aluminum Electrolytic Capacitors are designed for high-performance applications, featuring low impedance and high ripple current capabilities. These capacitors are particularly well-suited for use in switching power supplies. They are RoHS 2.0 compliant, ensuring adherence to environmental standards.
Product Attributes
- Series: RC Series
- Type: Miniature Aluminum Electrolytic Capacitors
- Compliance: RoHS 2.0 Compliant
Technical Specifications
| Category | Characteristic | Value |
|---|---|---|
| Category Temperature Range | Operating Temperature Range | -40 ~ +105 |
| Rated Voltage Range | 6.3 ~ 450V.DC | |
| Capacitance Tolerance | (at 20, 120Hz) | 20%(M) |
| Leakage Current | (After 2 minute application of rated voltage, at 20) I 0.01CV or 3A, whichever is greater | |
| (After 2 minute application of rated voltage, at 20) I 0.02CV + 10(A) | ||
| Dissipation Factor (tan) | Rated Voltage (V) | 6.3 |
| 10 | ||
| 16 | ||
| 25 | ||
| 35 | ||
| 50 | ||
| 63 | ||
| 100 | ||
| 160 | ||
| 200 | ||
| 250 | ||
| 350 | ||
| 400 | ||
| 450 | ||
| tan (Max.) | 0.22, 0.19, 0.16, 0.14, 0.12, 0.10, 0.09, 0.08, 0.15, 0.15, 0.15, 0.2, 0.2, 0.2 | |
| Note on tan | When nominal capacitance exceeds 1000 F, add 0.02 to the value above for each 1000 F increase. (at 20, 120Hz) | |
| Low Temperature Characteristics | (at 120Hz) Impedance Ratio (Max.) | |
| Rated Voltage (V) | 6.3, 10, 16, 25, 35, 50, 63, 100, 160, 200, 250, 350, 400, 450 | |
| Z(-25)/Z(+20) | 4, 3, 3, 3, 3, 2, 2, 2, 3, 5, 6, -, -, - | |
| Z(-40)/Z(+20) | 8, 6, 4, 4, 4, 4, 4, 4, 4, 7, 8, -, -, - | |
| Endurance (at 105) | Load Life | 6.3~100V: 2000h (5~8), 3000h (10); 160~450V: 3000h (6.3), 5000h (8) |
| Capacitance Change | 20% of the initial value | |
| D.F.(tan) | 200% of the initial specified value | |
| Leakage Current | The initial specified value | |
| Shelf Life (at 105, without voltage) | Capacitance Change | 20% of the initial value |
| D.F.(tan) | 200% of the initial specified value | |
| Leakage Current | 200% of the initial specified value | |
| Dimensions | D (mm) | 5, 6.3, 8, 10, 13, 16, 18 |
| F (mm) | 2.0, 2.5, 3.5, 5.0, 5.0, 7.5, 7.5 | |
| d (mm) | 0.5, 0.5, 0.5/0.6, 0.6, 0.6, 0.8, 0.8 | |
| (mm) | (L<20)1.5, (L20)2.0 | |
| Safety Vent | (8 up) | |
| Lead Wire | Tinned copper-ply wire | |
| Sleeve | Vinyl sleeve | |
| End Seal | Rubber | |
| Dimensions | L (mm) | 0.5min. |
| D 0.5 (mm) | ||
| F 0.5 (mm) | ||
| Rated Ripple Current Coefficient | Frequency Coefficient (120Hz, 1K, 10K, 100K) | 4.7F: 0.42, 0.70, 0.90, 1.00; 5.6 ~ 33F: 0.50, 0.73, 0.92, 1.00; 34 ~ 330F: 0.55, 0.77, 0.94, 1.00; 331 ~ 1,000F: 0.60, 0.80, 0.96, 1.00; >1,000F: 0.70, 0.85, 0.98, 1.00 |
Standard Ratings Table (Partial Example)
| WV (Vdc) | Cap. (F) | Case Size DL (mm) | Impedance () Max. 20 /100kHz | Rated ripple current (mArms) 105 /100KHz |
|---|---|---|---|---|
| 6.3 | 33 | 511 | 1.0 | 100 |
| 10 | 47 | 511 | 1.0 | 125 |
| 16 | 10,000 | 1840 | 0.015 | 3,810 |
| 25 | 4.7 | 511 | 2.8 | 80 |
| 35 | 6.8 | 511 | 2.8 | 120 |
| 50 | 68 | 812 | 0.630 | 330 |
| 63 | 0.47 | 511 | 6.0 | 68 |
| 100 | 0.47 | 511 | 8.0 | 68 |
| 160 | 10 | 10X16 | 320 | 320 |
| 200 | 6.8 | 812 | 204 | 204 |
| 250 | 4.7 | 812 | 160 | 160 |
| 350 | 5 | 10X12.5 | 150 | 150 |
| 400 | 1 | 812 | 60 | 60 |
| 450 | 2.2 | 812 | 105 | 105 |
Note: The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced.
2410121236_BERYL-Electronic-Tech-RC250M100LO10-16D-1A3C_C2837967.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
