86--15347289033
feliciazhou@pa.ecer.com
Online Service

Online Service

Contact Person
feliciazhou@pa.ecer.com
8615347289033
+86 136 6733 2386
quality Miniature Aluminum Electrolytic Capacitors BERYL Electronic Tech RF010M821LO8*12TA-1A1Et with RoHS2 Compliant and Long Lifespan factory
<
quality Miniature Aluminum Electrolytic Capacitors BERYL Electronic Tech RF010M821LO8*12TA-1A1Et with RoHS2 Compliant and Long Lifespan factory
>
Specifications
Lifetime:
5000hrs@105℃
Capacitance:
820uF
Height - Seated (Max):
12mm
Voltage Rating:
10V
Diameter:
8mm
Tolerance:
±20%
Mfr. Part #:
RF010M821LO8*12TA-1A1Et
Package:
Through Hole,D8xL12mm
Key Attributes
Model Number: RF010M821LO8*12TA-1A1Et
Product Description

Product Overview

The RF Series Miniature Aluminum Electrolytic Capacitors are designed for power supply output applications, offering low impedance and a downsized form factor. These capacitors operate at 105 with a lifespan of 4000 to 8000 hours and are RoHS2.0 compliant. They are suitable for applications requiring reliable performance under demanding conditions.

Product Attributes

  • Series: RF Series
  • Type: Miniature Aluminum Electrolytic Capacitors
  • Features: Low impedance, downsized
  • Temperature Rating: 105
  • Lifespan: 4000~8000 hours (at 105)
  • Compliance: RoHS2.0 Compliant
  • Safety Vent: Included (8mm and up)
  • Construction: Tinned copper-ply wire, Vinyl sleeve, Rubber end seal

Technical Specifications

General Characteristics

Item Characteristic Parameter Value
Category Temperature Range -40 ~ +105
Rated Voltage Range 6.3 ~ 100V.DC
Capacitance Tolerance (at 20, 120Hz) 20%(M)
Leakage Current (at 20, after 2 min. application of rated voltage) I 0.01CV or 3A, whichever is greater
(Note: I=Max.leakage current (A), C=Nominal capacitance(F), V=Rated voltage(V))

Dissipation Factor (tan) Max. (at 20, 120Hz)

Rated Voltage (Vdc) 6.3 10 16 25 35 50 63 80 100
tan (Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08 0.08

Note: When nominal capacitance exceeds 1000 F, add 0.02 to the value above for each 1000 F increase.

Low Temperature Characteristics (Impedance Ratio)

Rated Voltage (V) 6.3 10 16 25 35 50 63 80 100
Z(-25)/Z(+20) (Max.) 2 2 2 2 2 2 2 2 2
Z(-40)/Z(+20) (Max.) 3 3 3 3 3 3 3 3 3

Endurance (at 105)

Parameter Requirement Duration (hrs)
Capacitance Change 25% of initial value 5~6.3: 4000
8~10: 5000
13: 7000
16: 8000
D.F. (tan) 200% of initial specified value
Leakage Current Initial specified value

Note: Specifications shall be satisfied when capacitors are restored to 20 after applied within maximum allowable ripple current and not over rated voltage range for the specified time at 105.

Shelf Life (at 105, no voltage applied)

Parameter Requirement Duration (hrs)
Capacitance Change 25% of initial value 500
D.F. (tan) 200% of initial specified value
Leakage Current 200% of initial specified value

Note: Specifications shall be satisfied when capacitors are restored to 20 after exposing them for 500 hours at 105 without voltage applied.

Dimensions (Unit: mm)

D 5 6.3 8 10 13 16 18
F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
d 0.5 0.5 0.5/0.6 0.6 0.6 0.8 0.8
(L<20) 1.5 2.0
L .5min.
D 0.5
F 0.5

Rated Ripple Current Coefficient (Frequency Coefficient)

Frequency (Hz) 120 1k 10k 100k
Capacitance (F) 6.8~180 0.40 0.75 0.90 1.00
Capacitance (F) 220~560 0.50 0.85 0.94 1.00
Capacitance (F) 680~1,800 0.60 0.87 0.95 1.00
Capacitance (F) 2,200~3,900 0.75 0.90 0.95 1.00
Capacitance (F) 4,700 ~ 0.85 0.95 0.98 1.00

Standard Ratings

WV(V) Cap. (F) Case size DL (mm) Impedance () Max. 20/100kHz Rated ripple current (mArms) 105/100KHz
6.3 150 5x11 0.30 250
6.3 330 6.3x11 0.13 405
6.3 560 8x12 0.072 760
6.3 820 8x16 0.056 995
6.3 1,000 10x13 0.053 1,030
6.3 1,200 8x20 0.041 1,250
6.3 1,200 10x16 0.038 1,430
6.3 1,500 10x20 0.023 1,820
6.3 2,200 10x25 0.022 2,150
6.3 3,300 13x20 0.021 2,360
6.3 3,900 13x25 0.018 2,770
6.3 4,700 13x30 0.16 3,290
6.3 5,600 13x35 0.015 3,400
6.3 5,600 16x21 0.018 3,140
6.3 6,800 16x26 0.016 3,460
10 100 5x11 0.30 250
10 220 6.3x11 0.13 405
10 470 8x12 0.072 760
10 680 8x16 0.056 995
10 680 10x13 0.053 1,030
10 1,000 8x20 0.041 1,250
10 1,000 10x16 0.038 1,430
10 1,200 10x20 0.023 1,820
10 1,500 10x25 0.022 2,150
10 2,200 13x20 0.021 2,360
10 3,300 13x25 0.018 2,770
10 3,900 13x30 0.16 3,290
10 3,900 16x21 0.018 3,140
10 4,700 13x35 0.015 3,400
10 5,600 16x26 0.016 3,460
16 56 5x11 0.30 250
16 120 6.3x11 0.13 405
16 330 8x12 0.072 760
16 470 8x16 0.056 995
16 470 10x13 0.053 1,030
16 680 8x20 0.041 1,250
16 680 10x16 0.038 1,430
16 820 10x20 0.035 1,550
16 1,000 10x20 0.023 1,820
16 1,200 10x25 0.022 2,150
16 1,500 13x20 0.021 2,360
16 2,200 13x25 0.018 2,770
16 2,700 13x30 0.016 3,290
16 2,700 16x21 0.018 3,140
16 3,300 13x35 0.015 3,400
16 3,900 16x26 0.016 3,460
25 47 5x11 0.30 250
25 100 6.3x11 0.13 405
25 220 8x12 0.072 760
25 330 8x16 0.056 995
25 330 10x13 0.053 1,030
25 470 8x20 0.041 1,250
25 470 10x16 0.038 1,430
25 680 10x20 0.023 1,820
25 820 10x25 0.022 2,150
25 1,000 13x20 0.021 2,360
25 1,500 13x25 0.018 2,770
25 1,800 13x30 0.016 3,290
25 1,800 16x21 0.018 3,140
25 2,200 13x35 0.015 3,400
25 2,700 16x26 0.016 3,460
35 33 5x11 0.30 250
35 56 6.3x11 0.13 405
35 150 8x12 0.072 760
35 220 8x16 0.056 995
35 220 10x13 0.053 1,030
35 330 8x20 0.041 1,250
35 330 10x16 0.038 1,430
35 470 10x20 0.023 1,820
35 560 10x25 0.022 2,150
35 680 13x20 0.021 2,360
35 820 13x25 0.018 2,770
35 1,000 13x30 0.016 3,290
35 1,000 16x21 0.018 3,140
35 1,200 13x35 0.015 3,400
35 1,500 16x26 0.016 3,460
50 22 5x11 0.30 250
50 56 6.3x11 0.13 405
50 120 8x12 0.072 760
50 180 8x16 0.056 995
50 180 10x13 0.053 1,030
50 270 8x20 0.041 1,250
50 270 10x16 0.038 1,430
50 390 10x20 0.023 1,820
50 470 10x25 0.022 2,150
50 560 13x20 0.021 2,360
50 680 13x25 0.018 2,770
50 820 13x30 0.016 3,290
50 820 16x21 0.018 3,140
50 1,000 13x35 0.015 3,400
50 1,200 16x26 0.016 3,460
63 15 5x11 0.30 250
63 33 6.3x11 0.13 405
63 56 8x12 0.072 760
63 82 8x16 0.056 995
63 82 10x13 0.053 1,030
63 120 8x20 0.041 1,250
63 120 10x16 0.038 1,430
63 150 10x20 0.023 1,820
63 180 10x25 0.022 2,150
63 220 13x20 0.021 2,360
63 270 13x25 0.018 2,770
63 330 13x30 0.016 3,290
63 390 10x20 0.085 3,290
63 390 16x21 0.018 3,140
63 470 13x35 0.015 3,400
63 560 13x30 0.078 2,800
80 68 10x13 0.053 1,030
80 100 10x16 0.038 1,430
80 120 10x20 0.023 1,820
80 150 10x25 0.022 2,150
80 180 13x20 0.021 2,360
80 220 13x25 0.018 2,770
80 270 13x30 0.016 3,290
80 330 13x35 0.015 3,400
80 390 16x26 0.016 3,460
100 6.8 5x11 1.4 125
100 15 6.3x11 0.57 205
100 27 8x12 0.36 355
100 39 8x16 0.25 450
100 47 10x13 0.17 480
100 68 8x20 0.041 1,250
100 68 10x16 0.038 1,430
100 82 10x20 0.023 1,820
100 100 10x25 0.022 2,150
100 120 13x20 0.021 2,360
100 150 13x25 0.018 2,770
100 180 13x30 0.016 3,290
100 220 13x35 0.015 3,400
100 270 16x26 0.016 3,460

Note: The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the RMS ripple current has to be reduced.


2410121308_BERYL-Electronic-Tech-RF010M821LO8-12TA-1A1Et_C7436427.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max