<
>
Specifications
Capacitance:
100uF
Height - Seated (Max):
11mm
Voltage Rating:
25V
Diameter:
6.3mm
Tolerance:
±20%
Mfr. Part #:
RC025M101LO6.3*11TH-2A1Et
Package:
Through Hole,D6.3xL11mm
Key Attributes
Model Number:
RC025M101LO6.3*11TH-2A1Et
Product Description
Product Overview
The BERYL RC Series are radial aluminum electrolytic capacitors designed for use in electronic equipment. These capacitors meet IEC 60384 standards and are suitable for applications requiring reliable performance up to 105C. They offer a capacitance of 100F with a rated voltage of 25V, featuring a capacitance tolerance of 20% and a life expectancy of 2000 hours at 105C.
Product Attributes
- Brand: BERYL
- Series: RC
- Type: Radial
- Construction Material: Lead (Al and (Fe+Cu+Sn)), Rubber (IIR), Case (Aluminum), Paper (Wood / Fibrous plant materials), Anode foil (Al + Al2O3), Cathode foil (Aluminum), Electrolyte (Glycol + Water +Ammonium salt), Sleeve (PET), Adhesive tape (propylene, butyl acrylate)
- Sleeve Color: PET
- Compliance: Meets IEC 60384 standards
Technical Specifications
| Series | Capacitance (uF) | Rated Voltage (WV) | Size (mm) (D x L) | Temperature Range (C) | Capacitance Tolerance | Life (hours) @105C | Dissipation Factor (DF) (%) MAX @120Hz/20C | Leakage Current (LC) (A) MAX (2min/20C) | ESR () MAX @100KHz/25C | Ripple Current (mA rms) MAX @105C/100KHz | Surge Voltage (V) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RC | 100 | 25 | 6.3 x 11 | -40~+105 | 20% | 2000 | 14 | 25 | 0.52 | 220 | 29 |
| Type | D (mm) | P (mm) | d (mm) | a (mm) (L<20) | a (mm) (L20) |
|---|---|---|---|---|---|
| 5 | 5 | 2 | 0.5 | 1.5 | 2.0 |
| 6.3 | 6.3 | 2.5 | 0.5 | 1.5 | 2.0 |
| 8 | 8 | 3.5 | 0.5/0.6 | 1.5 | 2.0 |
| 10 | 10 | 5 | 0.6 | 1.5 | 2.0 |
| 13 | 13 | 5 | 0.6 | 1.5 | 2.0 |
| 16 | 16 | 7.5 | 0.8 | 1.5 | 2.0 |
| 18 | 18 | 7.5 | 0.8 | 1.5 | 2.0 |
| 22 | 22 | 10 | 0.8 | 1.5 | 2.0 |
| Part Number Component | Description |
|---|---|
| RC | Series Name |
| 025 | Rated Voltage (25V) |
| M | Capacitance Tolerance (20%) |
| 101 | Rated Capacitance (101=100uF) |
| LO | Lead Type (Long Lead) |
| 6.3*11 | Size (D*L) |
| TH | Sleeve Material Code |
| 2A1 | Other |
| E | Sleeve Material (PET) |
| t | Date Code (week) |
| Marking Item | Details |
|---|---|
| 1) | Trademark (BERYL) |
| 2) | Working voltage (25V) |
| 3) | Nominal capacitance (100uF) |
| 4) | Cathode marked |
| 5) | Series symbol & Nominal capacitance tolerance (M: -20% ~ +20%) |
| 6) | Sleeve material (EPET) |
| 7) | Maximum operating temperature (105) |
| 8) | Date code (2417) (24: Year 2024, 17: Week) |
| Performance Test Item | Condition | Criteria |
|---|---|---|
| Nominal capacitance | 120Hz12Hz, 0.5Vrms +1.5~2.0V.DC, 202 | Within specified capacitance tolerance. |
| Leakage current | Connected with 1k10 series resistor for 2 minutes. | 0.01CV or 3 A, whichever is greater. |
| Dissipation factor | Nominal capacitance, specified frequency, voltage and temperature. | Must be within the parameters. |
| Impedance | 100kHz, 202, 2mm max. from sealing rubber. | Must be within the parameters. |
| Load life test | Max operating temp 2C, rated DC bias voltage + rated ripple current for rated life +48/0 hours. Recover 16 hours. | Leakage current: Not more than specified. Capacitance Change: Within 20% of initial. Dissipation Factor: Not more than 200% of specified. Appearance: No electrolyte leakage. |
| Shelf life test | No voltage applied, Max operating temp 2C for 1000+48/0 hours. Stabilize 16 hours. | Leakage current: Not more than 200% of specified. Capacitance Change: Within 20% of initial. Dissipation Factor: Not more than 200% of specified. Appearance: No electrolyte leakage. |
| Maximum permissible ripple current, temperature coefficient | 100KHz, Max operating temperature. | See Table-3 for frequency multipliers. Temperature coefficient factors provided. |
| Terminal strength | Tensile and bending forces applied to terminals. | No noticeable changes, breakage, or looseness at the terminal. |
| Temperature characteristics | Tests at 202, -40, 1052. Capacitance, DF, impedance measured at 120Hz. | See detailed criteria for capacitance change, DF, leakage current, and impedance ratio at -40. |
| Surge test | Surge voltage applied with series resistor for 305 seconds, repeated 1000 times. Recover 1-2 hours. | Leakage current: Not more than specified. Capacitance Change: Within 15% of initial. Dissipation Factor: Not more than specified. Appearance: No electrolyte leakage. |
| Change of temperature test | Temperature cycle: +20 (3 min), -40 (-25) (302 min), +105 (302 min). Total 5 cycles. | Leakage current: Not more than specified. Dissipation Factor: Not more than specified. Appearance: No electrolyte leakage. |
| Damp heat test | 90~95% RH, 402 for 5008 hours. | Leakage current: Not more than specified. Capacitance Change: Within 10% of initial. Dissipation Factor: Not more than 120% of specified. Appearance: No electrolyte leakage. |
| Solderability test | Soldering temp: 2455, Dipping depth: 2mm, Speed: 252.5mm/s, Time: 30.5s. | Soldering wetting time: Less than 3s. Coating quality: Min 95% of immersed surface. |
| Vibration test | 10Hz ~ 55Hz, peak amplitude 1.5mm, 2 hours per direction. | Inner construction: No intermittent contacts, open/short circuit. No damage to terminals/electrodes. Appearance: No mechanical damage, electrolyte leakage, or case swelling. Markings legible. |
| Resistance to solder heat test | Solder bath: 2605 for 101s OR 40010 for 10.1s, 1.5~2.0 mm from body. Recover 1-2 hours. | Leakage current: Not more than specified. Capacitance Change: Within 5% of initial. Dissipation Factor: Not more than specified. Appearance: No electrolyte leakage. |
| Vent test | Applies to vented products (diameter 6.3). Reversed polarity DC test with current from Table 2. | Vent operates with no dangerous conditions (flames, dispersion of pieces). |
Packing Information
Packing Label Marked: Clint order number, Client part number, Beryl part number, Capacitance, Voltage, Dimension, Packaging quantity, Capacitance tolerance, QC Marking, Lot number, Series.
Packing Types: Bulk Packing, Taped Packing.
Prohibition to Use Environment- related Substances
This product is warranted to be free from the following substances as per RoHS or Sony-SS-00259:
- Cadmium and cadmium compounds
- Lead and lead compounds
- Mercury and mercury compounds
- Hexavalent chromium compounds
- Organic chlorin compounds (PCB, PCN, PCT, Chlorinated paraffins, Other chlorinated organic compounds)
- Organic bromine compounds (PBB, PBDE, Other brominated organic compounds)
- Tributyltin compounds
- Triphenyltin compounds
- Asbestos
- Specific azo compounds
- Formaldehyde
- Polyvinyl chloride (PVC) and PVC blends
- F, Cl, Br, I (REACH)
2411201851_BERYL-Electronic-Tech-RC025M101LO6-3-11TH-2A1Et_C22388855.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
