<
>
Specifications
Operating Temperature:
-40℃~+105℃
Lifetime:
-
Capacitance:
10uF
Height - Seated (Max):
13mm
Pin Spacing:
5mm
Voltage Rating:
200V
Diameter:
10mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
320mA@100kHz
Mfr. Part #:
RC200M100LO10*13TH-2A1E
Package:
Through Hole,D10xL13mm
Key Attributes
Model Number:
RC200M100LO10*13TH-2A1E
Product Description
Product Overview
The RC Series Miniature Aluminum Electrolytic Capacitors are designed for high-performance applications, featuring low impedance and high ripple current capabilities. These capacitors are ideal for use in switching power supplies and are compliant with RoHS 2.0 standards. They offer a wide operating temperature range and a broad rated voltage range, ensuring reliability and versatility in demanding electronic systems.
Product Attributes
- Series: RC Series
- Type: Miniature Aluminum Electrolytic Capacitors
- Compliance: RoHS 2.0
Technical Specifications
| Category | Specification | Details |
|---|---|---|
| Category Temperature Range | Operating Temperature | -40 ~ +105 |
| Rated Voltage Range | DC Voltage | 6.3 ~ 450V |
| Capacitance Tolerance | 20% (M) (at 20, 120Hz) | |
| Leakage Current | I 0.01CV or 3A (whichever is greater) (After 2 min. of rated voltage) | |
| I 0.02CV + 10(A) (After 2 min. of rated voltage) | Note: I=Max. leakage current (A), C=Nominal capacitance (F), V=Rated voltage (V) (at 20) | |
| Dissipation Factor (tan) (Max.) (at 20, 120Hz) | Rated Voltage: 6.3V | 0.22 |
| Rated Voltage: 10V | 0.19 | |
| Rated Voltage: 16V | 0.16 | |
| Rated Voltage: 25V | 0.14 | |
| Rated Voltage: 35V | 0.12 | |
| Rated Voltage: 50V | 0.10 | |
| Rated Voltage: 63V | 0.09 | |
| Rated Voltage: 100V | 0.08 | |
| Rated Voltage: 160V | 0.15 | |
| Rated Voltage: 200V | 0.15 | |
| Rated Voltage: 250V | 0.15 | |
| Rated Voltage: 350V | 0.2 | |
| Rated Voltage: 400V, 450V | 0.2 | |
| Dissipation Factor Note | For nominal capacitance > 1000F, add 0.02 for each 1000F increase. | |
| Low Temperature Characteristics (at 120Hz) | Z(-25)/Z(+20) (Max. Impedance Ratio) | See table in original document |
| Z(-40)/Z(+20) (Max. Impedance Ratio) | See table in original document | |
| Endurance (at 105) | Load life (DC voltage + ripple current) | 6.3~100V: 2000h (5~8), 3000h (10); 160~450V: 3000h (6.3), 5000h (8) |
| Specifications after test | Capacitance change 20% of initial value; D.F.(tan) 200% of initial specified value; Leakage current Initial specified value | |
| Shelf Life (at 105, no voltage) | Storage duration | 1000 hours |
| Specifications after test | Capacitance change 20% of initial value; D.F.(tan) 200% of initial specified value; Leakage current 200% of initial specified value | |
| Dimensions | Diameter (D) | 5, 6.3, 8, 10, 13, 16, 18 (mm) |
| Dimensions | Lead Spacing (F) | 2.0, 2.5, 3.5, 5.0, 7.5 (mm) |
| Dimensions | Lead Diameter (d) | 0.5, 0.6, 0.8 (mm) |
| Dimensions | Length (L) | See Standard Ratings table |
| Dimensions | Lead Pitch () | 1.5 (L<20), 2.0 (L20) (mm) |
| Safety Vent | Included for 8 and larger | |
| Construction | Tinned copper-ply wire, end seal, vinyl sleeve, rubber | |
| Standard Ratings | WV(Vdc), Cap.(F), Case Size (DL mm), Impedance ( Max. 20/100kHz), Rated ripple current (mArms) 105/100KHz | See tables in original document |
| Ripple Current Coefficient | Frequency Coefficient | See table in original document |
Note: Endurance of aluminum electrolytic capacitors is reduced by internal heating from ripple current. For extended life, reduce RMS ripple current during operation.
2410121236_BERYL-Electronic-Tech-RC200M100LO10-13TH-2A1E_C2837957.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
