<
>
Specifications
Operating Temperature:
-40℃~+105℃
Capacitance:
47uF
Height - Seated (Max):
26mm
Pin Spacing:
7.5mm
Voltage Rating:
450V
Diameter:
16mm
Tolerance:
±20%
Mfr. Part #:
RC450M470LO16*26TH-2A1Et
Package:
Through Hole,D16xL26mm
Key Attributes
Model Number:
RC450M470LO16*26TH-2A1Et
Product Description
Product Overview
This specification applies to Aluminum electrolytic capacitors (foil type) designed for use in electronic equipment. These capacitors meet IEC 60384 standards and are suitable for operation in a wide temperature range of -40C to +105C. They are designed to provide reliable performance in various electronic applications.
Product Attributes
- Brand: BERYL
- Series: RC
- Type: RADIAL
- Origin: CHINA (Zhao Qing Beryl Electronic Technology Co., Ltd.)
- Sleeve Material: PET
- Compliance: Meets IEC 60384
- Environmental Compliance: Free from specified Prohibited Substances as per RoHS or Sony-SS-00259.
Technical Specifications
| Series | Capacitance (uF) | Rated Voltage (WV) | Size (mm) D x L | Temperature (C) | Capacitance Tolerance | Life (hours) @105C | Dissipation Factor (DF) (%) MAX @120Hz/20 | Leakage Current (LC) (A) MAX 2min/20 | ESR () MAX @100KHz/25 | Ripple Current (mA rms) MAX @105/100KHz | Surge Voltage (V) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RC | 47 | 450 | 16 x 26 | -40 ~ +105 | 20% | 5000 | 20 | 433 | - | 1120 | 495 |
Product Dimensions
| Type | D (mm) | P (mm) | d (mm) | a (mm) |
|---|---|---|---|---|
| 5 | 5 | 2 | 0.5 | 1.5 (L<20) / 2.0 (L20) |
| 6.3 | 6.3 | 2.5 | 0.5 | 1.5 (L<20) / 2.0 (L20) |
| 8 | 8 | 3.5 | 0.5/0.6 | 1.5 (L<20) / 2.0 (L20) |
| 10 | 10 | 5 | 0.6 | 1.5 (L<20) / 2.0 (L20) |
| 13 | 13 | 5 | 0.6 | 1.5 (L<20) / 2.0 (L20) |
| 16 | 16 | 7.5 | 0.8 | 1.5 (L<20) / 2.0 (L20) |
| 18 | 18 | 7.5 | 0.8 | 1.5 (L<20) / 2.0 (L20) |
| 22 | 22 | 10 | 0.8 | 1.5 (L<20) / 2.0 (L20) |
Part Number Breakdown
RC 450 M 470 LO 16*26 TH-2A1 E t
- Series Name: RC
- Rated Voltage: 450 = 450V
- Capacitance Tolerance: M = 20%
- Rated Capacitance: 470 = 47uF
- Description: LO = Long Lead
- Size: 16*26 = 16mm x 26mm
- Material Code: TH (refer to Construction section for details)
- Sleeve Material: E = PET
- Date Code: t = date code (week)
Construction Materials
| Material Name | Composition | Supplier Name |
|---|---|---|
| Lead | Al and (Fe+Cu+Sn) | NMJX |
| Rubber | EPT / IIR | LHXLATHLM2 |
| Case | Aluminum | OXYJHLLY2 |
| Paper | Wood / Fibrous plant materials | KEDF |
| Anode foil | Al + Al2O3 | HY1HY2HFHY3 LDFQ |
| Cathode foil | Aluminum | GYLY1 |
| Electrolyte | Glycol + Water +Ammonium salt | XZBLM1JZ2FS |
| Sleeve | PET | YLCY |
Product Marking
Marking Sample: Front: 450V 47uF RC(M) E105 2216 | Reverse: BERYL
- Trademark: BERYL
- Working Voltage: 450V
- Nominal Capacitance: 47uF
- Series Symbol & Nominal Capacitance Tolerance: M: -20% ~ +20%
- Sleeve Material: E: PET
- Maximum Operating Temperature: 105
- Date Code: 2216 (22: Year 2022, 16: Week)
Performance Characteristics
| Item | Performance | Condition | Criteria |
|---|---|---|---|
| 1. Nominal Capacitance | Capacitance (Tolerance) | 120Hz12Hz, 0.5Vrms +1.5~2.0V.DC, 202 | Within specified capacitance tolerance |
| 2. Leakage Current | I (A) | Connected with 1k10 resistor for 2 min | 0.02CV +10 (A) |
| 3. Dissipation Factor | DF (%) | Nominal capacitance, specified frequency, voltage and temperature | Within specified parameters |
| 4. Impedance | ESR () | 100kHz, 202, 2mm max. from sealing rubber | Within specified parameters |
| 5. Load Life Test | Various characteristics | Max operating temp 2C, rated DC bias + rated ripple current, Rated life +48/0 hours. Recovered for 16 hours. | Leakage current: Not more than specified. Capacitance Change: Within 20%. Dissipation Factor: Not more than 200% of specified. Appearance: No electrolyte leakage. |
| 6. Shelf Life Test | Various characteristics | Max operating temp 2C, no voltage applied, 1000+48/0 hours. Stabilized for 16 hours. | Leakage current: Not more than 200% of specified. Capacitance Change: Within 20%. Dissipation Factor: Not more than 200% of specified. Appearance: No electrolyte leakage. |
| 7. Maximum Permissible Ripple Current | Ripple Current (mA rms) | 100kHz, Max operating temperature | Refer to Table-3 for frequency multipliers |
| 8. Terminal Strength | Tensile & Bending Strength | Applied force for 305 sec (tensile), 90 bend (bending) | No noticeable changes, breakage, or looseness at terminal |
| 9. Temperature Characteristics | Capacitance, DF, Impedance | -40C, +20C, +105C | See detailed criteria in source document. |
| 10. Surge Test | Various characteristics | Surge voltage applied with series resistor for 305 sec, repeated 1000 times. | Leakage current: Not more than specified. Capacitance Change: Within 15%. Dissipation Factor: Not more than specified. Appearance: No electrolyte leakage. |
| 11. Change of Temperature Test | Various characteristics | Temperature cycle: +20C, -40C, +105C for 5 cycles. | Leakage current: Not more than specified. Dissipation Factor: Not more than specified. Appearance: No electrolyte leakage. |
| 12. Damp Heat Test | Various characteristics | 90~95% RH, 402, 5008 hours. | Leakage current: Not more than specified. Capacitance Change: Within 10%. Dissipation Factor: Not more than 120% of specified. Appearance: No electrolyte leakage. |
| 13. Solderability Test | Soldering wetting & Coating quality | 2455, 2mm depth, 252.5mm/s, 30.5s | Wetting time < 3s, Coating quality 95% |
| 14. Vibration Test | Inner construction & Appearance | 10Hz ~ 55Hz, 1.5mm peak amplitude, 2 hours per direction. | No intermittent contacts, open/short circuit, damage, leakage, or swelling. Markings legible. |
| 15. Resistance to Solder Heat Test | Various characteristics | 2605 for 101 sec OR 40010 for 3+0/-1 sec, 1.5~2.0 mm from body. | Leakage current: Not more than specified. Capacitance Change: Within 5%. Dissipation Factor: Not more than specified. Appearance: No electrolyte leakage. |
| 16. Vent Test | Vent operation | DC test with reversed polarity, specific current applied (Table 2). Applies to products with vent, diameter 6.3mm. | Vent operates with no dangerous conditions (flames, dispersion of pieces). |
Packing Information
Label Marking: Clint order number, Client part number, Beryl part number, Capacitance, Voltage, Dimension, Packaging quantity, Capacitance tolerance, QC Marking, Lot number, Series.
Packing Types: Bulk Packing, Taped Packing.
2410121955_BERYL-Electronic-Tech-RC450M470LO16-26TH-2A1Et_C2987863.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
