Product Overview
This specification sheet details the BERYL RC Series Aluminum Electrolytic Capacitors, foil type, designed for use in electronic equipment. Meeting IEC 60384 standards, these capacitors offer a rated capacitance of 10F and a working voltage of 400V, with a temperature range of -40C to +105C and a life expectancy of 5000 hours at 105C. The series is suitable for applications requiring reliable performance and durability.
Product Attributes
- Brand: BERYL
- Series: RC
- Type: Radial
- Construction Material: Aluminum Case, PET Sleeve
- Compliance: Designed to meet IEC 60384 standards.
- Environmental Compliance: Free from prohibited substances as per RoHS or Sony-SS-00259.
Technical Specifications
| Series | Capacitance (F) | Rated WV (V) | Size (mm) (D x L) | Temperature (C) | Capacitance Tolerance | Life (hours) @105C | DF (%) (MAX) @120Hz/20C | LC (A) (MAX) 2min/20C | ESR () (MAX) @100KHz/25C | Ripple Current (mA rms) (MAX) @105C/100KHz | Surge Voltage (V) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RC | 10 | 400 | 10 x 13 | -40 ~ +105 | 20% | 5000 | 20 | 90 | - | 285 | 440 |
Product Dimensions (mm)
| Type | D | P | d | a (L<20) | a (L20) |
|---|---|---|---|---|---|
| 5 | 2 | 0.5 | 1.5 | 2.0 | |
| 6.3 | 2.5 | 0.5 | |||
| 8 | 3.5 | 0.5/0.6 | |||
| 10 | 5 | 0.6 | |||
| 13 | 5 | 0.6 | |||
| 16 | 7.5 | 0.8 | |||
| 18 | 7.5 | 0.8 | |||
| 22 | 10 | 0.8 |
Part Number Breakdown
RC 400 M 100 LO 10*13 TH-2A1 E t
- RC: Series Name
- 400: Rated Voltage (400V)
- M: Capacitance Tolerance (20%)
- 100: Rated Capacitance (10F)
- LO: Lead Type (Long Lead)
- 10*13: Size (D*L in mm)
- TH: Sleeve Material Code
- -2A1: Other Code
- E: Sleeve Material (PET)
- t: Date Code (Week)
Product Marking
Marking includes: Trademark (BERYL), working voltage (400V), nominal capacitance (10F), cathode mark, series symbol & tolerance (M: -20% ~ +20%), sleeve material (E: PET), maximum operating temperature (105C), and date code (e.g., 2216 for 2022, week 16).
Construction Material Details
| Material Name | Composition | Supplier Name |
|---|---|---|
| Lead | Al and (Fe+Cu+Sn) | NM, JX |
| Rubber | EPT / IIR | LHX, LA, TH, LM2 |
| Case | Aluminum | OX, YJ, HL, LY2 |
| Paper | Wood / Fibrous plant materials | KE, DF |
| Anode foil | Al + Al2O3 | HY1, HY2, HF, HY3, LD, FQ |
| Cathode foil | Aluminum | GY, LY1 |
| Electrolyte | Glycol + Water + Ammonium salt | XZB, LM1, JZ2, FS |
| Sleeve | PET | YL, CY |
Performance Characteristics
| Item | Condition | Criteria |
|---|---|---|
| Nominal capacitance | 120Hz12Hz, 0.5Vrms +1.5~2.0V.DC, 202 | Within specified tolerance |
| Leakage current | Connected with 1k10 resistor for 2 min | I (A) 0.02CV+10(A) |
| Dissipation factor | Nominal capacitance, specified frequency, voltage, temperature | Within parameters (See page 3) |
| Impedance | 100kHz, 202, 2mm max. from sealing rubber | Within parameters (See page 3) |
| Load life test | Max. operating temp. 2C, rated DC bias + ripple current, rated life +48/0 hours | Leakage current: Not more than specified. Capacitance Change: Within 20%. DF: Not more than 200% specified. Appearance: No electrolyte leakage. |
| Shelf life test | Max. operating temp. 2C, no voltage, 1000+48/0 hours | Leakage current: Not more than 200% specified. Capacitance Change: Within 20%. DF: Not more than 200% specified. Appearance: No electrolyte leakage. |
| Maximum permissible ripple current | 100kHz, max. operating temp. | Refer to Table-3 for frequency multipliers. |
| Terminal strength | Tensile and bending force applied to terminals | No noticeable changes, breakage, or looseness. |
| Temperature characteristics | Tests at -40C, +20C, +105C | Capacitance, DF, leakage current, and impedance ratios within specified limits. |
| Surge test | Surge voltage applied with series resistor for 305 sec, repeated 1000 times | Leakage current: Not more than specified. Capacitance Change: Within 15%. DF: Not more than specified. Appearance: No electrolyte leakage. |
| Change of temperature test | Temperature cycle: +20C, -40C, +105C (5 cycles) | Leakage current: Not more than specified. DF: Not more than specified. Appearance: No electrolyte leakage. |
| Damp heat test | 90~95% RH, 402, 5008 hours | Leakage current: Not more than specified. Capacitance Change: Within 10%. DF: Not more than 120% specified. Appearance: No electrolyte leakage. |
| Solderability test | 2455C, 2mm dipping depth, 30.5s | Soldering wetting time: Less than 3s. Coating quality: Min. 95% wetting. |
| Vibration test | 10Hz ~ 55Hz, 1.5mm peak amplitude (2 hours per direction) | No intermittent contacts, open/short circuits, or damage. Markings legible. |
| Resistance to solder heat test | 2605 for 101s or 40010 for 3+0/-1s | Leakage current: Not more than specified. Capacitance Change: Within 5%. DF: Not more than specified. Appearance: No electrolyte leakage. |
| Vent test | DC test with reversed polarity (for diameters 6.3mm with vent) | Vent operates without dangerous conditions. |
Packing Information
Labels on inside boxes/bags include: Client order number, Client part number, Beryl part number, Capacitance, Voltage, Dimension, Packaging quantity, Capacitance tolerance, QC Marking, Lot number. Available in Bulk Packing, Taped Packing, and Outer box.
2410121955_BERYL-Electronic-Tech-RC400M100LO10-13TH-2A1Et_C2987853.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
