Product Overview
The RG Series miniature aluminum electrolytic capacitors are designed for low impedance and downsized applications. They are suitable for power supply outputs and offer a long operational life of 6000 to 10000 hours at 105. These capacitors are RoHS 2.0 compliant.
Product Attributes
- Series: RG Series
- Type: Miniature Aluminum Electrolytic Capacitors
- Compliance: RoHS 2.0 Compliant
- Temperature Range: -40 to +105
- Rated Voltage Range: 6.3V.DC to 100V.DC
- Capacitance Tolerance: 20%(M) at 20, 120Hz
- Leakage Current: I0.01CV or 3A, whichever is greater (after 2 minutes of rated voltage application at 20)
- Dissipation Factor (tan): Varies by rated voltage, with an adjustment for capacitance exceeding 1000F.
- Low Temperature Characteristics: Impedance ratio at -25 and -40 relative to +20 are specified.
- Endurance: 6000~10000 hours at 105, with specified limits for capacitance change, D.F., and leakage current.
- Shelf Life: Specifications after 1000 hours of storage at 105 without voltage.
Technical Specifications
| Item | Specification |
|---|---|
| Category Temperature Range | -40 ~ +105 |
| Rated Voltage Range | 6.3 ~ 100V.DC |
| Capacitance Tolerance | 20%(M) (at 20, 120Hz) |
| Leakage Current (Max.) | I0.01CV or 3A, whichever is greater (after 2 minutes application of rated voltage at 20) |
| Dissipation Factor (tan) Max. (at 20, 120Hz) | 6.3V: 0.22 |
| 10V: 0.19 | |
| 16V: 0.16 | |
| 25V: 0.14 | |
| 35V: 0.12 | |
| 50V: 0.10 | |
| 63V: 0.09 | |
| 80V: 0.09 | |
| 100V: 0.08 | |
| Dissipation Factor Adjustment | For nominal capacitance exceeding 1000F, add 0.02 for each 1000F increase. |
| Low Temperature Characteristics (at 120Hz) | Z(-25)/Z(+20) Max. Impedance Ratio: 4 (6.3V), 3 (10-100V) |
| Z(-40)/Z(+20) Max. Impedance Ratio: 8 (6.3V), 6 (10V), 4 (16V), 3 (25-100V) | |
| Endurance (at 105) | Capacitance change 30% of initial value (6.3-10V), 25% of initial value (16-100V) |
| D.F.(tan) 200% of initial specified value | |
| Leakage current The initial specified value | |
| Endurance Durations | 5~6.3: 6000hrs; 8~10: 8000hrs; 13: 10000hrs |
| Shelf Life (Storage at 105 for 1000 hours, no voltage) | Capacitance change 25% of initial value |
| D.F.(tan) 200% of initial specified value | |
| Leakage current 200% of initial specified value |
DIMENSIONS (Unit:mm)
| D | F | d | (L<20) | (L20) |
|---|---|---|---|---|
| 5 | 2.0 | 0.5 | 1.5 | 2.0 |
| 6.3 | 2.5 | 0.5 | 1.5 | 2.0 |
| 8 | 3.5 | 0.5/0.6 | 1.5 | 2.0 |
| 10 | 5.0 | 0.6 | 1.5 | 2.0 |
| 13 | 5.0 | 0.6 | 1.5 | 2.0 |
| 16 | 7.5 | 0.8 | 1.5 | 2.0 |
| 18 | 7.5 | 0.8 | 1.5 | 2.0 |
Rated Ripple Current Coefficient
Frequency Coefficient
| Frequency(Hz) | 120 | 1k | 10k | 100k |
|---|---|---|---|---|
| Capacitance(F) 22 ~ 180 | 0.40 | 0.75 | 0.90 | 1.00 |
| Capacitance(F) 220 ~ 560 | 0.50 | 0.85 | 0.94 | 1.00 |
| Capacitance(F) 680 ~ 1,800 | 0.60 | 0.87 | 0.95 | 1.00 |
| Capacitance(F) 2,200 ~ 3,900 | 0.75 | 0.90 | 0.95 | 1.00 |
| Capacitance(F) 4,700 ~ | 0.85 | 0.95 | 0.98 | 1.00 |
Standard Ratings
(Due to the extensive nature of the standard ratings table, it is not feasible to include it in full here while adhering to character limits. Please refer to the original document for the complete list of WV(V), Cap. (F), Case size, Impedance ()max., and Maximum allowable ripple current at 105 /100kHz.)
Note on Endurance: The endurance of capacitors is reduced with internal heating produced by ripple current. For every 5 rise in temperature, the lifetime is halved. To ensure long life performance, the RMS ripple current must be reduced during use.
2410121258_BERYL-Electronic-Tech-RG010M102LO8-16TA-1A1E_C2837829.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
