<
>
Specifications
Operating Temperature:
-40℃~+105℃
Lifetime:
-
Capacitance:
1000uF
Height - Seated (Max):
16mm
Pin Spacing:
3.5mm
Voltage Rating:
16V
Diameter:
8mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
RC016M102LO8*16TH-2A1Et
Package:
Through Hole,D8xL16mm
Key Attributes
Model Number:
RC016M102LO8*16TH-2A1Et
Product Description
Product Overview
The Beryl RC series of Aluminum Electrolytic Capacitors (foil type) are designed for use in electronic equipment, meeting IEC 60384 standards. These radial capacitors offer a capacitance of 1000F and a rated voltage of 16V, operating within a temperature range of -40C to +105C. They are engineered for reliability with a rated life of 2000 hours at 105C.
Product Attributes
- Brand: BERYL
- Series: RC
- Type: Radial Aluminum Electrolytic Capacitor (foil type)
- Construction Materials: Anode foil (Al + Al2O3), Cathode foil (Aluminum), Electrolyte (Glycol + Water + Ammonium salt), Sleeve (PET), Lead (Al and (Fe+Cu+Sn))
- Origin: Zhao Qing City, Guangdong, China
- Certifications: Designed capacitors quality meets IEC 60384.
- RoHS/REACH Compliance: Free from specified environment-related substances.
Technical Specifications
| Series | Capacitance (F) | Rated Voltage (V) | Size (mm) D x L | Temperature (C) | Capacitance Tolerance | Life (hours) @105C | Dissipation Factor (%) MAX (120Hz/20) | Leakage Current (A) MAX (2min/20) | ESR () MAX (100KHz/25) | Ripple Current (mA rms) MAX (105/100KHz) | Surge Voltage (V) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RC | 1000 | 16 | 8 x 16 | -40~+105 | 20% | 2000 | 16 | 160 | 0.07 | 920 | 18 |
Product Dimensions
| Type | D (mm) | P (mm) | d (mm) | a (mm) |
|---|---|---|---|---|
| 5 | 5 | 2 | 0.5 | 1.5 (L<20) / 2.0 (L20) |
| 6.3 | 6.3 | 2.5 | 0.5 | 1.5 (L<20) / 2.0 (L20) |
| 8 | 8 | 3.5 | 0.5/0.6 | 1.5 (L<20) / 2.0 (L20) |
| 10 | 10 | 5 | 0.6 | 1.5 (L<20) / 2.0 (L20) |
| 13 | 13 | 5 | 0.6 | 1.5 (L<20) / 2.0 (L20) |
| 16 | 16 | 7.5 | 0.8 | 1.5 (L<20) / 2.0 (L20) |
| 18 | 18 | 7.5 | 0.8 | 1.5 (L<20) / 2.0 (L20) |
| 22 | 22 | 10 | 0.8 | 1.5 (L<20) / 2.0 (L20) |
Part Number Structure
RC 016 M 102 LO 8*16 TH-2 A1 E t
- RC: Series Name
- 016: Rated Voltage (16V)
- M: Capacitance Tolerance (20%)
- 102: Rated Capacitance (1000F)
- LO: Type Code (Long Lead)
- 8*16: Size (Diameter*Length in mm)
- TH: Sleeve Material
- -2A1E: Other codes
- t: Date code (week)
Product Marking
Capacitors are marked with the following items:
- Trademark (BERYL)
- Working voltage (16V)
- Nominal capacitance (1000F)
- Cathode mark
- Series symbol & Nominal capacitance tolerance (M: -20% ~ +20%)
- Sleeve material (E: PET)
- Maximum operating temperature (105)
- Date code (e.g., 2216 for manufactured year 2022, week 16)
Performance Characteristics
| Item | Performance | Condition |
|---|---|---|
| Nominal Capacitance | Within specified tolerance | 120Hz12Hz, 0.5Vrms +1.5~2.0V.DC, 202 |
| Leakage Current | 0.01CV or 3 A, whichever is greater | 1k10 protective resistor, 2 minutes |
| Dissipation Factor | Within parameters (See page 3) | Nominal capacitance, specified frequency, voltage, and temperature |
| Impedance | Within parameters (See page 3) | 100kHz, 202, 2mm max. from sealing rubber |
| Load Life Test | Leakage current: Not more than specified value. Capacitance Change: Within 20% of initial value. Dissipation Factor: Not more than 200% of specified value. Appearance: No electrolyte leakage. | Max operating temp. 2C, DC bias voltage + rated ripple current for Rated life +48/0 hours. Tested after 16 hours recovery. |
| Shelf Life Test | Leakage current: Not more than 200% of specified value. Capacitance Change: Within 20% of initial value. Dissipation Factor: Not more than 200% of specified value. Appearance: No electrolyte leakage. | No voltage applied, Max operating temp. 2C for 1000+48/0 hours. Tested after 16 hours stabilization. |
| Maximum Permissible Ripple Current | Refer to Table-3 for frequency multipliers. | 100kHz, max operating temperature. Combined DC and peak AC voltage shall not exceed rated voltage. |
| Terminal Strength | No noticeable changes, breakage, or looseness. | Tensile and bending tests applied to terminals. |
| Temperature Characteristics | Capacitance change within 25% at +105, 10% at +20 (step 5). DF within limits. Leakage current within limits. Impedance ratio at -40 compared to +20 specified in table. | Tests at 202, -40, +105. Capacitance, DF, Impedance measured at 120Hz. |
| Surge Test | Leakage current: Not more than specified value. Capacitance Change: Within 15% of initial value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. | Surge voltage applied for 305 sec. every 50.5 min for 1000 cycles. Tested after 1-2 hours recovery. |
| Change of Temperature Test | Leakage current: Not more than specified value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. | 5 temperature cycles (-40 to +105). |
| Damp Heat Test | Leakage current: Not more than specified value. Capacitance Change: Within 10% of initial value. Dissipation Factor: Not more than 120% of specified value. Appearance: No electrolyte leakage. | 90~95% RH at 402 for 5008 hours. |
| Solderability Test | Soldering wetting time: Less than 3s. Coating quality: Min 95% of immersed surface. | 2455, 2mm dipping depth, 252.5mm/s dipping speed, 30.5s dipping time. |
| Vibration Test | Inner construction: No intermittent contacts, open or short circuiting. No damage of tab terminals or electrodes. Appearance: No mechanical damage, no electrolyte leakage or swelling. Markings legible. | 10Hz ~ 55Hz, 1.5mm peak amplitude for 2 hours in 3 directions. Mounting with bracket if required. |
| Resistance to Solder Heat Test | Leakage current: Not more than specified value. Capacitance Change: Within 5% of initial value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. | 2605 for 101s or 40010 for 3+0/-1s, 1.5~2.0mm from body. Tested after 1-2 hours recovery. |
| Vent Test | Vent operates with no dangerous conditions (flames, dispersion of pieces). | DC test with reversed polarity and selected current from Table 2. Applicable to products with vent (diameter 6.3mm). |
Packing Information
Labels on inside boxes or bags include:
- Client order number
- Client part number
- Beryl part number
- Capacitance
- Voltage
- Dimension
- Packaging quantity
- Capacitance tolerance
- QC Marking
- Lot number
- Series
Packing types include Bulk Packing, Taped Packing, and Outer box with labels.
Prohibition to Use Environment-related Substances
The company certifies that products are free from Cadmium, Lead, Mercury, Hexavalent chromium compounds, Organic chlorin compounds, Organic bromine compounds, Tributyltin compounds, Triphenyltin compounds, Asbestos, Specific azo compounds, Formaldehyde, Polyvinyl chloride (PVC) and PVC blends, as per RoHS or Sony-SS-00259 standards.
2410121955_BERYL-Electronic-Tech-RC016M102LO8-16TH-2A1Et_C2987888.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
