<
>
Specifications
Lifetime:
5000hrs@105℃
Capacitance:
330uF
Height - Seated (Max):
12mm
Voltage Rating:
10V
Diameter:
6.3mm
Tolerance:
±20%
Mfr. Part #:
RG010M331LO6.3*12TA-1A1Et
Package:
Through Hole,D6.3xL12mm
Key Attributes
Model Number:
RG010M331LO6.3*12TA-1A1Et
Product Description
Product Overview
The RG Series miniature aluminum electrolytic capacitors are designed for low impedance and downsized applications, particularly suitable for power supply outputs. These capacitors operate at 105 and offer a lifespan of 6000 to 10000 hours. They are RoHS 2.0 compliant.
Product Attributes
- Product Line: RG Series
- Type: Miniature Aluminum Electrolytic Capacitors
- Key Features: Low impedance, downsized
- Temperature Rating: 105
- Lifespan: 6000~10000 hours
- Compliance: RoHS 2.0 Compliant
Technical Specifications
| Category | Specification | Details |
|---|---|---|
| Operating Temperature Range | Category Temperature Range | -40 ~ +105 |
| Voltage | Rated Voltage Range | 6.3 ~ 100V.DC |
| Capacitance Tolerance | Capacitance Tolerance | 20%(M) (at 20, 120Hz) |
| Leakage Current | Leakage Current | I0.01CV or 3A, whichever is greater (After 2 minutes application of rated voltage) |
| Dissipation Factor (tan) | Rated voltage(V) 6.3 | 0.22 (Max.) |
| Rated voltage(V) 10 | 0.19 (Max.) | |
| Rated voltage(V) 16 | 0.16 (Max.) | |
| Rated voltage(V) 25 | 0.14 (Max.) | |
| Rated voltage(V) 35 | 0.12 (Max.) | |
| Rated voltage(V) 50 | 0.10 (Max.) | |
| Rated voltage(V) 63 | 0.09 (Max.) | |
| Rated voltage(V) 80 | 0.09 (Max.) | |
| Rated voltage(V) 100 | 0.08 (Max.) | |
| Dissipation Factor Note | For nominal capacitance exceeding 1000F | Add 0.02 to the value above for each 1000F increase. (at 20, 120Hz) |
| Low Temperature Characteristics | Rated voltage(V) 6.3 | Z(-25)/Z(+20): 4 (Max. Impedance Ratio) |
| Rated voltage(V) 6.3 | Z(-40)/Z(+20): 8 (Max. Impedance Ratio) | |
| Rated voltage(V) 10 | Z(-25)/Z(+20): 3 (Max. Impedance Ratio) | |
| Rated voltage(V) 10 | Z(-40)/Z(+20): 6 (Max. Impedance Ratio) | |
| Rated voltage(V) 16 | Z(-25)/Z(+20): 2 (Max. Impedance Ratio) | |
| Rated voltage(V) 16 | Z(-40)/Z(+20): 4 (Max. Impedance Ratio) | |
| Rated voltage(V) 25 | Z(-25)/Z(+20): 2 (Max. Impedance Ratio) | |
| Rated voltage(V) 25 | Z(-40)/Z(+20): 3 (Max. Impedance Ratio) | |
| Rated voltage(V) 35 | Z(-25)/Z(+20): 2 (Max. Impedance Ratio) | |
| Rated voltage(V) 35 | Z(-40)/Z(+20): 3 (Max. Impedance Ratio) | |
| Rated voltage(V) 50 | Z(-25)/Z(+20): 2 (Max. Impedance Ratio) | |
| Rated voltage(V) 50 | Z(-40)/Z(+20): 3 (Max. Impedance Ratio) | |
| Rated voltage(V) 63 | Z(-25)/Z(+20): 2 (Max. Impedance Ratio) | |
| Rated voltage(V) 63 | Z(-40)/Z(+20): 3 (Max. Impedance Ratio) | |
| Rated voltage(V) 80 | Z(-25)/Z(+20): 2 (Max. Impedance Ratio) | |
| Rated voltage(V) 80 | Z(-40)/Z(+20): 3 (Max. Impedance Ratio) | |
| Rated voltage(V) 100 | Z(-25)/Z(+20): 2 (Max. Impedance Ratio) | |
| Rated voltage(V) 100 | Z(-40)/Z(+20): 3 (Max. Impedance Ratio) | |
| Low Temperature Characteristics Note | All values at 120Hz | N/A |
| Endurance (at 105) | Case size 5 ~ 6.3 | 6000 hours |
| Case size 8 ~ 10 | 8000 hours | |
| Case size 13 | 10000 hours | |
| Specifications after endurance test (for rated voltage 6.3~10V) | Capacitance change, D.F.(tan), Leakage current | 30% of initial value, 200% of initial specified value, The initial specified value respectively |
| Specifications after endurance test (for rated voltage 16~100V) | Capacitance change, D.F.(tan), Leakage current | 25% of initial value, 200% of initial specified value, The initial specified value respectively |
| General conditions for Endurance test | Applied within rated voltage range with maximum allowable ripple current. | Capacitors shall satisfy specified requirements after restoration to 20. |
| Shelf Life (105, 1000 hours, no voltage applied) | Capacitance change | 25% of initial value |
| D.F.(tan) | 200% of initial specified value | |
| Leakage current | 200% of initial specified value | |
| Dimensions | Case size (DL) | See Standard Ratings Table |
| Dimensions | D (Diameter) | 5, 6.3, 8, 10, 13, 16, 18 mm |
| Dimensions | L (Length) | See Standard Ratings Table |
| Dimensions | F (Pitch) | 2.0, 2.5, 3.5, 5.0, 7.5 mm |
| Dimensions | d (Lead diameter) | 0.5, 0.6, 0.8 mm |
| Dimensions | (Lead length) | 1.5 mm (L<20), 2.0 mm (L20) |
| Construction | Safety Vent | 8mm and up |
| Construction | Terminal | Tinned copper-ply wire |
| Construction | Marking | Vinyl sleeve |
Standard Ratings Table (Excerpt)
| WV(V) | Cap. (F) | Case size DL (mm) | Impedance (max. 20/100kHz | Maximum allowable ripple current at 105 /100kHz |
|---|---|---|---|---|
| 6.3 | 180 | 5X11 | 0.29 | 340 |
| 6.3 | 390 | 6.3X11 | 0.15 | 540 |
| 10 | 120 | 5X11 | 0.29 | 350 |
| 10 | 330 | 6.3X11 | 0.15 | 540 |
| 25 | 82 | 5X11 | 0.29 | 340 |
| 25 | 150 | 6.3X11 | 0.15 | 540 |
| 50 | 27 | 5X11 | 0.48 | 238 |
| 50 | 56 | 6.3X11 | 0.20 | 385 |
| 100 | 18 | 5X11 | 0.50 | 220 |
| 100 | 33 | 6.3X11 | 0.25 | 350 |
Note on Endurance: The endurance of aluminum electrolytic capacitors is reduced by internal heating caused by ripple current, with the lifetime halving for every 5 rise in temperature. For extended lifespan, the RMS ripple current should be reduced during use.
2410121258_BERYL-Electronic-Tech-RG010M331LO6-3-12TA-1A1Et_C7436429.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
