<
>
Specifications
Operating Temperature:
-40℃~+105℃
Lifetime:
-
Capacitance:
1000uF
Height - Seated (Max):
13mm
Pin Spacing:
5mm
Voltage Rating:
16V
Diameter:
10mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
RC016M102LO10*13TH-2A1Et
Package:
Through Hole,D10xL13mm
Key Attributes
Model Number:
RC016M102LO10*13TH-2A1Et
Product Description
Product Overview
The BERYL RC Series Radial Aluminum Electrolytic Capacitors are designed for use in electronic equipment. These foil-type capacitors meet IEC 60384 standards and offer a capacitance of 1000F with a rated voltage of 16V. They are suitable for operation in a temperature range of -40C to +105C and have a rated life of 3000 hours at 105C.
Product Attributes
- Brand: BERYL
- Series: RC
- Type: RADIAL
- Application: Electronic equipment
- Quality Standard: IEC 60384
- Construction Materials:
- Lead: Al and (Fe+Cu+Sn)
- Rubber: NM, JX, LHX, LA, TH, LM2
- Case: Aluminum
- Paper: Wood / Fibrous plant materials
- Anode foil: Al + Al2O3
- Cathode foil: Aluminum
- Electrolyte: Glycol + Water + Ammonium salt
- Sleeve: PET
- Environment Compliance: Free from substances prohibited by RoHS or Sony-SS-00259 (including Cadmium, Lead, Mercury, Hexavalent chromium, etc.).
Technical Specifications
| Series | Capacitance (F) | Rated Voltage (V) | Size (mm) (D x L) | Temperature (C) | Capacitance Tolerance | Life (hours) @105C | Dissipation Factor (%) MAX (120Hz/20) | Leakage Current (A) MAX (2min/20) | ESR () MAX (100KHz/25) | Ripple Current (mA rms) MAX (105/100KHz) | Surge Voltage (V) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RC | 1000 | 16 | 10 x 13 | -40 ~ +105 | 20% | 3000 | 12 | 160 | 0.068 | 885 | 18 |
Product Dimensions
| Type | D (mm) | P (mm) | d (mm) | a (mm) |
|---|---|---|---|---|
| 5 | 5 | 2 | 0.5 | 1.5 (L< 20) / 2.0 (L20) |
| 6.3 | 6.3 | 2.5 | 0.5 | 1.5 (L< 20) / 2.0 (L20) |
| 8 | 8 | 3.5 | 0.5/0.6 | 1.5 (L< 20) / 2.0 (L20) |
| 10 | 10 | 5 | 0.6 | 1.5 (L< 20) / 2.0 (L20) |
| 13 | 13 | 5 | 0.6 | 1.5 (L< 20) / 2.0 (L20) |
| 16 | 16 | 7.5 | 0.8 | 1.5 (L< 20) / 2.0 (L20) |
| 18 | 18 | 7.5 | 0.8 | 1.5 (L< 20) / 2.0 (L20) |
| 22 | 22 | 10 | 0.8 | 1.5 (L< 20) / 2.0 (L20) |
Part Number Structure
RC 016 M 102 LO 10*13 TH-2A1 E t
- Series Name: RC
- Rated Voltage: 016 = 16V
- Capacitance Tolerance: M = 20%
- Rated Capacitance: 102 = 1000F
- Lead Type: LO = Long Lead
- Size: 10*13 (Diameter*Length in mm)
- Sleeve Material: TH
- Other: 2A1
- Date Code: t = week
Product Marking
Marking Sample: 16V 1000F RC(M) E105 2216
- Trademark: BERYL
- Working Voltage: 16V
- Nominal Capacitance: 1000F
- Cathode Marked: (Implied by standard marking conventions)
- Series Symbol & Nominal Capacitance Tolerance: RC(M) (M: -20% ~ +20%)
- Sleeve Material: E (PET)
- Maximum Operating Temperature: 105
- Date Code: 2216 (22 = Year 2022, 16 = Week 16)
Testing Conditions
Standard Atmospheric Conditions: Ambient temperature: 15C to 35C, Relative humidity: 45% to 85%, Air pressure: 86kPa to 106kPa.
Measurement Conditions: Ambient temperature: 20C 2C, Relative humidity: 60% to 70%, Air pressure: 86kPa to 106kPa.
Performance Characteristics
| Item | Condition | Criteria |
|---|---|---|
| Nominal Capacitance | Measuring Frequency: 120Hz12Hz, Measuring Voltage: Not more than 0.5Vrms +1.5~2.0V.DC, Measuring Temperature: 202 | Shall be within the specified capacitance tolerance. |
| Leakage Current | Connected with a protective resistor (1k10) in series for 2 minutes. I (A) 0.01CV (A) | Leakage current shall not exceed the specified value. |
| Dissipation Factor | Nominal capacitance, for measuring frequency, voltage and temperature. | Must be within the parameters (See page 3). |
| Impedance | Measuring frequency: 100kHz; Measuring temperature: 202; Measuring point: 2mm max. from the surface of a sealing rubber on the lead wire. | Must be within the parameters (See page 3). |
| Load Life Test | According to IEC60384-4 No. 4.13. Stored at Maximum operating temperature 2C with DC bias voltage plus rated ripple current for Rated life +48/0 hours. Recovering time: 16 hours. | Leakage current: Not more than specified value. Capacitance Change: Within 20% of initial value. Dissipation Factor: Not more than 200% of specified value. Appearance: No electrolyte leakage. |
| Shelf Life Test | Stored with no voltage applied at Maximum operating temperature 2C for 1000+48/0 hours. Stabilized at room temperature for 16 hours. | Leakage current: Not more than 200% of specified value. Capacitance Change: Within 20% of initial value. Dissipation Factor: Not more than 200% of specified value. Appearance: No electrolyte leakage. |
| Maximum Permissible Ripple Current | Maximum A.C current at 100kHz and can be applied at maximum operating temperature. | (See Table-3 for Frequency Multipliers). |
| Terminal Strength | Tensile and bending strength tests applied to terminals. | No noticeable changes, breakage, or looseness at the terminal. |
| Temperature Characteristics | Step testing at various temperatures (-40C, +20C, +105C). Capacitance, DF, and impedance measured at 120Hz. |
|
| Surge Test | Applied surge voltage with a resistor (100 50)/CR (k) in series for 305 seconds, repeated 1000 times. Recovering time: 1-2 hours. | Leakage current: Not more than specified value. Capacitance Change: Within 15% of initial value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. |
| Change of Temperature Test | Temperature cycle: +20C (3 min), -40C (302 min), +105C (302 min), repeated for 5 cycles. | Leakage current: Not more than specified value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. |
| Damp Heat Test | Exposed for 5008 hours in an atmosphere of 90~95% RH at 402. | Leakage current: Not more than specified value. Capacitance Change: Within 10% of initial value. Dissipation Factor: Not more than 120% of specified value. Appearance: No electrolyte leakage. |
| Solderability Test | Soldering temperature: 2455C, Dipping depth: 2mm, Dipping speed: 252.5mm/s, Dipping time: 30.5s. | Soldering wetting time: Less than 3s. Coating quality: Minimum 95% of the surface being immersed. |
| Vibration Test | 10Hz ~ 55Hz frequency range for 2 hours in each of 3 mutually perpendicular directions. Peak amplitude: 1.5mm. Sweep rate: 10Hz ~ 55Hz ~ 10Hz in about 1 minute. | Inner construction: No intermittent contacts, open or short circuiting. No damage of tab terminals or electrodes. Appearance: No mechanical damage, no electrolyte leakage or swelling. Markings legible. |
| Resistance to Solder Heat Test | Immersion into solder bath at 2605C for 101 seconds or 40010C for 10.1 seconds, 1.5~2.0 mm from the body. Recovering time: 1~2 hours. | Leakage current: Not more than specified value. Capacitance Change: Within 5% of initial value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. |
| Vent Test | Applies to products with vent (diameter 6.3mm). DC test with reversed polarity and selected current from Table 2. | The vent shall operate with no dangerous conditions such as flames or dispersion of pieces. |
Packing Information
Packing Label Marked Items: Clint order number, Client part number, Beryl part number, Capacitance, Voltage, Dimension, Packaging quantity, Capacitance tolerance, QC Marking, Lot number, Series.
Packing Types: Bulk Packing, Taped Packing.
2410121955_BERYL-Electronic-Tech-RC016M102LO10-13TH-2A1Et_C2987885.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
