Product Overview
The BERYL Series RG010M471LO6.3*12TA-1A1Et is a radial aluminum electrolytic capacitor designed for use in electronic equipment. This foil-type capacitor meets IEC 60384 standards and offers a capacitance of 470uF with a rated voltage of 10V. It operates within a temperature range of -40C to +105C and has a rated life of 6000 hours at 105C. Key characteristics include a capacitance tolerance of 20%, a maximum leakage current of 19 A, and a maximum ESR of 0.18 at 100KHz/25C. The capacitor is constructed with an aluminum case, PET sleeve, and features a long lead type.
Product Attributes
- Brand: BERYL
- Series: RG
- Type: RADIAL
- Construction Material: Aluminum case, PET sleeve, Rubber (IIR), Paper (Wood/Fibrous plant materials), Anode foil (Al + Al2O3), Cathode foil (Aluminum), Electrolyte (Glycol + Water + Ammonium salt), Adhesive tape (propylene, butyl acrylate)
- Origin: Zhao Qing, Guangdong, China
- Compliance: Meets IEC 60384 standards
- Environmental Compliance: Free from prohibited RoHS/Sony-SS-00259 substances (Cadmium, Lead, Mercury, Hexavalent Chromium, etc.)
Technical Specifications
| Specification | Value | Condition/Notes |
|---|---|---|
| Series | RG | BERYL Series |
| Part Number | RG010M471LO6.3*12TA-1A1Et | Customer P/N: RG010M471LO6.3*12TA-1A1Et |
| Capacitance | 470 F | 120Hz/20 |
| Rated Voltage (WV) | 10 V | |
| Surge Voltage | 16 V | |
| Capacitance Tolerance | 20% | |
| Temperature Range | -40 ~ +105 | |
| Rated Life | 6000 hours | @105 |
| Dimensions (D x L) | 6.3 x 12 mm | |
| Leakage Current (LC) | 19 A | 2min/20, 120Hz |
| ESR (Equivalent Series Resistance) | 0.18 | 100KHz/25 |
| Ripple Current (RC) | 668 mA rms | MAX 105/100KHz |
| Lead Type | Long Lead | TYPE CODE: LO |
| Sleeve Material | PET | Sleeve colour: E |
| Marking Details | BERYL, 10V, 470F, RG(M), E, 105, Date Code (2251) | |
| Standard Atmospheric Conditions | 15 to 35, 45% to 85% RH, 86kPa to 106kPa | For measurements and tests |
| Measurement Conditions | 20 2, 60% to 70% RH, 86kPa to 106kPa | For doubt about results |
| Load Life Test Criteria | Leakage current: Not more than specified value. Capacitance Change: Within 25% of initial value. Dissipation Factor: Not more than 200% of specified value. Appearance: No electrolyte leakage. | IEC60384-4 No. 4.13 |
| Shelf Life Test Criteria | Leakage current: Not more than 200% of specified value. Capacitance Change: Within 25% of initial value. Dissipation Factor: Not more than 200% of specified value. Appearance: No electrolyte leakage. | |
| Terminal Strength - Tensile Force | 5 N (0.51 kgf) | For 0.5mm and less diameter lead wire |
| Terminal Strength - Bending Force | 2.5 N (0.25 kgf) | For 0.5mm and less diameter lead wire |
| Resistance to Solder Heat Criteria | Capacitance Change: Within 5% of initial value. | |
| Damp Heat Test Criteria | Capacitance Change: Within 10% of initial value. Dissipation Factor: Not more than 120% of specified value. | 90~95% RH, 402 for 5008 hours |
| Solderability Test Criteria | Soldering wetting time: Less than 3s | Soldering temperature: 245 5 |
| Vibration Test Criteria | Inner construction: No intermittent contacts, open or short circuiting. No damage of tab terminals or electrodes. Appearance: No mechanical damage in terminal. No leakage of electrolyte or swelling of the case. Markings legible. | 10Hz ~ 55Hz, 1.5mm peak amplitude |
| Vent Test Criteria | Vent shall operate with no dangerous conditions. | For products with vent, diameter 6.3mm |
2507311627_BERYL-Electronic-Tech-RG010M471LO6-3-12TA-1A1E_C2837830.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible