Product Overview
The RG Series miniature aluminum electrolytic capacitors are designed for low impedance and downsized applications, offering high reliability with operating temperatures up to 105 and endurance ratings of 6000 to 10000 hours. These capacitors are ideal for power supply output stages and comply with RoHS 2.0 standards. They feature excellent low-temperature characteristics and are built with a safety vent for larger case sizes (8mm and up).
Product Attributes
- Series: RG Series
- Type: Miniature Aluminum Electrolytic Capacitors
- Compliance: RoHS 2.0 Compliant
- Construction: Safety Vent (8mm up)
Technical Specifications
| Category | Specification | Details |
|---|---|---|
| Operating Temperature Range | Category Temperature Range | -40 ~ +105 |
| Voltage Range | Rated Voltage Range | 6.3 ~ 100V.DC |
| Capacitance Tolerance | Capacitance Tolerance | 20%(M) (at 20, 120Hz) |
| Leakage Current | Leakage Current | I0.01CV or 3A, whichever is greater (After 2 minutes application of rated voltage) |
| Dissipation Factor | Dissipation Factor (tan Max.) | See table below for values by rated voltage. Additional 0.02 for every 1000F exceeding 1000F. (at 20, 120Hz) |
| Low Temperature Characteristics | Impedance Ratio Z(-25)/Z(+20) | Max. 2 to 4 (depending on rated voltage) (at 120Hz) |
| Low Temperature Characteristics | Impedance Ratio Z(-40)/Z(+20) | Max. 3 to 8 (depending on rated voltage) (at 120Hz) |
| Endurance | Endurance at 105 | 6000~10000 hours (depending on case size) |
| Endurance Requirements | Capacitance Change | 30% or 25% of initial value (depending on rated voltage) |
| Endurance Requirements | D.F.(tan) | 200% of initial specified value |
| Endurance Requirements | Leakage Current | Initial specified value |
| Shelf Life | Shelf Life at 105 (1000 hours) | Capacitance Change 25%, D.F.(tan) 200% of initial, Leakage Current 200% of initial |
| Dimensions | Case Size (D x L) | See table for available sizes (5 to 18) |
| Lead Diameter | d | 0.5mm to 0.8mm |
| Lead Spacing | F | 2.0mm to 7.5mm |
| Lead Length | L | (L<20)1.5mm, (L20)2.0mm |
| Ripple Current Coefficient | Frequency Coefficient | See table for values by frequency (120Hz to 100kHz) and capacitance |
Standard Ratings Table
(Note: Due to the extensive nature of the standard ratings table, only a sample is provided here. Please refer to the original document for the complete list.)
| WV(V) | Cap. (F) | Case size DL (mm) | Impedance (max. 20/100kHz | Max. allowable ripple current at 105 /100kHz |
|---|---|---|---|---|
| 6.3 | 180 | 5X11 | 0.29 | 340 |
| 10 | 120 | 5X11 | 0.29 | 350 |
| 16 | 120 | 5X11 | 0.29 | 340 |
| 25 | 82 | 5X11 | 0.29 | 340 |
| 35 | 47 | 5X11 | 0.29 | 340 |
| 50 | 27 | 5X11 | 0.48 | 238 |
| 63 | 18 | 5X11 | 0.50 | 220 |
| 80 | 12 | 5X11 | 0.80 | 163 |
| 100 | 6.8 | 5X11 | 0.80 | 163 |
Important Note on Endurance
The endurance of aluminum electrolytic capacitors is reduced by internal heating caused by ripple current. For every 5 rise in temperature, the lifetime is halved. To ensure long-term performance, it is crucial to reduce the RMS ripple current during operation.
2410121258_BERYL-Electronic-Tech-RG063M471LO10-20TA-1A1E_C2837907.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
