Product Overview
The RC Series Miniature Aluminum Electrolytic Capacitors are designed for high-performance applications, featuring low impedance and high ripple current capabilities. These capacitors are particularly well-suited for use in switching power supplies. They comply with RoHS 2.0 standards, ensuring environmental responsibility.
Product Attributes
- Brand: RC Series
- Type: Miniature Aluminum Electrolytic Capacitors
- Compliance: RoHS 2.0 Compliant
Technical Specifications
| Category | Specification | Details |
|---|---|---|
| Category Temperature Range | Operating Temperature | -40 ~ +105 |
| Rated Voltage Range | DC Voltage | 6.3 ~ 450V |
| Capacitance Tolerance | 20%(M) (at 20, 120Hz) | |
| Leakage Current | I0.01CV or 3A, whichever is greater (After 2 min. of rated voltage at 20) | |
| I0.02CV+10(A) (After 2 min. of rated voltage at 20) | Note: I=Max. leakage current (A), C=Nominal capacitance (F), V=Rated voltage (V) | |
| Dissipation Factor (tan) | (at 20, 120Hz) | See table for specific voltage ratings. For capacitance > 1000F, add 0.02 for each 1000F increase. |
| Max. Impedance Ratio (at 120Hz) | See table for Z(-25)/Z(+20) and Z(-40)/Z(+20) values at specific voltage ratings. | |
| Endurance (Load Life) | At 105 with rated ripple current applied. | Capacitance change 20% of initial value. D.F.(tan) 200% of initial specified value. Leakage current initial specified value. Endurance: 2000h (5~8), 3000h (10) for 6.3~100V; 3000h (6.3), 5000h (8) for 160~450V. |
| Shelf Life | Storage for 1000 hours at 105 without voltage applied, then restored to 20. | Capacitance change 20% of initial value. D.F.(tan) 200% of initial specified value. Leakage current 200% of initial specified value. |
| Dimensions | Case Diameter (D) | 5, 6.3, 8, 10, 13, 16, 18 mm |
| Lead Spacing (F) | 2.0, 2.5, 3.5, 5.0, 7.5 mm | |
| Lead Diameter (d) | 0.5, 0.6, 0.8 mm | |
| Safety Vent | Included for 8 and larger diameters. |
Standard Ratings Table
(Note: Due to the extensive nature of the standard ratings table, only a representative sample is shown here. Please refer to the original document for a complete list.)
| WV (Vdc) | Cap. (F) | Case Size DL (mm) | Impedance () Max. 20 /100kHz | Rated ripple current (mArms) 105 /100KHz |
|---|---|---|---|---|
| 6.3 | 33 | 511 | 1.0 | 100 |
| 10 | 47 | 511 | 1.0 | 150 |
| 16 | 10,000 | 1840 | 0.015 | 3,810 |
| 25 | 4.7 | 511 | 2.8 | 80 |
| 35 | 100 | 6.311 | 0.250 | 220 |
| 50 | 68 | 812 | 0.630 | 330 |
| 63 | 0.47 | 511 | 6.0 | 68 |
| 100 | 10 | 6.311 | 0.250 | 220 |
| 160 | 10 | 10X16 | 320 | 105 |
| 200 | 10 | 12.5X20 | 450 | 105 |
| 250 | 4.7 | 8X12 | 160 | 105 |
| 350 | 5 | 10X12.5 | 150 | 105 |
| 400 | 1 | 8X12 | 60 | 105 |
| 450 | 2.2 | 8X12 | 105 | 105 |
Important Note on Endurance
The endurance of aluminum electrolytic capacitors is reduced by internal heating caused by ripple current. For every 5 rise in internal temperature, the capacitor's lifetime is halved. To ensure long-term performance, the RMS ripple current must be reduced during operation.
2410121236_BERYL-Electronic-Tech-RC035M102LO10-20H-8A1C_C2837926.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
