<
>
Specifications
Operating Temperature:
-40℃~+105℃
Capacitance:
3.3uF
Height - Seated (Max):
9mm
Voltage Rating:
400V
Pin Spacing:
3.5mm
Diameter:
8mm
Tolerance:
±20%
Mfr. Part #:
RD400M3R3LO8*9TH-2B2Et
Package:
Through Hole,D8xL9mm
Key Attributes
Model Number:
RD400M3R3LO8*9TH-2B2Et
Product Description
Product Overview
This specification sheet details the BERYL RD Series Aluminum Electrolytic Capacitors, specifically the 3.3uF/400V, 8*9 model. Designed for use in electronic equipment, these foil-type capacitors meet IEC 60384 standards. They offer a capacitance tolerance of 20% and a rated operating temperature range of -40 to +105. Key characteristics include a leakage current of 36A (max) and an ESR of 0.085 (max) at 100KHz/25. These capacitors are built with high-quality materials including aluminum anode and cathode foils, and a PET sleeve.
Product Attributes
- Brand: BERYL
- Series: RD
- Type: Radial
- Construction Material: Aluminum foil (Anode & Cathode), PET Sleeve
- Compliance: Meets IEC 60384 standards
- Certifications: RoHS compliant (Environment-related Substances)
Technical Specifications
| Series | Capacitance (uF) | Rated Voltage (V) | Size (mm) D x L | Temperature Range (C) | Capacitance Tolerance | Life (hours) @105C | DF (%) (MAX) @120Hz/20C | LC (A) (MAX) 2min/20C | ESR () (MAX) @100KHz/25C | RC (mA rms) (MAX) @105C/120Hz | Surge Voltage (V) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RD | 3.3 | 400 | 8 x 9 | -40~+105 | 20% | 8000 | 24 | 36 | 0.085 | 440 | - |
Product Dimensions
| Type | D | P | d | a (L<20) | a (L20) |
|---|---|---|---|---|---|
| 5 | 5 | 2 | 0.5 | 1.5 | 2.0 |
| 6.3 | 6.3 | 2.5 | 0.5 | ||
| 8 | 8 | 3.5 | 0.5/0.6 | ||
| 10 | 10 | 5 | 0.6 | ||
| 13 | 13 | 5 | 0.6 | ||
| 16 | 16 | 7.5 | 0.8 | ||
| 18 | 18 | 7.5 | 0.8 | ||
| 22 | 22 | 10 | 0.8 |
Part Number Breakdown
RD 400 M 3R3 LO 8*9 TH-2B2 E t
- Series Name: RD
- Rated Voltage: 400 (400V)
- Capacitance Tolerance: M (20%)
- Rated Capacitance: 3R3 (3.3uF)
- Lead Type: LO (Long Lead)
- Size: 8*9 (8*9mm)
- Sleeve Material: E (PET)
- Date Code: t (week)
Product Marking
Front Marking Sample: 3.3uF RD(M) 2216
Reverse Marking Sample: 400V
- 1) Trademark: BERYL
- 2) Working Voltage: 400V
- 3) Nominal Capacitance: 3.3uF
- 4) Cathode Marked
- 5) Series Symbol & Nominal Capacitance Tolerance: M (-20% ~ +20%)
- 6) Sleeve Material: E (PET)
- Maximum Operating Temperature: 105
- 7) Date Code: 2216 (Manufactured year 2022, Week 16)
Performance Characteristics
| Item | Performance | Condition | Criteria |
|---|---|---|---|
| Nominal Capacitance | Capacitance (Tolerance) | 120Hz12Hz, Not more than 0.5Vrms +1.5~2.0V.DC, 202 | Shall be within the specified capacitance tolerance. |
| Leakage Current | I (A) | Connected with a protective resistor (1k10) in series for 2 minutes. | I (A) 0.02CV+10(A) |
| Dissipation Factor | DF (%) | Nominal capacitance, specified frequency, voltage and temperature. | Must be within the parameters (See page 3). |
| Impedance | Z () | 100kHz, 202, Measuring point: 2mm max. from the surface of a sealing rubber on the lead wire. | Must be within the parameters (See page 3). |
| Load Life Test | Various characteristics | IEC60384-4 No. 4.13 methods, Max operating temp 2C, DC bias voltage + rated ripple current for Rated life +48/0 hours. Tested after 16 hours recovery. | Leakage current: Not more than specified value. Capacitance Change: Within 20% of initial value. Dissipation Factor: Not more than 200% of specified value. Appearance: No electrolyte leakage. |
| Shelf Life Test | Leakage current, Capacitance Change, Dissipation Factor, Appearance | Stored with no voltage applied at Max operating temp 2 for 1000+48/0 hours. Stabilized at room temp for 16 hours. | Leakage current: Not more than 200% of specified value. Capacitance Change: Within 20% of initial value. Dissipation Factor: Not more than 200% of specified value. Appearance: No electrolyte leakage. |
| Maximum Permissible Ripple Current | RC (mA rms) | Maximum A.C current at 120Hz and maximum operating temperature. | Refer to Table-3 (Frequency Multipliers). |
| Terminal Strength | Tensile & Bending Strength | Applied force to terminals for specified time. | No noticeable changes, breakage, or looseness at the terminal. |
| Temperature Characteristics | Capacitance, DF, Impedance | Various temperatures (-40 to +105). Measured at 120Hz. | See detailed criteria on page 8. |
| Surge Test | Leakage current, Capacitance Change, Dissipation Factor, Appearance | Applied surge voltage with a resistor for 305 seconds, repeated 1000 times. Tested after 1-2 hours recovery. | Leakage current: Not more than specified value. Capacitance Change: Within 15% of initial value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. |
| Change of Temperature Test | Leakage current, Dissipation Factor, Appearance | IEC60384-4 No.4.7 methods, 5 cycles of temperature changes (+20, -40/-25, +105). | Leakage current: Not more than specified value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. |
| Damp Heat Test | Leakage current, Capacitance Change, Dissipation Factor, Appearance | IEC60384-4 No.4.12 methods, 90~95% RH at 402 for 5008 hours. | Leakage current: Not more than specified value. Capacitance Change: Within 10% of initial value. Dissipation Factor: Not more than 120% of specified value. Appearance: No electrolyte leakage. |
| Solderability Test | Soldering wetting time, Coating quality | Soldering temp: 2455, Dipping depth: 2mm, Speed: 252.5mm/s, Time: 30.5s. | Wetting time: Less than 3s. Coating quality: Min 95% of immersed surface. |
| Vibration Test | Inner construction, Appearance, Markings | 10Hz ~ 55Hz, peak amplitude 1.5mm, for 2 hours in 3 perpendicular directions. | No intermittent contacts, open/short circuit, damage, leakage, or swelling. Markings legible. |
| Resistance to Solder Heat Test | Leakage current, Capacitance Change, Dissipation Factor, Appearance | Solder bath at 2605 for 101s or 40010 for 3+0/-1s, 1.5~2.0 mm from body. Tested after 1-2 hours recovery. | Leakage current: Not more than specified value. Capacitance Change: Within 5% of initial value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. |
| Vent Test | Operation of vent | DC test with reversed polarity and selected current (Table 2). Applies to products with vent (diameter 6.3mm). | Vent operates with no dangerous conditions (flames, dispersion of pieces). |
Packing Information
Packing Label Items: Clint order number, Client part number, Beryl part number, Capacitance, Voltage, Dimension, Packaging quantity, Capacitance tolerance, QC Marking, Lot number, Series.
Packing Types: Bulk Packing, Taped Packing, Outer box.
Prohibition to Use Environment-related Substances
This product is warranted to be free from the following substances as per RoHS or Sony-SS-00259:
- Heavy metals: Cadmium, Lead, Mercury, Hexavalent chromium compounds
- Organic Chlorin compounds: PCBs, PCNs, PCTs, Chlorinated paraffins, Other chlorinated organic compounds
- Organic Bromine compounds: PBBs, PBDEs, Other brominated organic compounds
- Tin compounds: Tributyltin, Triphenyltin
- Asbestos
- Specific azo compounds
- Formaldehyde
- Polyvinyl chloride (PVC) and PVC blends
- F, Cl, Br, I (REACH)
2410121955_BERYL-Electronic-Tech-RD400M3R3LO8-9TH-2B2Et_C2987900.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
