<
>
Specifications
Operating Temperature:
-40℃~+105℃
Lifetime:
2000hrs@105℃
Capacitance:
1000uF
Height - Seated (Max):
12mm
Pin Spacing:
3.5mm
Voltage Rating:
10V
Diameter:
8mm
Tolerance:
±20%
Ripple Current:
1.05A@100kHz
Mfr. Part #:
RC010M102LO8*12TH-2A1E
Package:
Through Hole,D8xL12mm
Key Attributes
Model Number:
RC010M102LO8*12TH-2A1E
Product Description
Product Overview
This specification applies to Aluminum electrolytic capacitors (foil type) designed for use in electronic equipment. These capacitors are manufactured to meet IEC 60384 standards, offering reliable performance across a wide temperature range. They are suitable for various electronic applications requiring stable capacitance and low leakage current.
Product Attributes
- Brand: BERYL
- Type: Aluminum Electrolytic Capacitor (Foil Type)
- Compliance: IEC 60384
- Construction Materials:
- Lead: Al and (Fe+Cu+Sn)
- Rubber: EPT / IIR
- Case: Aluminum
- Paper: Wood / Fibrous plant materials
- Anode foil: Al + Al2O3
- Cathode foil: Aluminum
- Electrolyte: Glycol + Water + Ammonium salt
- Sleeve: PET
- Environmental Compliance: Free from RoHS or Sony-SS-00259 prohibited substances (Cadmium, Lead, Mercury, Hexavalent Chromium, Organic Chlorin compounds, Organic Bromine compounds, Tributyltin compounds, Triphenyltin compounds, Asbestos, Specific azo compounds, Formaldehyde, Polyvinyl chloride (PVC) and PVC blends).
Technical Specifications
| Series | Capacitance (uF) | Capacitance Tolerance | Rated Voltage (WV) | Size (mm) D x L | Temperature Range () | Life (hours) | Leakage Current (uA)(MAX) 2min/20 | Dissipation Factor (%)(MAX) 120Hz/20 | ESR ()(MAX) 100KHz/20 | RC (mArms) (MAX)105 /100KHz | Surge Voltage (V) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RC | 1000 | 20% | 10 | 8 x 12 | -40~105 | 2000 | 100 | 19 | 0.18 | 782 | 11.5 |
Product Dimensions
| Type | D | P | d | La | P0.5 | D0.5 |
|---|---|---|---|---|---|---|
| 5 | 2.0 | 0.5 | 5a | |||
| 6.3 | 2.5 | 0.5 | 6.3a | |||
| 8 | 3.5 | 0.5/0.6 | 8a | |||
| 10 | 5.0 | 0.6 | 10a | |||
| 13 | 5.0 | 0.6 | 13a | |||
| 16 | 7.5 | 0.8 | 16a | |||
| 18 | 7.5 | 0.8 | 18a | |||
| 22 | 10.0 | 0.8 | 22a |
Note: 'a' refers to 1.5 (L<20) and 2.0 (L20) for lead length, and 0.5 (D<20) and 1.0 (D20) for diameter.
Part Numbering System
RC 010 M 102 LO 8*12 TH-2A1 E t X-
- Series Name: BL-QM/D-02-214.01
- Rated Voltage: 010 = 10V
- Capacitance Tolerance: M = 20%
- Rated Capacitance: 102 = 1000uF
- Type Code: LO = Long Lead
- Size: 8*12 (D*L)
- Material: E = PET Sleeve
- Date Code: t = week
Product Marking
Capacitors are marked with the following information:
- Trademark (BERYL)
- Working voltage (e.g., 10V)
- Nominal capacitance (e.g., 1000uF)
- Cathode mark
- Series symbol & Nominal capacitance tolerance (e.g., M: -20% ~ +20%)
- Sleeve material (e.g., E: PET)
- Maximum operating temperature (e.g., 105)
- Date code (Year and Week, e.g., 1926 for 2019, Week 26)
Characteristics
Standard Atmospheric Conditions: Ambient temperature: 15C to 35C, Relative humidity: 45% to 85%, Air pressure: 86kPa to 106kPa. For critical measurements: Ambient temperature: 20C 2C, Relative humidity: 60% to 70%, Air pressure: 86kPa to 106kPa.
Operating Temperature Range:
- (6.3~400WV): -40C to +105C
- (450~500WV): -25C to +105C
Performance Tests
| Item | Performance | Condition | Criteria |
|---|---|---|---|
| 1 | Nominal Capacitance (Tolerance) | Freq: 120Hz12Hz, Voltage: 0.5Vrms +1.5~2.0V.DC, Temp: 202 | Within specified capacitance tolerance. |
| 2 | Leakage Current | Series resistor (1k10) for 2 min. | 0.01CV or 3A (whichever is greater). |
| 3 | Dissipation Factor | Nominal capacitance, specified frequency, voltage, and temperature. | Within parameters (See page 3). |
| 4 | Impedance | Freq: 100kHz, Temp: 202, Measuring point: 2mm max. from sealing rubber. | Within parameters (See page 3). |
| 5 | Load Life Test | IEC60384-4 No. 4.13, Max operating temp 2C, DC bias + rated ripple current, Rated life +48/0 hours. Recovering time: 16 hours. | Leakage Current: Not more than specified. Capacitance Change: Within 20% of initial. Dissipation Factor: Not more than 200% of specified. Appearance: No electrolyte leakage. |
| 6 | Shelf Life Test | Max operating temp 2, no voltage applied, 1000+48/0 hours. Stabilized at room temp for 16 hours. | Leakage Current: Specified value. Capacitance Change: Within 20% of initial. Dissipation Factor: Not more than 200% of specified. Appearance: No electrolyte leakage. |
| 7 | Maximum Permissible (Ripple Current, Temperature Coefficient) | Max AC current at 100kHz and max operating temp. | Frequency Multipliers and Temperature Coefficients provided in Table-3. |
| 8 | Terminal Strength | Tensile and bending strength tests on terminals. | No noticeable changes, breakage, or looseness at the terminal. |
| 9 | Temperature Characteristics | Testing at various temperatures (-40C, +20C, +105C). Capacitance, DF, and impedance measured at 120Hz. | Capacitance change within 25% at +105C and 10% at +20C (step 5). DF within limits. Leakage current within limits. Impedance ratio at -40C specified by voltage. |
| 10 | Surge Test | Surge voltage applied with series resistor (100 50)/CR (k) for 305 seconds, repeated 1000 times. Recovering time: 1-2 hours. | Leakage Current: Not more than specified. Capacitance Change: Within 15% of initial. Dissipation Factor: Not more than specified. Appearance: No electrolyte leakage. |
| 11 | Change of Temperature Test | Temperature cycle: +20C (3 min), -40C/-25C (302 min), +105C (302 min). Total 5 cycles. | Leakage Current: Not more than specified. Dissipation Factor: Not more than specified. Appearance: No electrolyte leakage. |
| 12 | Damp Heat Test | 90~95% RH at 402 for 5008 hours. | Leakage Current: Not more than specified. Capacitance Change: Within 10% of initial. Dissipation Factor: Not more than 120% of specified. Appearance: No electrolyte leakage. |
| 13 | Solderability Test | Soldering temp: 2455, Dipping depth: 2mm, Speed: 252.5mm/s, Time: 30.5s. | Soldering wetting time: Less than 3s. Coating quality: Min 95% immersed surface. |
| 14 | Vibration Test | 10Hz ~ 55Hz, peak amplitude 1.5mm, 2 hours in 3 directions. Mounting with bracket if required. | Inner construction: No intermittent contacts, open/short circuits, damage. Appearance: No mechanical damage, electrolyte leakage, or swelling. Markings legible. |
| 15 | Resistance to Solder Heat Test | Solder bath: 2605 for 101s OR 40010 for 10.1s, 1.5~2.0 mm from capacitor body. Recovering time: 1-2 hours. | Leakage Current: Not more than specified. Capacitance Change: Within 5% of initial. Dissipation Factor: Not more than specified. Appearance: No electrolyte leakage. |
| 16 | Vent Test | DC test with reversed polarity and selected current from Table 2. (Applies to products with vent, diameter 6.3) | Vent operates with no dangerous conditions (flames, dispersion of pieces). |
Packing Information
Packing Label Markings: Clint order number, Client part number, Beryl part number, Capacitance, Voltage, Dimension, Packaging quantity, Capacitance tolerance, QC Marking, Lot number, Series.
Packing Types: Bulk Packing, Taped Packing.
2410121955_BERYL-Electronic-Tech-RC010M102LO8-12TH-2A1E_C357594.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
