Product Overview
The PT10-M-V is a general-purpose carbon-based potentiometer designed for various electronic applications. It offers reliable performance with specifications for electrical characteristics, mechanical features, and durability.
Product Attributes
- Product Name: PT10-M-V
- Type: Single-turn Carbon Potentiometer
- Grade: General
Technical Specifications
| Item | Specification | Details |
| ELECTRICAL CHARACTERISTICS | Total Resistance | __K |
| Total Resistance Tolerance | 20% | |
| Resistance Taper | B taper | |
| Power Rating | 0.15W (Linear), 0.07W (Other linear) | |
| Max. operating Voltage | 250V DC (Linear), 125V DC (Other linear) | |
| Residual Resistance | R1-2 10 ; R2-3 10 | |
| Insulation Resistance | 100 M at DC 100 V | |
| Effective stroke of resistance | 220 5 | |
| Rotational Noise | 100 mV | |
| Withstanding Voltage | 1 Minute at DC 100 V | |
| MECHANICAL CHARACTERISTICS | Dimensions | Refer to the separate product chart |
| Total Rotational Angle | 235 10 | |
| Rotational Torque | 10 ~ 150 gf.cm | |
| Shaft Stop Strength | 1kgf.cm min | |
| DURABILITY CHARACTERISTICS | Rotational Life | 10,000 cycles (Resistance change within 15%, Rotational Noise 150mV) |
| Working Temperature | -10 ~ + 70 | |
| Storage Temperature | -20 ~ + 80 | |
| Soldering Heat Characteristic | Auto Soldering: 2605 (31 sec); Manual Soldering: 2805 (31 sec) |
Resistance Value Marking
| TOTAL RESISTANCE VALUE | MARKING CODE | TOTAL RESISTANCE VALUE | MARKING CODE |
| 100 | 101 | 20K | 203 |
| 200 | 201 | 22K | 223 |
| 300 | 301 | 30K | 303 |
| 500 | 501 | 47K | 473 |
| 1K | 102 | 50K | 503 |
| 2K | 202 | 100K | 104 |
| 3K | 302 | 200K | 204 |
| 5K | 502 | 250K | 254 |
| 10K | 103 | 300K | 304 |
| 500K | 504 | ||
| 1M | 105 | ||
| 2M | 205 |
Precautions
Use of chemicals: Avoid contact with ammonia, amines, alkali solutions, aromatic hydrocarbons, ketones, esters, and halogenated hydrocarbons as polycarbonate resins are used.
Use of flux: Avoid using water-soluble flux during soldering to prevent adverse effects on materials.
Soldering: Avoid designs where molten solder flows over the PC board surface to prevent imperfect contacts.
Recommended circuit configuration: Recommended for voltage adjustment. Confirm performance when used for current adjustment.
Residual Resistance: Standard units have silver electrodes with anti-sulfurization coating. Contact for low residual resistance requirements.
Dew condensation: Avoid use in conditions where dew or water drops may occur to prevent insulation failure or shorting.
Operation at Low Temperature: Customized products for smoother operation in low-temperature environments are available upon request.
2509111754_BOCHEN-PT10-M-V-504-500K_C5205090.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
