Product Overview
This document details the specifications for the PT06-M-V potentiometer, a general-grade carbon element potentiometer designed for various electronic applications. It offers precise resistance control with options for different resistance tapers and power ratings.
Product Attributes
- Product Name: PT06-M-V
- Product Type: General Grade Carbon Element Potentiometer (Single Turn)
- Document Number: RVPT06-01
- Version Number: 0/0
- Page: 1/1
- Description: Potentiometer
Technical Specifications
| Item | Specification | Unit | Details |
| ELECTRICAL CHARACTERISTICS | |||
| Total Resistance | __ | K | |
| Total Resistance Tolerance | 20% | ||
| Resistance Taper | Linear (B) | Other Linear | |
| Power Rating | 0.1W | 0.05W | |
| Max. operating Voltage | 100V DC | 50V DC | |
| Residual Resistance | 10 | R1-2 ; R2-3 | |
| Insulation Resistance | 100 | M | at DC 100 V |
| Effective stroke of resistance | 215 5 | ||
| Rotational Noise | 100 | mV | |
| Withstanding Voltage | 100 | V DC | 1 Minute |
| MECHANICAL CHARACTERISTICS | |||
| Dimensions | Refer to the separate product chart | () | |
| Total Rotational Angle | 235 10 | ||
| Rotational Torque | 10 ~ 150 | gf.cm | |
| Shaft Stop Strength | 0.5 | kgf.cm min | |
| DURABILITY CHARACTERISTICS | |||
| Rotational Life | 10,000 | cycles | Resistance change within 15%, Rotational Noise : 150mV |
| Working Temperature | -25 ~ +70 | ||
| Storage Temperature | -25 ~ +80 |
ABBREVIATION OF NOMINAL TOTAL RESISTANCE
| TOTAL RESISTANCE VALUE | MARKING | TOTAL RESISTANCE VALUE | MARKING |
| 100 | 101 | 20K | 203 |
| 200 | 201 | 22K | 223 |
| 300 | 301 | 30K | 303 |
| 500 | 501 | 47K | 473 |
| 1K | 102 | 50K | 503 |
| 2K | 202 | 100K | 104 |
| 3K | 302 | 200K | 204 |
| 5K | 502 | 250K | 254 |
| 10K | 103 | 300K | 304 |
| 500K | 504 | ||
| 1M | 105 | ||
| 2M | 205 |
PRECAUTIONS
Use of chemicals: Avoid contact with ammonia, amines, alkali solutions, aromatic hydrocarbons, ketones, esters, and halogenated hydrocarbons as polycarbonate resins are used.
Use of flux: Avoid using water-soluble flux during soldering to prevent adverse effects on materials.
Soldering: Avoid wiring designs and soldering methods where molten solder flows onto the upper surface of the PC board to prevent imperfect contacts.
Recommended circuit configuration: Recommended for voltage adjustment. If used for current adjustment, confirm under actual operating conditions due to potential influence from contact resistance.
Residual Resistance: Silver printing is used for electrode parts with a sulfurization-proof film. Contact us for low residual resistance requirements.
Dew condensation: Avoid use in conditions where dew or water drops may occur on the resistor surface to prevent insulation degradation or short circuits.
Operation at Low Temperature: For low-temperature environments (e.g., car audio), customized products with comfortable tactile feel can be provided upon request. Please specify when ordering.
2512011519_BOCHEN-PT06-M-V-204-200K_C5205069.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
