<
>
Specifications
Tolerance:
±20%
Power(Watts):
100mW
Number of Turns:
1
Resistance:
1MΩ
Mfr. Part #:
PT06-M-V-105(1M)
Model Number:
PT06-M-V-105(1M)
Key Attributes
Product Description
Product Overview
This document outlines the specifications for the PT06-M-V, a general-grade carbon-element potentiometer. It details electrical, mechanical, and durability characteristics, along with precautions for use, soldering, and circuit configuration. The potentiometer is designed for voltage adjustment applications and offers various resistance values and tapers.
Product Attributes
- Product Name: PT06-M-V
- Description: General-grade carbon-element potentiometer (single turn)
- Doc. No.: RVPT06-01
- Ver. No.: 0/0
- Page: 1/1
Technical Specifications
| Item | Specification | Unit | Notes |
|---|---|---|---|
| ELECTRICAL CHARACTERISTICS | |||
| Total Resistance | K | ||
| Total Resistance Tolerance | 20% | ||
| Resistance Taper | Linear (B) / Other Linear | ||
| Power Rating | 0.1W (Linear B) / 0.05W (Other Linear) | W | |
| Max. Operating Voltage | 100V DC (Linear B) / 50V DC (Other Linear) | V DC | |
| Residual Resistance | 10 | R1-2, R2-3 | |
| Insulation Resistance | 100 M | M | at DC 100 V |
| Effective Stroke of Resistance | 215 5 | ||
| Rotational Noise | 100 mV | mV | |
| Withstanding Voltage | 100 V | V | 1 Minute at DC |
| MECHANICAL CHARACTERISTICS | |||
| Dimensions | Refer to the separate product chart | ||
| Total Rotational Angle | 235 10 | ||
| Rotational Torque | 10 ~ 150 gf.cm | gf.cm | |
| Shaft Stop Strength | 0.5 kgf.cm | kgf.cm | min |
| DURABILITY CHARACTERISTICS | |||
| Rotational Life | 10,000 cycles | cycles | Resistance change within 15%, Rotational Noise: 150mV |
| Working Temperature | -25 ~ +70 | ||
| Storage Temperature | -25 ~ +80 | ||
| Soldering Heat Characteristic | Auto Soldering: 2605 / 31 sec; Manual Soldering: 2805 / 31 sec | / sec |
Resistance Value Marking Code
| Total Resistance Value | Marking Code | Total Resistance Value | Marking Code |
|---|---|---|---|
| 100 | 101 | 20K | 203 |
| 200 | 201 | 22K | 223 |
| 300 | 301 | 30K | 303 |
| 500 | 501 | 47K | 473 |
| 1K | 102 | 50K | 503 |
| 2K | 202 | 100K | 104 |
| 3K | 302 | 200K | 204 |
| 5K | 502 | 250K | 254 |
| 10K | 103 | 300K | 304 |
| 500K | 504 | ||
| 1M | 105 | ||
| 2M | 205 |
Precautions for Use
- Chemicals: Avoid contact with ammonia, amines, alkali solutions, aromatic hydrocarbons, ketones, esters, and halogenated hydrocarbons as they can adversely affect the polycarbonate resin.
- Flux: Avoid using water-soluble flux during soldering, as it can negatively impact the molding material and metal components.
- Soldering: Prevent solder from flowing onto the upper surface of the PC board to avoid imperfect contacts.
- Circuit Configuration: Recommended for voltage adjustment. When used for current adjustment, verify performance under actual operating conditions due to potential influence from contact resistance.
- Residual Resistance: Standard units have a protective anti-sulfurization film over silver electrodes. Contact the manufacturer for low residual resistance requirements.
- Dew Condensation: Avoid use in conditions where dew or water drops may form on the resistor surface to prevent insulation degradation or short circuits.
- Low Temperature Operation: For low-temperature environments, customized products with smoother rotary movement can be provided upon request.
2512011519_BOCHEN-PT06-M-V-105-1M_C5205070.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
