Product Overview
The PT06-K-V is a general-purpose carbon-based potentiometer designed for voltage adjustment applications. It offers a total resistance of up to 1M with a 20% tolerance and a power rating of 0.1W for linear taper and 0.05W for other linear tapers. Key features include a rotational life of 10,000 cycles, a rotational torque of 10-150 gf.cm, and a wide operating temperature range of -25 to +70. This potentiometer is suitable for various electronic circuits where precise voltage control is required.
Product Attributes
- Product Name: PT06-K-V
- Type: General-purpose carbon-based potentiometer
- Taper: Linear (B) and other linear types
- Origin: Not specified
- Material: Carbon-based resistive element, polycarbonate synthetic resin
- Certifications: Not specified
Technical Specifications
| Item | Specification | Details |
|---|---|---|
| 1 ELECTRICAL CHARACTERISTICS | Total Resistance | __K (Refer to ABBREVIATION OF NOMINAL TOTAL RESISTANCE table for values) |
| Total Resistance Tolerance | 20% | |
| Resistance Taper | Linear (B), Other Linear | |
| Power Rating | 0.1W (Linear B), 0.05W (Other Linear) | |
| Max. Operating Voltage | 100V DC (Linear B), 50V DC (Other Linear) | |
| Residual Resistance | 10 (R1-2, R2-3) | |
| 2 MECHANICAL CHARACTERISTICS | Dimensions | Refer to the separate product chart |
| Total Rotational Angle | 235 10 | |
| Rotational Torque | 10 ~ 150 gf.cm | |
| 3 DURABILITY CHARACTERISTICS | Rotational Life | 10,000 cycles (Resistance change within 15%, Rotational Noise 150mV) |
| Working Temperature | -25 ~ +70 | |
| Soldering Heat Characteristic | Auto Soldering: 2605 for 31 sec; Manual Soldering: 2805 for 31 sec |
ABBREVIATION OF NOMINAL TOTAL RESISTANCE
| TOTAL RESISTANCE VALUE | MARKING CODE | TOTAL RESISTANCE VALUE | MARKING CODE |
|---|---|---|---|
| 100 | 101 | 20K | 203 |
| 200 | 201 | 22K | 223 |
| 300 | 301 | 30K | 303 |
| 500 | 501 | 47K | 473 |
| 1K | 102 | 50K | 503 |
| 2K | 202 | 100K | 104 |
| 3K | 302 | 200K | 204 |
| 5K | 502 | 250K | 254 |
| 10K | 103 | 300K | 304 |
| 500K | 504 | 1M | 105 |
| 2M | 205 |
PRECAUTIONS
Use of chemicals: Avoid contact with ammonia, amines, alkali solutions, aromatic hydrocarbons, ketones, esters, and halogenated hydrocarbons, as these can adversely affect the polycarbonate synthetic resin used.
Use of flux: Avoid water-soluble flux during soldering, as it can negatively impact the potentiometer's materials.
Soldering: Prevent solder from flowing onto the upper surface of the PC board to avoid poor contact.
Recommended circuit configuration: Recommended for voltage adjustment (Fig. A). If used for current adjustment (Fig. B), confirm performance under actual operating conditions due to potential influence from contact resistance.
Residual Resistance: Standard units have a sulfurization-resistant film over silver electrodes. Contact for low residual resistance requirements.
Dew condensation: Avoid use in conditions where dew or water drops may form on the resistor surface to prevent reduced insulation or short circuits.
Low Temperature Operation: Customized products for smooth rotary movement in low-temperature environments are available upon request.
2512011519_BOCHEN-PT06-K-V-501-500R_C5205071.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
