Product Overview
The PT06-K-V is a general-purpose carbon-based potentiometer designed for voltage adjustment applications. It offers reliable performance with specifications for electrical, mechanical, and durability characteristics, suitable for various electronic circuits.
Product Attributes
- Product Name: PT06-K-V
- Product Type: General-grade carbon element potentiometer (single-turn)
Technical Specifications
| Item | Specification | Unit | Notes |
| 1 ELECTRICAL CHARACTERISTICS | |||
| Total Resistance | __ | K | |
| Total Resistance Tolerance | 20 | % | |
| Resistance Taper | Linear (B) / Other Linear | B / | |
| Power Rating | 0.1 / 0.05 | W | Linear (B) / Other Linear |
| Max. Operating Voltage | 100 / 50 | V DC | Linear (B) / Other Linear |
| Residual Resistance | 10 / 10 | R1-2 / R2-3 | |
| Insulation Resistance | 100 | M | at DC 100 V |
| Effective stroke of resistance | 215 5 | ||
| Rotational Noise | 100 | mV | |
| Withstanding Voltage | 100 | V DC | 1 Minute |
| 2 MECHANICAL CHARACTERISTICS | |||
| Dimensions | Refer to the separate product chart | ||
| Total Rotational Angle | 235 10 | ||
| Rotational Torque | 10 ~ 150 | gf.cm | |
| Shaft Stop Strength | 0.5 | kgf.cm min | |
| 3 DURABILITY CHARACTERISTICS | |||
| Rotational Life | 10,000 | cycles | Resistance change within 15%, Rotational Noise: 150mV |
| Working Temperature | -25 ~ +70 | ||
| Storage Temperature | -25 ~ +80 | ||
| Soldering Heat Characteristic | 2605 (Auto) / 2805 (Manual) | time: 31 sec | |
Resistance Code Table
| TOTAL RESISTANCE VALUE | MARKING CODE | TOTAL RESISTANCE VALUE | MARKING CODE |
| 100 | 101 | 20K | 203 |
| 200 | 201 | 22K | 223 |
| 300 | 301 | 30K | 303 |
| 500 | 501 | 47K | 473 |
| 1K | 102 | 50K | 503 |
| 2K | 202 | 100K | 104 |
| 3K | 302 | 200K | 204 |
| 5K | 502 | 250K | 254 |
| 10K | 103 | 300K | 304 |
| 500K | 504 | ||
| 1M | 105 | ||
| 2M | 205 |
Precautions
Use of Chemicals: Avoid contact with ammonia, amines, alkali solutions, aromatic hydrocarbons, ketones, esters, and halogenated hydrocarbons as they may adversely affect the polycarbonate resin used.
Use of Flux: Avoid water-soluble flux during soldering to prevent adverse effects on the potentiometer's materials.
Soldering: Prevent solder from flowing onto the upper surface of the PC board to avoid poor contact.
Recommended Circuit Configuration: Recommended for voltage adjustment (Fig. A). If used for current adjustment (Fig. B), confirm performance under actual operating conditions due to potential influence from contact resistance.
Residual Resistance: Standard units have a sulfurization-resistant film over silver electrodes. Contact us for low residual resistance requirements.
Dew Condensation: Avoid use in conditions where dew or water drops may form on the resistor surface to prevent insulation deterioration or short circuits.
Low Temperature Operation: For low-temperature environments, customized products with comfortable tactile feel can be provided upon request. Please specify when ordering.
2512011519_BOCHEN-PT06-K-V-202-2K_C5205073.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
