Product Overview
The PT06-K-V is a general-purpose carbon-based potentiometer designed for voltage adjustment applications. It features a total resistance of __K with a tolerance of 20% and various resistance tapers including linear (B) and other linear types. This potentiometer is suitable for applications requiring a maximum operating voltage of 100V DC for linear taper and 50V DC for other linear types, with a power rating of 0.1W for linear (B) and 0.05W for other linear types. It offers a rotational life of at least 10,000 cycles and operates within a temperature range of -25 to +70.
Product Attributes
- Product Name: PT06-K-V
- Type: General grade carbon element potentiometer (single turn)
- Doc. No.: RVPT06-03
- Ver. No.: 0/0
- Page: 1/1
Technical Specifications
| Item | Specification | Unit |
|---|---|---|
| 1. ELECTRICAL CHARACTERISTICS | ||
| Total Resistance | __ | K |
| Total Resistance Tolerance | 20% | |
| Resistance Taper | Linear (B), Other linear | |
| Power Rating | 0.1W (Linear B) / 0.05W (Other linear) | W |
| Max. operating Voltage | 100V DC (Linear B) / 50V DC (Other linear) | V DC |
| Residual Resistance | 10 (R1-2, R2-3) | |
| Insulation Resistance | 100 M at DC 100 V | M |
| Effective stroke of resistance | 215 5 | |
| Rotational Noise | 100 mV | mV |
| Withstanding Voltage | 1 Minute at DC 100 V | V DC |
| 2. MECHANICAL CHARACTERISTICS | ||
| Dimensions | Refer to the separate product chart | |
| Total Rotational Angle | 235 10 | |
| Rotational Torque | 10 ~ 150 gf.cm | gf.cm |
| Shaft Stop Strength | 0.5kgf.cm min | kgf.cm |
| 3. DURABILITY CHARACTERISTICS | ||
| Rotational Life | 10,000 cycles | cycles |
| Working Temperature | -25 ~ +70 | |
| Storage Temperature | -25 ~ +80 | |
| Soldering Heat Characteristic | Auto Soldering: 2605 (31 sec) Manual Soldering: 2805 (31 sec) | , sec |
ABBREVIATION OF NOMINAL TOTAL RESISTANCE
| TOTAL RESISTANCE VALUE | MARKING | TOTAL RESISTANCE VALUE | MARKING |
|---|---|---|---|
| 100 | 101 | 20K | 203 |
| 200 | 201 | 22K | 223 |
| 300 | 301 | 30K | 303 |
| 500 | 501 | 47K | 473 |
| 1K | 102 | 50K | 503 |
| 2K | 202 | 100K | 104 |
| 3K | 302 | 200K | 204 |
| 5K | 502 | 250K | 254 |
| 10K | 103 | 300K | 304 |
| 500K | 504 | 1M | 105 |
| 2M | 205 |
PRECAUTIONS
Use of chemicals: Avoid contact with ammonia, amines, alkali solutions, aromatic hydrocarbons, ketones, esters, and halogenated hydrocarbons, as polycarbonate resins are used.
Use of flux: Avoid water-soluble flux to prevent adverse effects on materials.
Soldering: Avoid molten solder flowing onto the upper surface of the PC board to prevent imperfect contacts.
Recommended circuit configuration: Recommended for voltage adjustment. For current adjustment, confirm performance under actual operating conditions.
Residual Resistance: For low residual resistance requirements, please contact us. A sulfurization-resistant film is applied over silver electrodes.
Dew condensation: Avoid use in conditions where dew or water drops may occur on the resistor surface to prevent insulation deterioration or short circuits.
Operation at Low Temperature: Customized products with comfortable feel are available for low-temperature environments upon request. Please specify when ordering.
2512011519_BOCHEN-PT06-K-V-502-5K_C5205074.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
