Product Overview
The PT06-K-V is a general-purpose carbon element potentiometer designed for voltage adjustment applications. It offers a total resistance of __K with a tolerance of 20% and a power rating of 0.1W for linear taper and 0.05W for other linear tapers. Key features include a rotational noise of 100 mV and a rotational life of 10,000 cycles. It is suitable for use in environments ranging from -25 to +70.
Product Attributes
- Product Name: PT06-K-V
- Type: General grade carbon element potentiometer (single-turn)
- Doc. No.: RVPT06-03
- Ver. No.: 0/0
- Page: 1/1
- Date: (Not specified)
- Prepared By: (Not specified)
- Reviewed By: (Not specified)
- Approved By: (Not specified)
Technical Specifications
| Item | Specification | Unit |
|---|---|---|
| ELECTRICAL CHARACTERISTICS | ||
| Total Resistance | __ | K |
| Total Resistance Tolerance | 20% | |
| Resistance Taper | Linear (B), Other linear | |
| Power Rating | 0.1 | W (Linear) |
| Power Rating | 0.05 | W (Other linear) |
| Max. operating Voltage | 100 | V DC (Linear) |
| Max. operating Voltage | 50 | V DC (Other linear) |
| Residual Resistance | 10 | (R1-2, R2-3) |
| Insulation Resistance | 100 | M at DC 100 V |
| Effective stroke of resistance | 215 5 | |
| Rotational Noise | 100 | mV |
| Withstanding Voltage | 100 | V DC for 1 Minute |
| MECHANICAL CHARACTERISTICS | ||
| Dimensions | Refer to the separate product chart | |
| Total Rotational Angle | 235 10 | |
| Rotational Torque | 10 ~ 150 | gf.cm |
| Shaft Stop Strength | 0.5 | kgf.cm min |
| DURABILITY CHARACTERISTICS | ||
| Rotational Life | 10,000 | cycles |
| Working Temperature | -25 ~ +70 | |
| Storage Temperature | -25 ~ +80 | |
| Soldering Heat Characteristic (Auto) | 2605, 31 sec | |
| Soldering Heat Characteristic (Manual) | 2805, 31 sec |
ABBREVIATION OF NOMINAL TOTAL RESISTANCE
| TOTAL RESISTANCE VALUE | MARKING | TOTAL RESISTANCE VALUE | MARKING |
|---|---|---|---|
| 100 | 101 | 20K | 203 |
| 200 | 201 | 22K | 223 |
| 300 | 301 | 30K | 303 |
| 500 | 501 | 47K | 473 |
| 1K | 102 | 50K | 503 |
| 2K | 202 | 100K | 104 |
| 3K | 302 | 200K | 204 |
| 5K | 502 | 250K | 254 |
| 10K | 103 | 300K | 304 |
| 500K | 504 | ||
| 1M | 105 | ||
| 2M | 205 |
PRECAUTIONS
Use of chemicals: Avoid contact with ammonia, amines, alkali solutions, aromatic hydrocarbons, ketones, esters, and halogenated hydrocarbons, as these can adversely affect the polycarbonate resin used in the potentiometer.
Use of flux: Avoid using water-soluble flux during soldering, as it can negatively impact the potentiometer's materials.
Soldering: Prevent solder from flowing onto the upper surface of the PC board to avoid contact issues.
Recommended circuit configuration: It is recommended to use the potentiometer for voltage adjustment (Fig. A). If used for current adjustment (Fig. B), confirm performance under actual operating conditions due to potential influence from contact resistance.
Residual Resistance: The standard product has a protective film over the silver electrodes. Contact us for low residual resistance requirements.
Dew condensation: Avoid use in conditions where dew or water drops may form on the resistor surface to prevent insulation deterioration or short circuits.
Operation at Low Temperature: For low-temperature environments, customized products with smoother rotary movement are available upon request. Please specify this requirement when ordering.
2512011519_BOCHEN-PT06-K-V-504-500K_C5205080.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
